Your search for 'illuminated push button Momentary Switch On/Off' generated 5188 results Generate product results for illuminated push button Momentary Switch On/Off as RSS

Page 4 / 519
<< 1  2  3  4  5  6  7  8  9  10   >>

Illuminated Rocker Switch - w/ 4 snap-in colored lenses SPST Off-On Independent Pilot light

Illuminated Rocker Switch  - w/ 4 snap-in colored lenses SPST Off-On Independent Pilot light Illuminated Rocker Switch - w/ 4 snap-in colored lenses SPST Off-On Independent Pilot light 25 amp load @ 12v DC. Silver contacts, brass blade terminals, a sealed black plastic housing, bezel and actuator make these switches weather resistant. Supplied with 1 each amber, clear, red and green lens. Snap-in the lens of your choice. Independent pilot light comes on with load not switch position. Snaps into 0.83" x 1.45" (21.08mm X 36.83 mm) hole. Fits panels up to .187" (4.75 mm thick)
12.99 USD

Push-Pull Switches Switch - Off/On, Not gasket sealed

Push-Pull Switches Switch - Off/On, Not gasket sealed Normally off, with a variety of connections when pulled. Heavy-duty, noncorrosive construction with moisture-repellant insulators. Brass case, stem, terminals and mounting hardware All knobs are screw-on type 6-36V DC Stems: 3/8" diameter x 1 1/4"L
18.99 USD

Lighted - SPST, On/Off, 4 Blade Toggle Switch

Lighted - SPST, On/Off, 4 Blade Toggle Switch 4 blade toggle switch. Tip of toggle illuminated Red in On position, illuminated clear in OFF position. 25 Amps at 12VDC Round lens in toggle tip Silver contacts Black housing actuator Off-On SPST 4 blade terminals
19.99 USD

Battery Switches Battery Switch - Off/On

Battery Switches Battery Switch - Off/On Interrupts the field current to protect non-unitized alternators from damage if turned off with the engine runningRated for 250A continuous/360A intermittent, with copper contacts and brass terminals. We strongly recommend field disconnect battery switches (or fail safe diodes) to eliminate the chance of alternator damage due to inadvertent switching. Surface-mount. Marine UL-listed. Each ShWt 2 Continuous Amps: 250A Max Momentary Rating: 360A Polycarbonate switch with brass terminals and copper contacts Switch Dimensions: 5 1/4"dia. x 2 5/8"D Approvals: UL Listed, CE Warranty: Five Years
39.99 USD

Start/Horn - HEAVY DUTY

Start/Horn - HEAVY DUTY Start/Horn - HEAVY DUTY 10 amps at 12v DC - Momentary push ON button SPST switch. Brass switch body and 18 ga. leads are plasticized to seal out moisture and dirt. Black push button rubber cap. 5/8" stem fits through panels up to 1/2" thick.Model:MP39350
19.99 USD

Push-Pull Switch - 2 Circut SPST

Push-Pull Switch - 2 Circut SPST Normally off, with a variety of connections when pulled. Heavy-duty 10A Off/On switch controls two circuits. Brass case, stem, terminals and mounting hardware All knobs are screw-on type 6-36V DC 3/8" Mounting shaft, for panels to 1" thick Stems: 3/8" diameter x 1 1/4"L
19.99 USD

Push Button Latches Push Button Latch, Chrome Plated

Push Button Latches Push Button Latch, Chrome Plated Polished Push Button Latches includes striker plate. Sold individually.
38.99 USD

Push-Pull Switches Switch - 3 Position, Off/On #1/ On #2

Push-Pull Switches Switch - 3 Position, Off/On #1/ On #2 Normally off, with a variety of connections when pulled. Heavy-duty, noncorrosive construction with moisture-repellant insulators. Brass case, stem, terminals and mounting hardware All knobs are screw-on type 6-36V DC Stems: 3/8" diameter x 1 1/4"L
20.99 USD

Back Covers for Illuminated 12V Switch Panels 3 Switch Panel Back Cover

Back Covers for Illuminated 12V Switch Panels 3 Switch Panel Back Cover Back covers for illuminated 12V switch panels
19.99 USD

Back Covers for Illuminated 12V Switch Panels 4 Switch Panel Back Cover

Back Covers for Illuminated 12V Switch Panels 4 Switch Panel Back Cover Back covers for illuminated 12V switch panels
11.99 USD

<< 1  2  3  4  5  6  7  8  9  10   >>