Furuno PG500R installation instructions

Aluminum 5" Powertower for Furuno/Sitex A very stylish air foil shaped strut that raises the antenna clear of obstructions to maximize the performance of your antenna. The Power Tower has a compact base to fit on most radar arches and cabin roofs. Mounting holes are predrilled for both the base of the strut and the antenna. A grommet is also provided for easy cable entry.
149.99 USD

Aluminum 10" Powertower for Furuno/Si-Tex A very stylish air foil shaped strut that raises the antenna clear of obstructions to maximize the performance of your antenna. The Power Tower has a compact base to fit on most radar arches and cabin roofs. Mounting holes are predrilled for both the base of the strut and the antenna. A grommet is also provided for easy cable entry.
249.99 USD

Installation Kits (sold separately) provide enough screws for 80' of rail, end caps, and instructions. 342140 is used for Style #3, has #10 fasteners 342090 is used for Style #7, has #14 fasteners 1954932 is a swim platform rub rail kit. Measures 12-1/2"L x 1"W x 1/4"H
127.99 USD

Transducers and fairing blocks for Furuno fishfinders and accessories for GP1650. Models 392400 and 392590 are for use with Furuno LS6000, FCV600L, GP1650F/DF 392590 is a bronze thru-hull with speed and temp. 600Watt, 50/200kHz, 40/10 degree beam angles. 392400 is a plastic transom mount with temperature and removable speed assembly, 10-pin connector. Models 392160 and 392350 are for the FCV-667 (50/200 kHz, Speed/Temp) 392160 is a plastic transom mount with temperature and removable speed assembly, 8-pin connector. Models 223169 and 107276 are accessories for GP1650
8.55 USD

Protect your boat from rain, snow, UV damage, airborne debris and pests during winter storage During long periods of storage, your uncovered boat is susceptible to damage from a number of sources rain, snow, blowing dirt and debris, bird droppings, UV radiation and nesting birds and rodents. While a conventional cover or tarp offers your boat some protection from the elements, only a shrink-wrap cover gives it protection that s 100% waterproof, impossible to blow off and that can withstand heavy loads of snow or rain. Wrap-It-Up is a do-it-yourself shrink-wrap system that provides your boat with the protection it deserves during the long off-season. Developed exclusively for West Marine, the system consists of three kits that provide everything needed to shrink-wrap your boat yourself: Hardware Kit: Includes all the tools you need to wrap your boat: a propane heat tool with 25' hose and regulator, training video, safety gloves and glasses, shrink-wrap cutting knife and complete instructions. Buy it once and reuse it year after year. Installation Kit: One roll of 3/4" x 300' woven strapping, one roll of 2" x 30' shrink-wrap tape, four self-adhesive air vents, ten 3/4" strap-tightening buckles and one prepaid "REBAG" recycling kit. Buy a new kit every year. Shrink-Wrap Kit: One roll of shrink wrap, sized for your boat. Purchase a new kit every year.
89.99 USD

Fuel Tank Installation Kit Tank installation kit includes "Gas" deck fill, 18" of fill hose (11/2"), 36" of vent hose (5/8"), (4) 2 1/4" hose clamps, (1) 5/8" Fuel Vent.
59.99 USD

Bravo Outdrive Installation Kit Fits Bravo drives. Part # : 16755Q 1 Sh. Wt. 1 lb.
8.99 USD

Outdrive Installation Kit Fits MC-I drives (s/n 6225576 & below) (1967-1982) Part # : 27-64818Q 4Sh. Wt. 1 lb.
7.99 USD

Muffler Installation Accessory Made from the highest quality Fire Retardant Resins, the Vernatube is a proven industry standard for wet exhaust installations. There is no other that compares in quality and performance.
34.99 USD

Drive Installation Kit 1983 & Newer Fits R, MR, Alpha One & Gen II drives (s/n 6225577 and above)(1983 & newer) Part # : 27-94996Q 2Sh. Wt. 1 lb.
8.99 USD