air pump 12v ignition protected

Groco Sweettank 12V The SweetTank concept has been developed by GROCO to stop odors in boat and RV holding tanks without the use of chemicals or filters. While both aerobic and anaerobic bacteria co-exist naturally in waste holding tanks, it is the anaerobic bacteria that produce undesirable odors. By inducing a constant flow of air into the holding tank through a submerged aeration tube, SweetTank produces an oxygen-rich environment in which the anaerobic bacteria cannot thrive, thus eliminating unpleasant odors! The SweetTank system is a compact module that operates continuously to deliver air to the holding tank using less than 3-watts of DC power.Sh. Wt. 2 lbs.
259.99 USD

Never buy another refill! This air horn produces more than 50 115db sound blasts per air charge. Includes pump Environmentally friendly, emits air instead of other propellants Bike or service station pump refillable Meets USCG sound-producing regulations
31.99 USD

Polarized double contacts rated for 15A @ 12V. Includes waterproof cover for base when plug is removed Not ignition protected 1 5/8"D x 1 3/16"H
19.99 USD

Polarized double contacts rated for 15A @ 12V. Includes waterproof cover for base when plug is removed Not ignition protected 1 5/8"D x 1 3/16"H
44.99 USD

Polarized double contacts rated for 15A @ 12V. Includes waterproof cover for base when plug is removed Not ignition protected 1 5/8"D x 1 3/16"H
17.99 USD

Service kits, joker valves, 12v converter kits and other spare Jabsco head parts are listed here. The converter kit converts all Jabsco and Sealand 751, Brydon Boy and RM-69 manual models to electric operation.
249.99 USD

An excellent choice for wet bars and other single fixture needs, this low-flo pump features a five chamber, ultra-quiet, sealed design. It is self priming and can run dry without damage. Ignition and thermally protected. Includes fittings. gpm: 1.0 Switch Type: Sealed 30psi pressure switch Self-Prime: 6' Material: Polypropylene body and baseplate Port Sizes: 1/2" male NPS Dimensions: 3.2"H x 4.5"W x 6.4"L Draw: 3A @ 12V DC Warranty: Three years
59.99 USD

Self-priming pump can be located above the fluid source and can lift it up to 4'Bronze pump head resists corrosion, and bronze body features a reusable O-ring-type end-cover seal. Complies with USCG 183.410 and ISO 8846 (ignition protection). Application: Bilge pump, livewell circulation, washdown, general pumping requirements GPM: 6.3 (fwd), 7.8 (reverse) Self-Prime: 4 ft. dry suction (self-priming) lift, 20 ft. lift when primed Material: Bronze body, neoprene impeller Port Sizes: 1/2" NPT female , with adapters for 3/4" garden hose and 1" hose barbs Dimensions: 3 3/8"H x 4 3/4"W x 6 3/8"L (7 1/8"L reversible) Draw: 6.8-9.0A @ 12V DC Warranty: One Year
319.99 USD

Self-priming pump can be located above the fluid source and can lift it up to 4'Bronze pump head resists corrosion, and bronze body features a reusable O-ring-type end-cover seal. Complies with USCG 183.410 and ISO 8846 (ignition protection). Application: Bilge pump, livewell circulation, washdown, general pumping requirements GPM: 6.3 (fwd), 7.8 (reverse) Self-Prime: 4 ft. dry suction (self-priming) lift, 20 ft. lift when primed Material: Bronze body, neoprene impeller Port Sizes: 1/2" NPT female , with adapters for 3/4" garden hose and 1" hose barbs Dimensions: 3 3/8"H x 4 3/4"W x 6 3/8"L (7 1/8"L reversible) Draw: 6.8-9.0A @ 12V DC Warranty: One Year
177.99 USD

Tank Monitor 12V The Tank Monitor provides convenient, reliable, maintenance-free monitoring of one to four fresh, gray and waste water tanks. All components are mounted outside of the tanks for dependable operation, eliminating the need for special tank fittings and the inevitable maintenance of internally mounted tank sensors. The tank monitor has no moving parts. The indicator panel clearly displays a tank's contents (or reserve) by selecting the tank on the touch pad. The tank's content is displayed at quarter tank intervals (i.e. EMPTY, 1/4, 1/2, 3/4 and FULL) with easy to understand international symbol labels (which are provided). The Indicator Panel is rugged, flush mounted and has no protruding parts. The tank module senses the contents of the tank and sends a signal to the indicator panel. The electronic components are completely encapsulated, protecting them from the harshest environments. 12V. For use on non-conductive tanks (polyethylene, fiberglass, etc.). NOT FOR USE ON FUEL TANKS.Benefits All parts are mounted outside of the tanks - eliminates need for special tank fittings Reliable electronic design protected for the marine environment Can be used with any polyethylene or fiberglass fresh, gray and waste water tanks Easy to use No maintenance required Gold-plated connectors ensure consistent and trouble free performance Simple installation Low power consumption No internal probes or floats Flush-mounted indicator panel has a smooth surface (no protruding switches or gauge) Each unit is assembled by hand, individually tested and backed by Raritan's one-year Limited Warranty and legendary technical support
344.99 USD