http://cas-yachts.com/aos/GROUPER/ cas-yachts.com/aos results for GROUPER. Compare products and prices in many shops at once. 79 1 10 Fri, 10 Oct 2008 22:41:07 +0100 Fri, 10 Oct 2008 22:41:07 +0100 en info@cas-yachts.com AOS RSS Generator (http://automaticonlineshop.com) http://cas-yachts.com/aos/openeurl/page1/6833070/ http://cas-yachts.com/aos/openeurl/page1/6833070/ GROUPER Grouper Rig The Grouper Rig is made on 30'' of 150lb test monofilament. It utilizes a plated 8/0 heavy hook, a 2/0 SeaStriker Swivel, and an egg sinker with beads on each end. All rigs are crimped with Micropress sleeves. Fri, 10 Oct 2008 22:41:05 +0100 http://cas-yachts.com/aos/openeurl/page1/6833071/ http://cas-yachts.com/aos/openeurl/page1/6833071/ GROUPER Supplements your boat's existing anodes An excellent anodic device to supplement a vessel s existing anode system, especially to counteract stray current from defective shore power. Clip to bolt on outdrive Clip to grounding strap if possible or wire items together with copper wire and clip to wire Do not connect to negative battery terminals Dimensions: 8 1/4"L x 3 1/4"W x 1 3/8"D Cable length 15' Fri, 10 Oct 2008 22:41:05 +0100 http://cas-yachts.com/aos/openeurl/page1/6833072/ http://cas-yachts.com/aos/openeurl/page1/6833072/ GROUPER O'Shaughnessy SS Grouper Hook - 50-Pkg. Unmatched StrengthOur unique three-stage computer controlled tempering process transforms the hook into a fine grained, ultrastrong microstructure. This increases strength up to 30 per cent compared to conventional tempering methods. However, it's not only strength that is important in this process; Mustad has strict quality controls over the brittleness and flexibility of their hooks as well. Mustad's superior technology allows us such control of the final outcome.Surface treatmentMustad hooks feature a wide range of colors and finishes, from black nickel and gold to bronze. The special coatings have been developed to suit the various types of fishing. E.g. Duratin is used for long lining hooks and lacquer for freshwater. Mustad also manufactures stainless-steel hooks in a limited selection. The challenge within this field is to increase the rust resistance of our products even more. Rust ResistanceExperienced fishermen will select their hooks to match the bait or to suit their method of fishing and local conditions. Some hooks are made for specific purposes and are thus available only in one finish, while other patterns come in a variety of coatings. Different coatings have different features and properties. This entails that the rust resistance of the hooks may vary. Mustad runs tests showing how the various coatings compare in this respect. These tests are carried out in accordance with the ASTM B-117 norm, set up by the American Society for Testing and Materials. Tests run in a salt spray chamber show that hooks coated with stainless steel will have 3% surface rust, Duratin 8%, and Double Nickel 30% surface rust after a given number of hours. The results may vary somewhat, depending first of all on the thickness of the coating, but also on fishing conditions, water temperature, type of bait and pH value.Quality control at all stages of production is of major concern to the Mustad company. At the initial stage of the process, every batch of steel wire is physically and chemically tested in Mustad's laboratories. In addition, hooks are tested before and after tempering, after surface treatment and when being packed. Despite the high technological level of our manufacturing process, the most important contributors to quality assurance are still the people involved, both those involved in the manufacturing process and the customers. The feedback Mustad receives from fishermen is invaluable for the development of quality hooks and their quest for the perfect hook. With Mustad hooks you can expect a strong long lasting hook that boasts excellent performance, time after time. Fri, 10 Oct 2008 22:41:05 +0100 http://cas-yachts.com/aos/openeurl/page1/6833073/ http://cas-yachts.com/aos/openeurl/page1/6833073/ GROUPER O'Shaughnessy Stainless Steel Grouper Hook Unmatched StrengthOur unique three-stage computer controlled tempering process transforms the hook into a fine grained, ultrastrong microstructure. This increases strength up to 30 per cent compared to conventional tempering methods. However, it's not only strength that is important in this process; Mustad has strict quality controls over the brittleness and flexibility of their hooks as well. Mustad's superior technology allows us such control of the final outcome.Surface treatmentMustad hooks feature a wide range of colors and finishes, from black nickel and gold to bronze. The special coatings have been developed to suit the various types of fishing. E.g. Duratin is used for long lining hooks and lacquer for freshwater. Mustad also manufactures stainless-steel hooks in a limited selection. The challenge within this field is to increase the rust resistance of our products even more. Rust ResistanceExperienced fishermen will select their hooks to match the bait or to suit their method of fishing and local conditions. Some hooks are made for specific purposes and are thus available only in one finish, while other patterns come in a variety of coatings. Different coatings have different features and properties. This entails that the rust resistance of the hooks may vary. Mustad runs tests showing how the various coatings compare in this respect. These tests are carried out in accordance with the ASTM B-117 norm, set up by the American Society for Testing and Materials. Tests run in a salt spray chamber show that hooks coated