bilge pump

Bilge Pump Rule's completely submersible, non-automatic bilge pumps offer good performance at a value price. Designed to be installed in conjunction with a float switch or panel switch, these pumps feature easy clean snap-lock strainer bases, silent, vibrationless operation, anti-airlock protection, stainless steel shafts, and no burn-out when run dry. 12VDC.
34.99 USD

Bilge Cleaner This Heavy Duty Bilge Cleaner is a must for all boats with hard to reach bilge areas. Just pour the biodegradable cleaner into the bilge, run the boat, and then pump the bilge overboard. Dissolves and eliminates oil, grease, gasoline, scum, and sludge, protecting against vapor explosions.
26.99 USD

Bilge Pump Id Pl-2 Plastic ID plates are molded in black plastic with white letters abs bevel.
1.39 USD

Direct-Drive Bilge Pump Although relatively inexpensive, this pump has the performance and features of higher priced pumps. The direct-drive diaphragm allows the pump to run-dry for extended periods of time without damage, and also gives the pump self-priming capabilities allowing it to be installed above bilge and sump areas with only the intake hose in the bilge. 4 GPM pump rate.
239.99 USD

Ultima Bilge Pump Featuring patented Mirus Field Effect Sensing TechnologyUltimaBilge Pumps integrates the patented Ultima "field effect" sensing technology into the bilge pump body which creates a sleek, reliable compact, unit ready to install and run for years and years of unerring service. New digital technology uses patented Mirus field effect detector cells producing micro-electrical fields that detect disruptions caused by water and fluids. Pump activates at a 2" fluid level and deactivates at a ?" fluid level. 12V. No Mercury.
59.99 USD

Fully-Automatic Bilge Pump Rule's completely submersible, fully-automatic bilge pumps eliminate the need for external float switches. These pumps turn on every 2-1/2 minutes for about one second to sense for water; if water is present the pump will run until all water is removed, then it will return to the sensing mode. Features include easy clean snap-lock strainer bases, silent, vibrationless operation, anti-airlock protection, stainless steel shafts, and no burn-out when run dry. 12VDC.
84.99 USD

Tsunami Bilge Pump More Power! That's the number one request Attwood receives from boat builders, dealers and boaters alike. The Tsunami series is our answer. Three high-performance bilge pumps that mover water at output capacities of 500 GPH, 800 GPH and 1200 GPH. With their innovative engineering and compact design, tsunami pumps deliver high output from a small package.
15.99 USD

Bilge Pump - 2000 GPH Rule's completely submersible, non-automatic bilge pumps offer good performance at a value price. Designed to be installed in conjunction with a float switch or panel switch, these pumps feature easy clean snap-lock strainer bases, silent, vibrationless operation, anti-airlock protection, stainless steel shafts, and no burn-out when run dry. 12VDC.
115.99 USD

Bilge Pump- 800 GPH Rule's completely submersible, non-automatic bilge pumps offer good performance at a value price. Designed to be installed in conjunction with a float switch or panel switch, these pumps feature easy clean snap-lock strainer bases, silent, vibrationless operation, anti-airlock protection, stainless steel shafts, and no burn-out when run dry. 12VDC.
36.99 USD

Automatic Bilge Pump Rule Rule-Mate Series Fully Automatic Pumps contain the pump and the non-mercury float switch in a single, compact housing. As the water level rises, so does the float switch, activating the pump when the water level reaches 2-1/8''. There is no on/off cycling and therefore, no power use until the pump comes on. Features include easy clean snap-lock strainer bases, silent, vibrationless operation, anti-airlock protection, stainless steel shafts, and no burn-out when run dry. 12VDC.
149.99 USD