http://cas-yachts.com/aos/Lewmar_Rope_clutches/ cas-yachts.com/aos results for Lewmar Rope clutches. Compare products and prices in many shops at once. 1056 1 10 Mon, 01 Dec 2008 18:38:06 +0100 Mon, 01 Dec 2008 18:38:06 +0100 en info@cas-yachts.com AOS RSS Generator (http://automaticonlineshop.com) http://cas-yachts.com/aos/openeurl/page1/8381623/ http://cas-yachts.com/aos/openeurl/page1/8381623/ Lewmar Rope clutches A combination of advanced technology and innovative features has made Lewmar's high performance Ocean Series range the world's most popular winches. Lewmar features fewer moving parts for fewer problems and a massive all-bronze one-piece center stem for support and exceptional strength. Use chrome on bronze drums for all rigging materials. Use aluminum drums for lines. Easy servicing with strip-from-the-top construction Unique grip pattern on drum makes light work of rope handling Stainless steel main shafts and gear spindles for exceptional strength Bronze gear trains deliver smooth power with minimal loss Rigid, one piece nylon cage holds snap-in stainless steel bearings Integral grease pocket for permanent lubrication and free running bearings Pawls are spring-loaded cams which engage precisely, with the ratchet track in the gear train, to stop the drum unwinding 3 year warranty against defects in parts and workmanship Lewmar# Gear Ratio Power Ratio Drum Base Height 6 1:1 6.8:1 2 5/16" 3 11/16" 3 1/4" 7 1:1 7.9:1 2 9/16" 4 1/4" 4" 8 1:1 7.9:1 2 9/16" 4 1/4" 4 1/16" 16 1:1 / 2:1 7.9:1 / 16:1 2 5/8" 4 3/4" 4 7/16" 30 1:1 / 4.3:1 7:1 / 30:1 2 5/16" 5 3/4" 5 1/16" 40 1:1 / 6:1 6.7:1 / 40:1 2 5/16" 5 13/16" 5 9/16" 43 2.7:1 / 7.3:1 15.6:1 / 43:1 3 3/8" 6 1/2" 6" Mon, 01 Dec 2008 18:38:06 +0100 http://cas-yachts.com/aos/openeurl/page1/8381624/ http://cas-yachts.com/aos/openeurl/page1/8381624/ Lewmar Rope clutches A combination of advanced technology and innovative features has made Lewmar's high performance Ocean Series range the world's most popular winches. Lewmar features fewer moving parts for fewer problems and a massive all-bronze one-piece center stem for support and exceptional strength. Use chrome on bronze drums for all rigging materials. Use aluminum drums for lines. Easy servicing with strip-from-the-top construction Unique grip pattern on drum makes light work of rope handling Stainless steel main shafts and gear spindles for exceptional strength Bronze gear trains deliver smooth power with minimal loss Rigid, one piece nylon cage holds snap-in stainless steel bearings Integral grease pocket for permanent lubrication and free running bearings Pawls are spring-loaded cams which engage precisely, with the ratchet track in the gear train, to stop the drum unwinding 3 year warranty against defects in parts and workmanship Lewmar# Gear Ratio Power Ratio Drum Base Height 6 1:1 6.8:1 2 5/16" 3 11/16" 3 1/4" 7 1:1 7.9:1 2 9/16" 4 1/4" 4" 8 1:1 7.9:1 2 9/16" 4 1/4" 4 1/16" 16 1:1 / 2:1 7.9:1 / 16:1 2 5/8" 4 3/4" 4 7/16" 30 1:1 / 4.3:1 7:1 / 30:1 2 5/16" 5 3/4" 5 1/16" 40 1:1 / 6:1 6.7:1 / 40:1 2 5/16" 5 13/16" 5 9/16" 43 2.7:1 / 7.3:1 15.6:1 / 43:1 3 3/8" 6 1/2" 6" Mon, 01 Dec 2008 18:38:06 +0100 http://cas-yachts.com/aos/openeurl/page1/8381625/ http://cas-yachts.com/aos/openeurl/page1/8381625/ Lewmar Rope clutches Allows controlled release under loadThe award winning D2 Rope Clutch, built for big boat applications, allows for an easy and controlled release even at full holding power. Instead of just jamming the rope, the D2 clutch's Domino Cluster mechanism has a longer holding pattern for better grip and less rope wear. Full holding power is retained regardless of line type used, holding equally well on conventional double braids or Spectra, Dyneema, Vectran, and other modern lines. Fits line sizes from 5/16" (8mm) to 9/16" (14mm). Due to its variable geometry handle and the grip pattern of its dominoes, the D2 provides easy, controlled releases under load without fraying your lines. Application: High load applications on boats to 55', low load and control lines on larger boats Safe Working Load: 2650lb. (1200kg) Grip: Domino Cluster Height: 