engine oil drain pump

Easy-install pump drains shower water fastThis 3.7gpm, self-priming waste pump features run-dry capability and a head that rotates to any of three positions-with ports that rotate a full 360 to make installation easy. It also features a dependable diaphragm design to easily handle the demands of shower drain installations.
234.99 USD

These inlet hoses and Valve Assemblies are used in multiple engine or engine/gear box applications. For use with the Qwik-Drain Oil Removal System. Intake Hose Assemblies available in lengths from 3-1/2' to 7'. 2-Way or 3-Way Valve Assemblies
28.99 USD

TCW3 Engine Oil for high-performance 2-cycle Ashless additives prevent pre-ignition and corrosion Meets or exceeds manufacturer s specifications
38.49 USD

The self-priming drill pump chucks into a standard 1/4" drill motor and pumps up to 3 1/2gpm. Kit includes all items needed for draining engine oil through the dipstick tube Includes 3' of 1/2" hose, probe adapter and 40"L x 1/4"dia. dipstick probe
39.99 USD

Keeps oil and water out of your lower unit. Mechanics recommend changing the oil plug gaskets and O-rings when changing lower unit oil
7.99 USD

Keeps oil and water out of your lower unit. Mechanics recommend changing the oil plug gaskets and O-rings when changing lower unit oil
7.77 USD

The fast and easy way to change your oilThe simple way to change your oil. The system includes a heavy-duty SHURflo diaphragm pump with 8' power cord and battery clips. Includes a 13 quart capacity oil storage container, dipstick probe and all necessary fittings to extract oil from your engine. 20.3"H x 14.7Dia 13qt storage bucket One year limited warranty
159.99 USD

Pedestal-Mount Engine Cooling Pump Flow rate: Nominal 40 Litres/min (8.9 gallons/min) at 1500rpm Self-priming from dry up to 2.4m (7.8ft) Features: Constructed from marine quality bronze and stainless steel for ruggedness and reliability Easy to service and maintain Inexpensive to buy and operate Will tolerate abrasive wear (this may affect performance - seek advice from your distributer) Handles hard and soft solids without clogging Can pump in either direction Will not airlock Specifications: Body: Bronze Impeller: Neoprene or Nitrile Shaft: Stainless Steel Shaft: Seal Lip Seal, Nitrile Bearings: Sealed Ball Bearings Port Type: 1/2" NPT Weight: 4-1/4 lb 2 kg
289.99 USD

Engine storage protectant, mists a fine fog of oil for thourough coverage
7.99 USD

Oil seal replaces OEM #18-0570 for Yamaha engine
6.29 USD