90 degree fitting hose barb

Drain Fitting (2" drains) 90 Degree for 1" Hose Available in 90 degree configurations, this drain is designed for a 1" hose and 2" drain size. Made of bright chrome plated, non-corrosive plastic.
24.99 USD

Designed to fit 2-1/16" drain openings, these fittings feature mirror-polished, 304 stainless steel flanges. The slight downward slant of the Low-Profile 90 drain s hose barb promotes better drainage and unlike some others, it fits standard 1"ID hose. Both include stainless steel stoppers and chains
18.99 USD

90 Fitting, 1" NPT x 1.25" Hose
35.99 USD

Bronze Pipe to Hose Adapter, 90 Degree Elbow Used to connect hoses to seacocks, strainers, or valves. NPT thread.
8.99 USD

Kits include all fittings needed to attach hoses to a water tank. All fittings screw into the tank. The opposite end of the fitting accepts the hose. Teflon tape is supplied for easy installation and to ensure a tight fit. Two 1/2" hose barbs One 1-1/2" hose barb Teflon tape and instructions
15.99 USD

Hold Tank Strait Pipe-Hose Adpt Kit Holding Tank Straight Pipe-to-Hose Adapter Kit (93-2220) and Holding Tank 90 degree Pipe-to-Hose Adapter Kit (93-2221) Kits include all fittings needed to attach hoses to a holding tank. All fittings screw into the tank. The opposite end of the fitting accepts the hose. Teflon tape is supplied for easy installation and to ensure a tight fit.Holding Tank Kits include one 1/2" hose barb,two 1-1/2" hose barbs, Teflon tape and instructions. 93-2220Straight KitSh. Wt. 1 lb.
16.99 USD

1/4 NPT x 3/8" Brass hose barb with female threads
4.99 USD

Plastic Pipe to Hose Adapter, 90 Degree Elbow Used to connect hoses to valves, water pressure pumps, and deck drains. Tough Nylon material. NPT thread.
1.59 USD

Groco Full Flow Tailpieces These fittings are designed to accommodate full pipe size flow and provide unrestricted passage through the fitting. For instance, if a 3/4 fitting is to provide full flow through the fitting and still have a safe wall thickness, the fitting OD must be larger than 3/4 . Therefore, a hose ID larger than the pipe size is required (ie: FF-1000 is for 1 pipe and 1 1/4 ID hose). Pipe adapters are cast bronze Generous hex nut cast in Generous seating area for double clamping
19.99 USD

Groco Full Flow Tailpieces These fittings are designed to accommodate full pipe size flow and provide unrestricted passage through the fitting. For instance, if a 3/4 fitting is to provide full flow through the fitting and still have a safe wall thickness, the fitting OD must be larger than 3/4 . Therefore, a hose ID larger than the pipe size is required (ie: FF-1000 is for 1 pipe and 1 1/4 ID hose). Pipe adapters are cast bronze Generous hex nut cast in Generous seating area for double clamping
29.99 USD