Kunden Log-In
|
Your search for '12 volt 25 Amp switch' generated 8450 results  Page 6 / 845
Illuminated Rocker Switch - w/ 8 snap-in colored lensesSPST On-On 1 Dependent Pilot Light & 1 ndependent Pilot light 25 amp load @ 12v DC. Silver contacts, brass blade terminals, a sealed black plastic housing, bezel and actuator make these switches weather resistant. Supplied with 2 each amber, clear, red and green lenses. Snap-in the lens of your choice. Independent pilot light comes on with load not switch position. Dependent pilot light comes on when switch is on. Snaps into 0.83" x 1.45" (21.08mm X 36.83 mm) hole. Fits panels up to .187" (4.75 mm thick) -
15.99 USD
Big Foot Dimmer Contol Switch Control your interior or exterior lighting with this marine grade dimmer control switch. 12 Volts and it is easy to install!
29.99 USD
Automatic Float Switch The Automatic Float Switch converts any bilge pump that draws 12-amps (at 12 VDC) or less to fully automatic operation. It features a compact, low profile design that mounts on any surface from horizontal up to a 24 angle. It incorporates a reliable and affordable mechanical switch that actuates your bilge pumps motor at a 2'' water level. The sealed switch mechanism resists moisture, fume-ignition, and electrical shock.
28.99 USD
Illuminated Rocker Switch - w/ 4 snap-in colored lenses SPST Off-On Independent Pilot light 25 amp load @ 12v DC. Silver contacts, brass blade terminals, a sealed black plastic housing, bezel and actuator make these switches weather resistant. Supplied with 1 each amber, clear, red and green lens. Snap-in the lens of your choice. Independent pilot light comes on with load not switch position. Snaps into 0.83" x 1.45" (21.08mm X 36.83 mm) hole. Fits panels up to .187" (4.75 mm thick)
12.99 USD
Illuminated Rocker Switch- w/ 8 snap-in colored lensesSPDT On-Off-On 2 Dependent Pilot Lights 25 amp load @ 12v DC. Silver contacts, brass blade terminals, a sealed black plastic housing, bezel and actuator make these switches weather resistant. Supplied with 2 each amber, clear, red and green lenses. Snap-in the lens of your choice. Each dependent pilot light illuminates when switch is on for that load. Snaps into 0.83" x 1.45" (21.08mm X 36.83 mm) hole. Fits panels up to .187" (4.75 mm thick)
15.99 USD
Illuminated Rocker Switch - w/ 4 snap-in colored lensesSPST Off-On Dependent Pilot Light 25 amp load @ 12v DC. Silver contacts, brass blade terminals, a sealed black plastic housing, bezel and actuator make these switches weather resistant. Supplied with 1 each amber, clear, red and green lens. Snap-in the lens of your choice. Dependent pilot light illuminated when switch is on only. Snaps into 0.83" x 1.45" (21.08mm X 36.83 mm) hole. Fits panels up to .187" (4.75 mm thick) -
12.99 USD
Heavy Duty Foot Switch This uncovered high-amp footswitch is capable of handling windlass loads without an external solenoid or control box. 200 Amp continuous rating at 12V. Uncovered footswitch features a chromed-bronze trim ring. 4" dia.
39.99 USD
12 Volt DC Under Counter/Work Light Under counter modern styling White plastic housing and lens Rocker switch 12 Volt, 20 Watts Includes 2 bulbs (12 volt, 10 watt Xenon bulbs) 9.75"W x 2.52"D x 1.38"H
35.99 USD
12 Volt DC Under Counter/Work Light Under counter modern styling White plastic housing and lens Rocker switch 12 Volt, 20 Watts Includes 2 bulbs (12 volt, 10 watt Xenon bulbs) 9.75"W x 2.52"D x 1.38"H
35.99 USD
Sensor Max VSD Constant Pressure Water Pump The Sensor Max 14 with 3.7 GPM or The Sensor Max 17 with 4.5 GPM is a new pressure sensor controlled, multi-outlet water pressure pump, with variable speed drive, serve 1-5 outlets. Motor speed is electronically controlled to maintain steady flow and constant pressure. Sensor Max VSD accepts from 10 to 29 Volt DC for use with 12 or 24 Volt DC power. Amp draw reduces as flow reduces to conserve energy, ranging from less than 1 amp to a maximum of 10 amps. Unique constant water pressure-no pressure switch. Electronically controlled variable flow. Up to 3.7 gpm. Self-priming up to 10 ft. Gives constant flow and hot water mix. Eliminates accumulator tank. Runs silently under normal use. Automatically adjusts to 12 Volt DC or 24 Volt DC power. Conserves battery power by using lower amps at lower flow. True sensor regulated water pressure. Thermal overload protection automatically stops motor should it overheat due to overload, with auto re-start feature. Diaphragm design allows extended dry running. Connections for 1/2" ID hose or 1/2" Qest threads.
229.99 USD
|