air pump 12v ignition protected UL

Blast the grimiest decks clean with one of these durable freshwater/saltwater pumps. Positive-displacement three/four chamber diaphragm design is self-priming up to 6' and can run dry without damage. Feature sealed shutoff switches factory set at 45 PSI and ignition protection. Include 3/4" and 5/8" garden hose adapters. Pro Blaster features higher capacity and a seamless motor shell for enhanced protection in saltwater environments. Suitable for mounting in wet locations. Include fittings and Blaster spray nozzle. Switch Type: Sealed 45 psi pressure switch Self-Prime: 6' Material: Polypropylene body and nylon base plate Port Sizes: 1/2" NPS male Dimensions: 5.4"H x 5.3"W x 7.2"L Draw: 9A @ 12V DC Warranty: One year
157.99 USD

Blast the grimiest decks clean with one of these durable freshwater/saltwater pumps. Positive-displacement three/four chamber diaphragm design is self-priming up to 6' and can run dry without damage. Feature sealed shutoff switches factory set at 45 PSI and ignition protection. Include 3/4" and 5/8" garden hose adapters. Pro Blaster features higher capacity and a seamless motor shell for enhanced protection in saltwater environments. Suitable for mounting in wet locations. Include fittings and Blaster spray nozzle. Switch Type: Sealed 45 psi pressure switch Self-Prime: 6' Material: Polypropylene body and nylon base plate Port Sizes: 1/2" NPS male Dimensions: 5.4"H x 5.3"W x 7.2"L Draw: 9A @ 12V DC Warranty: One year
129.99 USD

110V AC Flexible Impeller Pump Similar to Water Puppy DC pumps, but for use with shore power or AC power from your genset. Self-priming and portable. Accepts optional vacuum switch to shut off the pump automatically if unattended preventing dry running. Removable end cover enables easy impeller service Includes neoprene impeller and grounded power cord Not ignition protected do not use when flammable vapors are present 26 Gpm 1" NPT Weight 35.5lb.
669.00 USD

110V AC Flexible Impeller Pump Similar to Water Puppy DC pumps, but for use with shore power or AC power from your genset. Self-priming and portable. Accepts optional vacuum switch to shut off the pump automatically if unattended preventing dry running. Removable end cover enables easy impeller service Includes neoprene impeller and grounded power cord Not ignition protected do not use when flammable vapors are present 9.5 Gpm 1/2" Port NPT garden hose Weight 22lb.
599.00 USD

120 Volt Air Pump Now that you've picked out the perfect tube, don't to get all the other items you need to enjoy it! Nothing is worse than an under inflated tube, nothing is more dangerous than a worn out tow rope, and nothing is more frustrating than not having enough room on the boat. Airhead tube accessories will help you solve all these problems and help keep you safer on the water.No more soft inflatables! This canister pump fills tubes and towables rock hard for optimum performance. Includes fittings for all your inflatable gear. 10' cord. Pumps 300 liters per minute.
27.99 USD

This continuous-duty solenoid features plated steel housing with copper contacts and terminals for maximum efficiency. Normally open contacts. Its large contact terminals are 5/16"-24 thread, and its bracket mounting holes are 5/16" x 19/32", 2-13/64" on centers One circuit: Off-on Continuous Rating: 12V, 65 amps Intermittent Rating: 750 amps make and 100 amps break, 10 sec on, 30 min off Marine UL Listed Includes hex nuts and lock washers Includes hex nuts and lock washers Made in U.S.A.
39.99 USD

A high capacity footpump made of durable ABS plastic. Packs down for easy travel. Comes with adapter valves for Motormount boats, Transom boats, Paddleski, and kayak models.
39.00 USD

Horizon 12V Fast, powerful, and compact, the Horizon Windlasses are lightweight and proportioned to fit on any boat, even those with the smallest, most limited of foredecks. Permanent magnet motors and efficient internal spur gearings provide excellent torque with minimal power draw, and are protected by a fully sealed and waterproof, coated aluminum housing. Features include power up/down, emergency release, easy installation, and attractive design. This Horizon Windlass features a Gypsy/Drum configuration. The Gypsy/Drum models feature a drum in addition to the gypsy for additional control of rodes. All models include a up/down switch, circuit breaker, and mounting hardware. All this adds up to great windlasses guaranteed to provide years of reliable service in an often-challenging environment.
799.99 USD

Cabin Air Heater 12V 34K Btu Hr The QL Cabin Heater quickly gives you a nice and cozy climate on board. By using hot water generated from the engine cooling system the QL cabin heater provides heat for the cabin and helmsman seat. The hot water in the engine cooling system passes through the heater matrix in the cabin heater, where a 12vdc fan blows fresh air through the copper and brass heater matrix and uses the heat in the water to heat the air. The heated air is directed through air hoses to areas on board where the heat is needed. The QL Cabin Heater has 4 outlet vents which can be connected to air hoses and dash mounted grills. The QL Cabin Heater, unlike other heaters on the market, is constructed for the marine market and is constructed of stainless steel and other salt water resistant materials. Two models are available producing 17,000 or 34,000 BTU's with low electrical consumption. The QL Cabin Heater is easy to install. It can be installed horizontally or vertically. It has an air vent valve, so it can be installed higher than the engine's expansion tank. 411033019" X 6.3" X 9.3"Sh. Wt. 12 lbs.
439.99 USD

Cabin Air Heater 12V 34Kbtu Hr The QL Cabin Heater quickly gives you a nice and cozy climate on board. By using hot water generated from the engine cooling system the QL cabin heater provides heat for the cabin and helmsman seat. The hot water in the engine cooling system passes through the heater matrix in the cabin heater, where a 12vdc fan blows fresh air through the copper and brass heater matrix and uses the heat in the water to heat the air. The heated air is directed through air hoses to areas on board where the heat is needed. The QL Cabin Heater has 4 outlet vents which can be connected to air hoses and dash mounted grills. The QL Cabin Heater, unlike other heaters on the market, is constructed for the marine market and is constructed of stainless steel and other salt water resistant materials. Two models are available producing 17,000 or 34,000 BTU's with low electrical consumption. The QL Cabin Heater is easy to install. It can be installed horizontally or vertically. It has an air vent valve, so it can be installed higher than the engine's expansion tank. 4110330014.57" X 6.3" X 9.3"Sh. Wt. 12 lbs.Connects up to 4 vents for Cabin Comfort
459.99 USD