RUNNING ENGINE FLUSH PORT

White graphics on black background. Universal styling blends into any dash or engine compartment. Track engine operating hours for routine maintenance Display up to 10,000 hours
45.99 USD

This unit bolts to the engine flywheel much like a pressure plate or clutch cover in an automotive application. Its construction includes an aluminum case, rubber insulator and aluminum hub. It fails due to the engine being out of alignment with the gimbal housing or with lack of lubricant. The aluminum splines should be greased every year. The steel yoke assembly which is inserted into the aluminum hub causes aluminum to strip without lubrication. Call West Advisor 1-800-262-8464 to get the right engine part.
177.99 USD

TFXtreme Engine Specific Connection Kit Kits contain all items needed to convert any TFXtreme 3300 series kit to your outboard.
12.99 USD

These elegant ceramic heads offer homelike appearance and performance with the convenience of electronic touchpad operation. Each comes equipped with a full-size, residential-style seat and features a reverse water trap in the bowl to eliminate macerator odors. The touchpad features three settings: "Low" for liquid-only flush, "Normal" for standard flushing and "Empty" to clear water from bowl while underway Type: Electric Draw: 10-13A @ 12V DC (25A peak) Material: White china Port Sizes: 1/2" inlet; 1 1/2" discharge Warranty: One year
1399.00 USD

These elegant ceramic heads offer homelike appearance and performance with the convenience of electronic touchpad operation. Each comes equipped with a full-size, residential-style seat and features a reverse water trap in the bowl to eliminate macerator odors. The touchpad features three settings: "Low" for liquid-only flush, "Normal" for standard flushing and "Empty" to clear water from bowl while underway Type: Electric Draw: 10-13A @ 12V DC (25A peak) Material: White china Port Sizes: 1/2" inlet; 1 1/2" discharge Warranty: One year
1399.00 USD

Protects exterior engine surfaces from rust and corrosion during storage. 12oz aerosol can
5.66 USD

Protects exterior engine surfaces from rust and corrosion during storage. 12oz aerosol can
5.66 USD

Port Id Pl-71 Plastic ID plates are molded in black plastic with white letters abs bevel.
1.39 USD

Port Id Pl-71 Plastic ID plates are molded in black plastic with white letters abs bevel.
1.39 USD

An easy way to reduce sound and unwanted vibration aboardFeaturing easy application and excellent adhesion to a variety of surfaces, this high-performance viscoelastic coating is an easy way to reduce unwanted noise and vibration aboard. Use it on or around virtually any source of unwanted noise or vibration, including the hull, stringers, engine beds, bulkheads, ceilings, hatches, engine boxes and bow thrusters. Can be used on all surfaces, including fiberglass, aluminum, and steel. Water-based, non-toxic and VOC free. USCG approved. Base Formulation: Water-based acrylic Recommended Application Method: Brush, roller, spray Number of Coats Recommended: Minimum 4 coats @ 10mil./ coat (40mil. minimum thickness required at full cure) Drying Time: To touch: 1hr.; overcoating: 1hr. Drying Time to Full Cure: 5-7 days (required for full noise and vibration attenuation) Coverage: 40sq. ft./gal. @ 40mil. (10 mil/coat) Thinner: Not recommended Color: Off-white Clean Up: Soap and water
189.99 USD