VOLVO PENTA OUTdrive paint

Very good as a primer for aluminumTwo-part strontium-chromate primer, mostly used to prime aluminum prior to application of antifouling paint. Can also be used on aluminum as a primer for Easypoxy or ZSpar enamels. Resin and catalyst comprise a two quart kit. Primary Usage: Aluminum hulls, outboard and outdrive lower units Formulation: Two-part epoxy anti-corrosive aluminum primer Drying Time: Pot life: 16-20 hrs.; to recoat: 1-8 hrs. Number of Coats Recommended: Two Thinner: Use Pettit 120 for clean-up Coverage: 106 sq.ft./kit Color: Bright yellow
57.99 USD

Phantom Black Paint For all Mercury outboards and MCM/MIE engines and drives. 12 oz. spray can. 12 fl. oz.Part # :92-802878Q 1Sh. Wt. 1 lb.
13.99 USD

Hookit Paint & Varnish Remover Disc The 3M Hookit Paint & Varnish Remover Disc aataches to a 3M Hookit Backup Pad. The disc is for use on flat projects requiring fast removal of surface paint and varnish from wood, metal, and plastic. Paont & Varnish Disc Sh. Wt. 1 lb.
6.59 USD

Plastic Putty Knife/Paint Scrapper Made of super strength solvent proof plastic "Celon", these putty knives will hold up to the harsh chemicals and solvents associated with the application of resin and epoxies. They also work well for scraping paint.
0.99 USD

Paint Strainer f/ qts and gal Paper cone with cloth strainer. Perfect for quarts or gallons.
0.60 USD

Protects all types of non-aluminum underwater metals Formulated to protect electronics transducers from underwater fouling in both fresh and salt water. For use only on bare metals such as steel, stainless steel, cast iron, copper, bronze, galvanized steel and lead. It forms an excellent adhesive bond to underwater metals and running gear and inhibits corrosion. Because of its smooth hard surface air will self-clean in service, and can be used above or below the waterline. Do not overcoat with antifouling paint. Spray can for easy application. 16oz. Dark gray. Type: Modified epoxy Recommended Usage: Transducers and underwater metals Biocide: Zinc Additives: None Number of Coats Recommended: Two full coats Coverage: 10 sq.ft./can Drying Time: One hour
27.99 USD

Protects all types of non-aluminum underwater metals Formulated to protect electronics transducers from underwater fouling in both fresh and salt water. For use only on bare metals such as steel, stainless steel, cast iron, copper, bronze, galvanized steel and lead. It forms an excellent adhesive bond to underwater metals and running gear and inhibits corrosion. Because of its smooth hard surface air will self-clean in service, and can be used above or below the waterline. Do not overcoat with antifouling paint. Spray can for easy application. 16oz. Dark gray. Type: Modified epoxy Recommended Usage: Transducers and underwater metals Biocide: Zinc Additives: None Number of Coats Recommended: Two full coats Coverage: 10 sq.ft./can Drying Time: One hour
27.99 USD

Inflatable Boat Bottom Paint Flexible water-based vinyl antifouling coating contains 26.37% cuprous oxide for maximum protection against barnacles and other marine growth in fresh and salt water. Use on Hypalon, PVC, rubber, and fiberglass or wooden dingies. Once cured, inflatables can be deflated and rolled without cracking the coating. Apply with brush or roller, and clean up with water. One quart is enough for two coats on an 8-10' boat. Black.
59.99 USD

The Beneteau prop nut anode provides reliable corrosion protection for valuable outdrive, outboards and propellers.
26.99 USD

The Beneteau prop nut anode provides reliable corrosion protection for valuable outdrive, outboards and propellers.
11.33 USD