Garboard Drain plug

Replacement Garboard Drain Plug This is a direct replacement for most garboard drain plugs. Includes two 1/2'' brass garboard drain plugs. Sold in pairs.
9.99 USD

Solid Brass Garboard Drain Plug Assembly - Solid Brass Tired of dealing with those rubber drain plugs that seem to rot every year? This is a great way to put a stop to that. This 2'' diameter brass garboard assembly and 1/2'' garboard screw means that this drain plug will be corrosion resistant for years of use.
12.99 USD

Allows quick drainage of boat when hauled out. 1/2" NPT tapered pipe threads ensure a watertight fit. Cast brass construction Flange diameter is 2" and is drilled and countersunk for #8 screws Neck depth: 3/8"
14.99 USD

Cast bronze construction. Twist plug has 3/4'' NPT tapered pipe threads. Flange has a 1 1/4'' threaded neck, which fits hulls to 3/4'' thick Flange diameter is 2 3/8''
72.99 USD

All styles have a nut-type plug with 1/2" NPT threads for a watertight fit. All are cast bronze for corrosion resistance, with a 2" OD flange predrilled and countersunk for #8 screws. Some styles have a stainless pin for easier plug removal by hand Maximum hull thickness for styles with brass backing plate is 7/16
22.99 USD

All styles have a nut-type plug with 1/2" NPT threads for a watertight fit. All are cast bronze for corrosion resistance, with a 2" OD flange predrilled and countersunk for #8 screws. Some styles have a stainless pin for easier plug removal by hand Maximum hull thickness for styles with brass backing plate is 7/16
23.99 USD

All styles have a nut-type plug with 1/2" NPT threads for a watertight fit. All are cast bronze for corrosion resistance, with a 2" OD flange predrilled and countersunk for #8 screws. Some styles have a stainless pin for easier plug removal by hand Maximum hull thickness for styles with brass backing plate is 7/16
35.99 USD

All styles have a nut-type plug with 1/2" NPT threads for a watertight fit. All are cast bronze for corrosion resistance, with a 2" OD flange predrilled and countersunk for #8 screws. Some styles have a stainless pin for easier plug removal by hand Maximum hull thickness for styles with brass backing plate is 7/16
47.99 USD

Prop And Garboard Drain Wrench High impact plastic prop wrench works on both 1 1/6" prop nut sizes and hex drain plugs. Lightweight, will not corrode or rust.
12.99 USD

Allows quick drainage of boat when hauled out. 1/2" NPT tapered pipe threads ensure a watertight fit. Cast brass construction Flange diameter is 2" and is drilled and countersunk for #8 screws Neck depth: 3/8"
8.79 USD