with stainless steel will have 3% surface rust, Duratin 8%, and Double Nickel 30% surface rust after a given number of hours. The results may vary somewhat, depending first of all on the thickness of the coating, but also on fishing conditions, water temperature, type of bait and pH value.Quality control at all stages of production is of major concern to the Mustad company. At the initial stage of the process, every batch of steel wire is physically and chemically tested in Mustad's laboratories. In addition, hooks are tested before and after tempering, after surface treatment and when being packed. Despite the high technological level of our manufacturing process, the most important contributors to quality assurance are still the people involved, both those involved in the manufacturing process and the customers. The feedback Mustad receives from fishermen is invaluable for the development of quality hooks and their quest for the perfect hook. With Mustad hooks you can expect a strong long lasting hook that boasts excellent performance, time after time. Fri, 10 Oct 2008 22:41:05 +0100 http://cas-yachts.com/aos/openeurl/page1/6833074/ http://cas-yachts.com/aos/openeurl/page1/6833074/ GROUPER The baitwell pump that won't choke upDesigned for bait well or fishbox pumpout, this reliable pump features valves that won't choke on fishy remnants at the end of the day. Capacity is more than ample at 6.8 gallons per minute and it is self-priming to 10 feet. Installation is made easy by the pump's ports which rotate 360deg Includes fittings to accommodate 1" or 1 1/2" hose Fri, 10 Oct 2008 22:41:06 +0100 http://cas-yachts.com/aos/openeurl/page1/6833075/ http://cas-yachts.com/aos/openeurl/page1/6833075/ GROUPER O'Shaughnessy Stainless Steel Grouper 50 Pkg Unmatched StrengthOur unique three-stage computer controlled tempering process transforms the hook into a fine grained, ultrastrong microstructure. This increases strength up to 30 per cent compared to conventional tempering methods. However, it's not only strength that is important in this process; Mustad has strict quality controls over the brittleness and flexibility of their hooks as well. Mustad's superior technology allows us such control of the final outcome.Surface treatmentMustad hooks feature a wide range of colors and finishes, from black nickel and gold to bronze. The special coatings have been developed to suit the various types of fishing. E.g. Duratin is used for long lining hooks and lacquer for freshwater. Mustad also manufactures stainless-steel hooks in a limited selection. The challenge within this field is to increase the rust resistance of our products even more. Rust ResistanceExperienced fishermen will select their hooks to match the bait or to suit their method of fishing and local conditions. Some hooks are made for specific purposes and are thus available only in one finish, while other patterns come in a variety of coatings. Different coatings have different features and properties. This entails that the rust resistance of the hooks may vary. Mustad runs tests showing how the various coatings compare in this respect. These tests are carried out in accordance with the ASTM B-117 norm, set up by the American Society for Testing and Materials. Tests run in a salt spray chamber show that hooks coated with stainless steel will have 3% surface rust, Duratin 8%, and Double Nickel 30% surface rust after a given number of hours. The results may vary somewhat, depending first of all on the thickness of the coating, but also on fishing conditions, water temperature, type of bait and pH value.Quality control at all stages of production is of major concern to the Mustad company. At the initial stage of the process, every batch of steel wire is physically and chemically tested in Mustad's laboratories. In addition, hooks are tested before and after tempering, after surface treatment and when being packed. Despite the high technological level of our manufacturing process, the most important contributors to quality assurance are still the people involved, both those involved in the manufacturing process and the customers. The feedback Mustad receives from fishermen is invaluable for the development of quality hooks and their quest for the perfect hook. With Mustad hooks you can expect a strong long lasting hook that boasts excellent performance, time after time. Fri, 10 Oct 2008 22:41:06 +0100 http://cas-yachts.com/aos/openeurl/page1/6833076/ http://cas-yachts.com/aos/openeurl/page1/6833076/ GROUPER O'Shaughnessy SS Grouper Hook 8/0 - 50-Pkg. Unmatched StrengthOur unique three-stage computer controlled tempering process transforms the hook into a fine grained, ultrastrong microstructure. This increases strength up to 30 per cent compared to conventional tempering methods. However, it's not only strength that is important in this process; Mustad has strict quality controls over the brittleness and flexibility of their hooks as well. Mustad's superior technology allows us such control of the final outcome.Surface treatmentMustad hooks feature a wide range of colors and finishes, from black nickel and gold to bronze. The special coatings have been developed to suit the various types of fishing. E.g. Duratin is used for long lining hooks and lacquer for freshwater. Mustad also manufactures stainless-steel hooks in a limited selection. The challenge within this field is to increase the rust resistance of our products even more. Rust ResistanceExperienced fishermen will select their hooks to match the bait or to suit their method of fishing and local conditions. Some hooks are made for specific purposes and are thus