bilge pump page 3

Rule Fully-Automatic Bilge Pump - 500 GPH Rule's completely submersible, fully-automatic bilge pumps eliminate the need for external float switches. These pumps turn on every 2-1/2 minutes for about one second to sense for water; if water is present the pump will run until all water is removed, then it will return to the sensing mode. Features include easy clean snap-lock strainer bases, silent, vibrationless operation, anti-airlock protection, stainless steel shafts, and no burn-out when run dry. 12VDC.
52.99 USD

An internal computer chip cycles these pumps on every 2.5 minutes, then quickly shuts them down if no water is detected. 500gph pump is designed to handle spray and rainwater. The built-in strainer bases snap off to make cleaning easy. Completely submersible, rust and corrosion-proof and ignition-protected. Includes 3-way wiring for connecting to a switch for manual override or indicator light. Material: Plastic Dimensions: 4"H x 2 3/8"W Port Sizes: 3/4" Warranty: Three years 500gph Draw: 1.9A Built-in switch cycles every 2.5 minutes Warranty: Three years
59.99 USD

Original replacement strainer base for your Rule Bilge Pump
8.99 USD

Original replacement strainer base for your Rule Bilge Pump
6.29 USD

Original replacement strainer base for your Rule Bilge Pump
9.49 USD

Replacement Strainer Base for Rule Mate Bilge Pumps Original replacement strainer bases for your Rule Bilge Pump. For Rule Mate pumps.
6.99 USD

Powerful, lightweight bilge pump. Constructed entirely from non-corroding materials. The Titan has a quick release clamp for speedy maintenance. The removable handle can be oriented in any direction. Surface mount and thru-deck mount models available. gpm: 28 Material: Plastic Dimensions: 15-9/16"H x 9-1/4"W x 17-1/4"L Port Sizes: 1-1/2" Warranty: Five years
219.99 USD

Powerful, lightweight bilge pump. Constructed entirely from non-corroding materials. The Titan has a quick release clamp for speedy maintenance. The removable handle can be oriented in any direction. Surface mount and thru-deck mount models available. gpm: 28 Material: Plastic Dimensions: 15-9/16"H x 9-1/4"W x 17-1/4"L Port Sizes: 1-1/2" Warranty: Five years
177.99 USD

Jabsco Diaphragm Bilge Pumps Self-priming design so you can mount the pump in a convenient location. Each includes a Pumpgard pump strainer (except 10.8-gpm models). 10.8-gpm models meet USCG requirements for subchapter T vessels
399.99 USD

Jabsco Diaphragm Bilge Pumps Self-priming design so you can mount the pump in a convenient location. Each includes a Pumpgard pump strainer (except 10.8-gpm models). 10.8-gpm models meet USCG requirements for subchapter T vessels
519.00 USD