automatic float control

Automatic Float Switch The Automatic Float Switch converts any bilge pump that draws 12-amps (at 12 VDC) or less to fully automatic operation. It features a compact, low profile design that mounts on any surface from horizontal up to a 24 angle. It incorporates a reliable and affordable mechanical switch that actuates your bilge pumps motor at a 2'' water level. The sealed switch mechanism resists moisture, fume-ignition, and electrical shock.
28.99 USD

Turns bilge pumps on and off automatically...and mercury-free! Turns bilge pumps on and off as needed, automatically. Features a mercury-free, rolling-ball mechanism with an exclusive anti-spike feature to prevent the rapid on/off cycling encountered with some switches. Safer than mercury switches. Rugged thermoplastic construction Activation Method: Rolling metal ball Capacity: 15A Dimensions: 2 1/2"H x 3"W x 4 1/2"L Warranty: One Year
21.99 USD

Automatic Bilge Pump Rule Rule-Mate Series Fully Automatic Pumps contain the pump and the non-mercury float switch in a single, compact housing. As the water level rises, so does the float switch, activating the pump when the water level reaches 2-1/8''. There is no on/off cycling and therefore, no power use until the pump comes on. Features include easy clean snap-lock strainer bases, silent, vibrationless operation, anti-airlock protection, stainless steel shafts, and no burn-out when run dry. 12VDC.
149.99 USD

Fully-Automatic Bilge Pump Rule's completely submersible, fully-automatic bilge pumps eliminate the need for external float switches. These pumps turn on every 2-1/2 minutes for about one second to sense for water; if water is present the pump will run until all water is removed, then it will return to the sensing mode. Features include easy clean snap-lock strainer bases, silent, vibrationless operation, anti-airlock protection, stainless steel shafts, and no burn-out when run dry. 12VDC.
84.99 USD

1500 GPH Automatic Bilge Pump Rule's completely submersible, fully automatic bilge pumps eliminate the need for external float switches. These pumps turn on every 2-1/2 minutes for about one second to sense for water; if water is present the pump will run until all water is removed, then it will return to the sensing mode. Features include easy clean snap-lock strainer bases, silent, vibrationless operation, anti-airlock protection, stainless steel shafts, and no burn-out when run dry. 12VDC.
144.99 USD

Rule Fully-Automatic Bilge Pump - 500 GPH Rule's completely submersible, fully-automatic bilge pumps eliminate the need for external float switches. These pumps turn on every 2-1/2 minutes for about one second to sense for water; if water is present the pump will run until all water is removed, then it will return to the sensing mode. Features include easy clean snap-lock strainer bases, silent, vibrationless operation, anti-airlock protection, stainless steel shafts, and no burn-out when run dry. 12VDC.
52.99 USD

Series Full Automatic Pump - 1100 GPH The Rule-Mate Series of fully automated bilge pumps contain the pump and the non-mercury float switch in a single, compact housing. As the water level rises, so does the float switch, activating the pump when the water level reaches 2-1/8''. There is no on/off cycling and therefore, no power use until the pump comes on. Features include easy clean snap-lock strainer bases, silent, vibrationless operation, anti-airlock protection, stainless steel shafts, and no burn-out when run dry. 12VDC.
86.99 USD

It's jacket, a vest, and an automatic inflatable PFD, all in one! This comfortable, lightweight, all-season jacket is three products in one a jacket, a vest, and an automatic inflatable PFD! The lightweight boating jacket is waterproof and breathable to keep you dry in the rain, yet light enough and versatile enough to wear in varying temperatures and conditions. Wear the inflatable PFD separately, together with the jacket, or zip-off the sleeves for use as a vest. The inflatable PFD auto-inflates upon submersion, while expansion pleats in the jacket allow an unrestrictive fit when inflated. It also converts to Manual Only , allowing you to deactivate the auto-inflation feature. Includes ripcord and oral inflation tube for manual inflation. Features a brimmed tuckaway hood, 3M Scotchlite(TM) reflective detail, adjustable shock cord waist and integral harness access points for the addition of an optional safety harness. Provides 33.2lb of buoyancy, and qualifies as a USCG Type V with Type III performance: This vest must be worn to be counted in a vessel's inventory of PFDs. Made from waterproof, breathable ripstop nylon shell/urethane coated yellow nylon bladder, with zipper closures and adjustable side-release buckles. Should be serviced every two years.
299.99 USD

It's jacket, a vest, and an automatic inflatable PFD, all in one! This comfortable, lightweight, all-season jacket is three products in one a jacket, a vest, and an automatic inflatable PFD! The lightweight boating jacket is waterproof and breathable to keep you dry in the rain, yet light enough and versatile enough to wear in varying temperatures and conditions. Wear the inflatable PFD separately, together with the jacket, or zip-off the sleeves for use as a vest. The inflatable PFD auto-inflates upon submersion, while expansion pleats in the jacket allow an unrestrictive fit when inflated. It also converts to Manual Only , allowing you to deactivate the auto-inflation feature. Includes ripcord and oral inflation tube for manual inflation. Features a brimmed tuckaway hood, 3M Scotchlite(TM) reflective detail, adjustable shock cord waist and integral harness access points for the addition of an optional safety harness. Provides 33.2lb of buoyancy, and qualifies as a USCG Type V with Type III performance: This vest must be worn to be counted in a vessel's inventory of PFDs. Made from waterproof, breathable ripstop nylon shell/urethane coated yellow nylon bladder, with zipper closures and adjustable side-release buckles. Should be serviced every two years.
299.99 USD

It's jacket, a vest, and an automatic inflatable PFD, all in one! This comfortable, lightweight, all-season jacket is three products in one a jacket, a vest, and an automatic inflatable PFD! The lightweight boating jacket is waterproof and breathable to keep you dry in the rain, yet light enough and versatile enough to wear in varying temperatures and conditions. Wear the inflatable PFD separately, together with the jacket, or zip-off the sleeves for use as a vest. The inflatable PFD auto-inflates upon submersion, while expansion pleats in the jacket allow an unrestrictive fit when inflated. It also converts to Manual Only , allowing you to deactivate the auto-inflation feature. Includes ripcord and oral inflation tube for manual inflation. Features a brimmed tuckaway hood, 3M Scotchlite(TM) reflective detail, adjustable shock cord waist and integral harness access points for the addition of an optional safety harness. Provides 33.2lb of buoyancy, and qualifies as a USCG Type V with Type III performance: This vest must be worn to be counted in a vessel's inventory of PFDs. Made from waterproof, breathable ripstop nylon shell/urethane coated yellow nylon bladder, with zipper closures and adjustable side-release buckles. Should be serviced every two years.
299.99 USD