3.4"(88mm) Length: 6.14" (156mm) Width: Single 1.5"(38mm); Double 2.7" (68.5mm); Triple 3.9" (99mm) Hole Spacing: 4.2"L x 1.2"W (107mm x 70mm) Line Entry: 1.04" (26mm) Line entry and exit angle should not exceed 15 from center line. Line Exit: 1.3" (32mm) Warranty: Three years Mon, 01 Dec 2008 18:38:06 +0100 http://cas-yachts.com/aos/openeurl/page1/8381626/ http://cas-yachts.com/aos/openeurl/page1/8381626/ Lewmar Rope clutches Allows controlled release under loadThe award winning D2 Rope Clutch, built for big boat applications, allows for an easy and controlled release even at full holding power. Instead of just jamming the rope, the D2 clutch's Domino Cluster mechanism has a longer holding pattern for better grip and less rope wear. Full holding power is retained regardless of line type used, holding equally well on conventional double braids or Spectra, Dyneema, Vectran, and other modern lines. Fits line sizes from 5/16" (8mm) to 9/16" (14mm). Due to its variable geometry handle and the grip pattern of its dominoes, the D2 provides easy, controlled releases under load without fraying your lines. Application: High load applications on boats to 55', low load and control lines on larger boats Safe Working Load: 2650lb. (1200kg) Grip: Domino Cluster Height: 3.4"(88mm) Length: 6.14" (156mm) Width: Single 1.5"(38mm); Double 2.7" (68.5mm); Triple 3.9" (99mm) Hole Spacing: 4.2"L x 1.2"W (107mm x 70mm) Line Entry: 1.04" (26mm) Line entry and exit angle should not exceed 15 from center line. Line Exit: 1.3" (32mm) Warranty: Three years Mon, 01 Dec 2008 18:38:06 +0100 http://cas-yachts.com/aos/openeurl/page1/8381627/ http://cas-yachts.com/aos/openeurl/page1/8381627/ Lewmar Rope clutches Allows controlled release under loadThe award winning D2 Rope Clutch, built for big boat applications, allows for an easy and controlled release even at full holding power. Instead of just jamming the rope, the D2 clutch's Domino Cluster mechanism has a longer holding pattern for better grip and less rope wear. Full holding power is retained regardless of line type used, holding equally well on conventional double braids or Spectra, Dyneema, Vectran, and other modern lines. Fits line sizes from 5/16" (8mm) to 9/16" (14mm). Due to its variable geometry handle and the grip pattern of its dominoes, the D2 provides easy, controlled releases under load without fraying your lines. Application: High load applications on boats to 55', low load and control lines on larger boats Safe Working Load: 2650lb. (1200kg) Grip: Domino Cluster Height: 3.4"(88mm) Length: 6.14" (156mm) Width: Single 1.5"(38mm); Double 2.7" (68.5mm); Triple 3.9" (99mm) Hole Spacing: 4.2"L x 1.2"W (107mm x 70mm) Line Entry: 1.04" (26mm) Line entry and exit angle should not exceed 15 from center line. Line Exit: 1.3" (32mm) Warranty: Three years Mon, 01 Dec 2008 18:38:06 +0100 http://cas-yachts.com/aos/openeurl/page1/8381628/ http://cas-yachts.com/aos/openeurl/page1/8381628/ Lewmar Rope clutches Allows the aluminum framed screen included with Lewmar Trim and Screen Kits to be hinged for easier access to the hatch. Fits models 024_720_003_010 Mon, 01 Dec 2008 18:38:06 +0100 http://cas-yachts.com/aos/openeurl/page1/8381629/ http://cas-yachts.com/aos/openeurl/page1/8381629/ Lewmar Rope clutches Allows controlled release under loadThe award winning D2 Rope Clutch, built for big boat applications, allows for an easy and controlled release even at full holding power. Instead of just jamming the rope, the D2 clutch's Domino Cluster mechanism has a longer holding pattern for better grip and less rope wear. Full holding power is retained regardless of line type used, holding equally well on conventional double braids or Spectra, Dyneema, Vectran, and other modern lines. Fits line sizes from 5/16" (8mm) to 9/16" (14mm). Due to its variable geometry handle and the grip pattern of its dominoes, the D2 provides easy, controlled releases under load without fraying your lines. Application: High load applications on boats to 55', low load and control lines on larger boats Safe Working Load: 2650lb. (1200kg) Grip: Domino Cluster Height: 