bow rail fittings

Open Bow Triangle Fat Sac Our new line of Pro X Series quick connect Fat Sacs and pumps has taken fat sacs to a higher level. our new VALMEX material, similar to river rafting material, is so strong tat punctures and abrasions are virtually a thing of the past. Our seams are welded and seam-taped so strong that common failures experienced with other's sacs won't happen. No longer search for an inner valve bladder, just connect, pump, and go. Once you use these sacs you will agree that all other sacs are obsolete. All of our Pro X Series Fat Sacs come with three fittings for ease of filling, emptying, venting and integrating. Fat Sacs are made rectangular for best fit and added weight.
179.99 USD

Bow Rail and Handrail Replacement Products Stainless steel fittings are made from high-quality cast and polished 316 stainless steel Chrome Zamak fittings are made from double-chrome-plated zinc Fittings are drilled and countersunk for #10 fasteners and include 1/4"-28 stainless set screws Type 304 stainless steel tubing is TIG (ultra high heat) welded, polished and buffed Aluminum tubing is bright anodized for a durable, high-quality finish
19.99 USD

Bow Rail and Handrail Replacement Products Stainless steel fittings are made from high-quality cast and polished 316 stainless steel Chrome Zamak fittings are made from double-chrome-plated zinc Fittings are drilled and countersunk for #10 fasteners and include 1/4"-28 stainless set screws Type 304 stainless steel tubing is TIG (ultra high heat) welded, polished and buffed Aluminum tubing is bright anodized for a durable, high-quality finish
22.99 USD

Bow Rail and Handrail Replacement Products Stainless steel fittings are made from high-quality cast and polished 316 stainless steel Chrome Zamak fittings are made from double-chrome-plated zinc Fittings are drilled and countersunk for #10 fasteners and include 1/4"-28 stainless set screws Type 304 stainless steel tubing is TIG (ultra high heat) welded, polished and buffed Aluminum tubing is bright anodized for a durable, high-quality finish
17.99 USD

Light, strong and tested tough, these aluminum tanks are the choice of many boat manufacturers. Built to meet the rigorous standards of the US Coast Guard as well as the NMMA. RDS fuel tanks are built of 5052 aluminum alloy and tested for their ability to retain pressure and withstand motion, impact and fire. Before welding, all aluminum parts are bathed in acid to eliminate any contamination that might weaken a weld or create the potential for leakage. Side corners are radius bent, not welded All Tanks-have 1/4" NPT pickup, 1 1/2" fill, and 1/2" vent fittings Add 3" to height for fittings All are fitted with plugs for diesel return Above-Deck Tanks have vented caps with gauge units Below-Deck Tanks have electrical sending units & removable vent plugs Dimensions: 21"L x 9"H Forward: 18 1/8" W Aft: 30" W
199.77 USD

Bright 304 polished stainless steel or bright anodized aluminum. Used for a multitude of applications including grab rails, bow rails, and canvas top frames. Match materials between components to minimize corrosion. Stainless has .049" wall thickness Aluminum has .058" wall thickness Use 7/8" tubing for smaller powerboats Use 1" tubing for sailboats and larger powerboats Available in 6', 12' and 20' lengths Note: Aluminum is recommended for fresh water use only.
41.99 USD

Safe off-the-deck stowage for Danforth-style anchors to 22lb.This anchor mount enables secure, off-the-deck storage and quick deployment of Danforth style anchors from 8-22 pounds. Mounts onto 1" diameter horizontal bow or stern rails and features a quick release mechanism with a locking hole to prevent accidental release. Closing latch enables one hand anchor engagement. 304 stainless steel. 7 3/4"H x 1 1/2"W.
52.99 USD

Bright 304 polished stainless steel or bright anodized aluminum. Used for a multitude of applications including grab rails, bow rails, and canvas top frames. Match materials between components to minimize corrosion. Stainless has .049" wall thickness Aluminum has .058" wall thickness Use 7/8" tubing for smaller powerboats Use 1" tubing for sailboats and larger powerboats Available in 6', 12' and 20' lengths Note: Aluminum is recommended for fresh water use only.
99.99 USD

Bright 304 polished stainless steel or bright anodized aluminum. Used for a multitude of applications including grab rails, bow rails, and canvas top frames. Match materials between components to minimize corrosion. Stainless has .049" wall thickness Aluminum has .058" wall thickness Use 7/8" tubing for smaller powerboats Use 1" tubing for sailboats and larger powerboats Available in 6', 12' and 20' lengths Note: Aluminum is recommended for fresh water use only.
99.99 USD

Bright 304 polished stainless steel or bright anodized aluminum. Used for a multitude of applications including grab rails, bow rails, and canvas top frames. Match materials between components to minimize corrosion. Stainless has .049" wall thickness Aluminum has .058" wall thickness Use 7/8" tubing for smaller powerboats Use 1" tubing for sailboats and larger powerboats Available in 6', 12' and 20' lengths Note: Aluminum is recommended for fresh water use only.
31.99 USD