available only in one finish, while other patterns come in a variety of coatings. Different coatings have different features and properties. This entails that the rust resistance of the hooks may vary. Mustad runs tests showing how the various coatings compare in this respect. These tests are carried out in accordance with the ASTM B-117 norm, set up by the American Society for Testing and Materials. Tests run in a salt spray chamber show that hooks coated with stainless steel will have 3% surface rust, Duratin 8%, and Double Nickel 30% surface rust after a given number of hours. The results may vary somewhat, depending first of all on the thickness of the coating, but also on fishing conditions, water temperature, type of bait and pH value.Quality control at all stages of production is of major concern to the Mustad company. At the initial stage of the process, every batch of steel wire is physically and chemically tested in Mustad's laboratories. In addition, hooks are tested before and after tempering, after surface treatment and when being packed. Despite the high technological level of our manufacturing process, the most important contributors to quality assurance are still the people involved, both those involved in the manufacturing process and the customers. The feedback Mustad receives from fishermen is invaluable for the development of quality hooks and their quest for the perfect hook. With Mustad hooks you can expect a strong long lasting hook that boasts excellent performance, time after time. Fri, 10 Oct 2008 22:41:06 +0100 http://cas-yachts.com/aos/openeurl/page1/6833077/ http://cas-yachts.com/aos/openeurl/page1/6833077/ GROUPER O'Shaughnessy SS Grouper Hook 7/0 - 50-Pkg. Unmatched StrengthOur unique three-stage computer controlled tempering process transforms the hook into a fine grained, ultrastrong microstructure. This increases strength up to 30 per cent compared to conventional tempering methods. However, it's not only strength that is important in this process; Mustad has strict quality controls over the brittleness and flexibility of their hooks as well. Mustad's superior technology allows us such control of the final outcome.Surface treatmentMustad hooks feature a wide range of colors and finishes, from black nickel and gold to bronze. The special coatings have been developed to suit the various types of fishing. E.g. Duratin is used for long lining hooks and lacquer for freshwater. Mustad also manufactures stainless-steel hooks in a limited selection. The challenge within this field is to increase the rust resistance of our products even more. Rust ResistanceExperienced fishermen will select their hooks to match the bait or to suit their method of fishing and local conditions. Some hooks are made for specific purposes and are thus available only in one finish, while other patterns come in a variety of coatings. Different coatings have different features and properties. This entails that the rust resistance of the hooks may vary. Mustad runs tests showing how the various coatings compare in this respect. These tests are carried out in accordance with the ASTM B-117 norm, set up by the American Society for Testing and Materials. Tests run in a salt spray chamber show that hooks coated with stainless steel will have 3% surface rust, Duratin 8%, and Double Nickel 30% surface rust after a given number of hours. The results may vary somewhat, depending first of all on the thickness of the coating, but also on fishing conditions, water temperature, type of bait and pH value.Quality control at all stages of production is of major concern to the Mustad company. At the initial stage of the process, every batch of steel wire is physically and chemically tested in Mustad's laboratories. In addition, hooks are tested before and after tempering, after surface treatment and when being packed. Despite the high technological level of our manufacturing process, the most important contributors to quality assurance are still the people involved, both those involved in the manufacturing process and the customers. The feedback Mustad receives from fishermen is invaluable for the development of quality hooks and their quest for the perfect hook. With Mustad hooks you can expect a strong long lasting hook that boasts excellent performance, time after time. Fri, 10 Oct 2008 22:41:07 +0100 http://cas-yachts.com/aos/openeurl/page1/6833078/ http://cas-yachts.com/aos/openeurl/page1/6833078/ GROUPER Saltwater Fish Chart How To Catch "EM" Saltwater Chart #1Barracuda, Permit, Tarpon, Snook, Cobia, Pompano, Cubera Snapper, Jewfish, Yellowtail Snapper, Bonefish, Kingfish, Mutton Snapper, Blue Marlin, White -Marlin, Wahoo, Yellowfin Tuna, Warsaw Grouper, Nassau Grouper, Mako Shark, Swordfish, Trippletail, Dolphin, Sailfish.Saltwater Identification Chart # 5Contains: 64 Saltwater Fish of the Atlantic Ocean, Bahamas, Caribbean Sea, and the Gulf of Mexico. Plus Common & Latin Name, Average Weights, and Food Quality, 64 Beautiful Color Illustrations.How to Catch "EM" Saltwater Chart #6 Red Toro Snapper, Lane Snapper, Red Snapper, Red Porgy, Sheepshead, Mangrove Snapper, Vermillon Snapper, Scup Porgy, Hodfish, Yellowtail Snapper, Silk Snapper, Mutton Snapper, GROUPER'S: Yellowfin Grouper, Graysby Grouper, Red Hind, Scamp Grouper, Speckled Hind, Nassau Grouper, Warsaw Grouper, Gag Grouper, Black Grouper, Rock Grouper. Fri, 10 Oct 2008 22:41:07 +0100 http://cas-yachts.com/aos/openeurl/page1/6833079/ http://cas-yachts.com/aos/openeurl/page1/6833079/ GROUPER Cairns Swimmer 7'' Great offshore bait for ''toothy'' fish, also works well on a downrigger for grouper. Fri, 10 Oct 2008 22:41:07 +0100