12v outlet surface

3" Flangemount Blower 12V Reinforced plastic housing holds a low vibration, heavy duty, balanced motor on Par's flange mount and flexmount blowers. Duct hose slips on to both the inlet and outlet ports on the flexmount blowers, while the flange mount is designed to be mounted on a flat external surface with a single hose connected to the inlet.
59.99 USD

Switch Panel with Battery Test & 12V Outlet This innovative three gang switch panel has a battery test switch and gauge built in. Features a cigarette lighter plug with a 15amp fuse. Also includes 3 amp, 5amp and 10 amp fuses for the illuminated switches. Dimensions: 4 1/2''W x 6 1/2''L.
53.39 USD

Convert a single 12V receptacle into a dual or triple outlet. Each unit features an LED status indicator light Internal fuse protection
12.99 USD

Extend and expand your 12V systemAdd an extra 12V accessory receptacle and at the same time extend the reach of your 12V devices by 12" LED power status indicator Weatherproof seal on the plug
18.99 USD

Crown Electric Head 12V Classic, proven design preferred by boaters for years. The Crown Head's efficiency is due mainly to its high performance standards, but is also the result of the low and easy maintenance features like the built-in deodorant system. It not only deodorizes the bowl with every flush, it also lubricates the head's working parts. Front access to the macerator, a removable intake pump and motor cover makes this head's maintenance quick and easy. Continuous duty solenoid required for installation. 12V. Draws 36 amps. 3/4" inlet, 1-1/2" outlet. 17"H x 11-7/8"W x 17"D
1099.99 USD

Black 6 Gang 12V/15A Rocker W/Outlet Three 2-Way Illuminated Rocker Switches (Red); 10 Square Fuse Holders and a covered 12v outlet with cap. Black ABS body is non-corrosive; Labels included (Anchor Light, Bilge Pump, Wiper, and Side Lights, Comp. Light, Sea Water Pump, Top Light, Deck Light, Search Light, Blower, Cabin Light 1, Cabin Light 2, Horn, Refrigerator, Radio, Water Pump, Hand Lamp, Extra, TV, Nav. Lights, Power 24V, Power 12V, Power 6V).S-8089CSh. Wt.2 lbs.5 1/2" x 2 15/16
71.99 USD

Manufactured from corrosion resistant marine grade materials with a unique interconnecting system that securely locks the plug into the receptacle resulting in a positive and moisture proof connection. Heavy duty cable/18 gauge wire Watertight caps Plug features an LED indicator light, moisture proof sealing ring, strain relief and built-in 10A fuse SeaLink locking system Works with any standard 12V plug and receptacle Cables stretch to over one foot
43.99 USD

Black 3 Gang 12V/15A Panel W/Outlet Three 2-Way Illuminated Rocker Switches (Red); 4 Square Fuse Holders and power outlet, Black ABS body is non-corrosive; Labels included (Anchor Light, Bilge Pump, Wiper, Side Lights, Comp. Light, Sea Water Pump, Top Light, Deck Light, Search Light, Blower, Cabin Light 1, Cabin Light 2, Horn, Refrigerator, Radio, Water Pump, Hand Lamp, Extra, TV, Nav. Lights, Power 24V, Power 12V, Power 6V).S-8099CSh. Wt.2 lbs.5 1/2" x 2 15/16"
38.99 USD

These blowers are constructed with tough, reinforced plastic housings and a one-piece balanced rotor for maximum corrosion resistance in marine environments. Flexmount models have both inlet and outlet ports designed for slip-on flexible-duct connections. The blower may be rotated in the mounting bracket to permit installation with the discharge port in any direction. Flangemount models are generally mounted with the discharge port fastened directly to a flat external surface to minimize ducting. The inlet port can be connected with duct hose to the area requiring ventilation. Tough, reinforced plastic housings one-piece balanced rotor
144.99 USD

These blowers are constructed with tough, reinforced plastic housings and a one-piece balanced rotor for maximum corrosion resistance in marine environments. Flexmount models have both inlet and outlet ports designed for slip-on flexible-duct connections. The blower may be rotated in the mounting bracket to permit installation with the discharge port in any direction. Flangemount models are generally mounted with the discharge port fastened directly to a flat external surface to minimize ducting. The inlet port can be connected with duct hose to the area requiring ventilation. Tough, reinforced plastic housings one-piece balanced rotor
149.99 USD