3.4"(88mm) Length: 6.14" (156mm) Width: Single 1.5"(38mm); Double 2.7" (68.5mm); Triple 3.9" (99mm) Hole Spacing: 4.2"L x 1.2"W (107mm x 70mm) Line Entry: 1.04" (26mm) Line entry and exit angle should not exceed 15 from center line. Line Exit: 1.3" (32mm) Warranty: Three years Mon, 01 Dec 2008 18:38:06 +0100 http://cas-yachts.com/aos/openeurl/page1/8381630/ http://cas-yachts.com/aos/openeurl/page1/8381630/ Lewmar Rope clutches Allows controlled release under loadThe award winning D2 Rope Clutch, built for big boat applications, allows for an easy and controlled release even at full holding power. Instead of just jamming the rope, the D2 clutch's Domino Cluster mechanism has a longer holding pattern for better grip and less rope wear. Full holding power is retained regardless of line type used, holding equally well on conventional double braids or Spectra, Dyneema, Vectran, and other modern lines. Fits line sizes from 5/16" (8mm) to 9/16" (14mm). Due to its variable geometry handle and the grip pattern of its dominoes, the D2 provides easy, controlled releases under load without fraying your lines. Application: High load applications on boats to 55', low load and control lines on larger boats Safe Working Load: 2650lb. (1200kg) Grip: Domino Cluster Height: 3.4"(88mm) Length: 6.14" (156mm) Width: Single 1.5"(38mm); Double 2.7" (68.5mm); Triple 3.9" (99mm) Hole Spacing: 4.2"L x 1.2"W (107mm x 70mm) Line Entry: 1.04" (26mm) Line entry and exit angle should not exceed 15 from center line. Line Exit: 1.3" (32mm) Warranty: Three years Mon, 01 Dec 2008 18:38:06 +0100 http://cas-yachts.com/aos/openeurl/page1/8381631/ http://cas-yachts.com/aos/openeurl/page1/8381631/ Lewmar Rope clutches Allows controlled release under loadThe award winning D2 Rope Clutch, built for big boat applications, allows for an easy and controlled release even at full holding power. Instead of just jamming the rope, the D2 clutch's Domino Cluster mechanism has a longer holding pattern for better grip and less rope wear. Full holding power is retained regardless of line type used, holding equally well on conventional double braids or Spectra, Dyneema, Vectran, and other modern lines. Fits line sizes from 5/16" (8mm) to 9/16" (14mm). Due to its variable geometry handle and the grip pattern of its dominoes, the D2 provides easy, controlled releases under load without fraying your lines. Application: High load applications on boats to 55', low load and control lines on larger boats Safe Working Load: 2650lb. (1200kg) Grip: Domino Cluster Height: 3.4"(88mm) Length: 6.14" (156mm) Width: Single 1.5"(38mm); Double 2.7" (68.5mm); Triple 3.9" (99mm) Hole Spacing: 4.2"L x 1.2"W (107mm x 70mm) Line Entry: 1.04" (26mm) Line entry and exit angle should not exceed 15 from center line. Line Exit: 1.3" (32mm) Warranty: Three years Mon, 01 Dec 2008 18:38:06 +0100 http://cas-yachts.com/aos/openeurl/page1/8381632/ http://cas-yachts.com/aos/openeurl/page1/8381632/ Lewmar Rope clutches Allows controlled release under loadThe award winning D2 Rope Clutch, built for big boat applications, allows for an easy and controlled release even at full holding power. Instead of just jamming the rope, the D2 clutch's Domino Cluster mechanism has a longer holding pattern for better grip and less rope wear. Full holding power is retained regardless of line type used, holding equally well on conventional double braids or Spectra, Dyneema, Vectran, and other modern lines. Fits line sizes from 5/16" (8mm) to 9/16" (14mm). Due to its variable geometry handle and the grip pattern of its dominoes, the D2 provides easy, controlled releases under load without fraying your lines. Application: High load applications on boats to 55', low load and control lines on larger boats Safe Working Load: 2650lb. (1200kg) Grip: Domino Cluster Height: 3.4"(88mm) Length: 6.14" (156mm) Width: Single 1.5"(38mm); Double 2.7" (68.5mm); Triple 3.9" (99mm) Hole Spacing: 4.2"L x 1.2"W (107mm x 70mm) Line Entry: 1.04" (26mm) Line entry and exit angle should not exceed 15 from center line. Line Exit: 1.3" (32mm) Warranty: Three years Mon, 01 Dec 2008 18:38:06 +0100