Your search for 'engine systems' generated 2374 results 
Page 6 / 238
MONITOR KIT, RAW WATER
41.55 USD
Extend your boating season in to the crisp months of fall and beyond with an Acu-Heat Hydronic Heating System. They work much like your car's heating system. Hot engine coolant is circulated through a radiator and a powerful 12V fan blows air through it, forcing warm air to where you need it most. We offer these systems in 28,000 and 40,000 BTU capacities and in ducted or grilled configuration. The ducted heaters direct heat to cabin, rear seating, and cockpit areas, keeping everyone warm and toasty. They include six feet of duct hose per vent. The grilled heaters are perfect for heating cockpit areas or cabins. They mount easily in stairwells or cabin interiors and are often used in tandem with a ducted unit. Heaters (with corresponding controls) may be purchased alone or as part of a complete kit. Kits include 25' of 5/8" heater hose and a universal brass engine fitting and hose barbs for a hassle-free installation. A popular option for the ducted units is the Hot Tube Extendable Vent (included with model 2835189), which extends up to 6 feet, allowing placement under jackets or clothing, surrounding your self with luxurious warmth. Heat Source: Engine coolant Material: Powder coated marine aluminum Warranty: two years
199.99 USD
Winterize your outboard or sterndrive with this convenient kitUses your existing flusher and a garden hose to winterize your outboard or sterndrive engine, even while it s on the trailer. Kit includes a five-gallon jug, hose fittings and instructions for winterizing. You supply five gallons of nontoxic antifreeze for each engine. Complete instructions are included. Reusable.
49.99 USD
A winch-style handle for Teleflex engine controls Use a winch style handle for your engine control and never get your lines caught again! Using ATCU under power is exactly like using a normal throttle lever, except you can remove the handle at any time. Run the engine in neutral simply by pushing the handle inward, which disengages the clutch Return the handle to the minimum throttle position, and it smoothly re-engages. The ATCU/1 Faceplate is designed to fit Teleflex model B700, CH2100P and CH2600P engine controls. It replaces the standard faceplate and handle provided with those controls, adapting them for use on a sailboat with removable winch handle throttle control. Includes faceplate with adapters and custom lever handle (also fits most winch handles with eight-point star drive pattern). No risk of line snags when sailing or under power Allows the engine control to be located anywhere on deck Deters boat theft 3 15/16"H (98mm) x 4"W (100mm) Four fasteners on 3" (75mm) centers Teleflex control unit and cables not included Five year warranty
249.99 USD
This thermostatically controlled heater automatically turns on at approximately 45 F to ensure the ambient air temperature in your engine room remains above freezing. It saves you the time and trouble of annually winterizing the engine and helps extend your boating season into the colder months. Due to the increased potential for heat loss, boats stored out of the water require the large 750W heater. For single-engine boats up to 24' that are stored in the water, choose the 250W model which includes 2" mounting feet and a 15'L power cord with a 120V AC grounded plug. The 750W model is for single and twin-engine boats to about 40'. It has 2" mounting feet and includes a 20'L power cable with bare ends for hard wiring. Boats larger than 40' may require two of the 750W heaters for adequate protection. Our product specialists can assist you in making this determination. Both models automatically shut off at 55 F to keep operating costs low. Powder-coated housing. Ignition protected. Btu per Hour: 860 Watts: 250W Cabin Size: To 150cu. ft. Dimensions: 4-1/2"W x 5-1/2"H x 14-1/2"L Power Source: 120V AC Draw: 2.2A Material: Cast Aluminum Warranty: Lifetime service guarantee
299.99 USD
This thermostatically controlled heater automatically turns on at approximately 45 F to ensure the ambient air temperature in your engine room remains above freezing. It saves you the time and trouble of annually winterizing the engine and helps extend your boating season into the colder months. Due to the increased potential for heat loss, boats stored out of the water require the large 750W heater. For single-engine boats up to 24' that are stored in the water, choose the 250W model which includes 2" mounting feet and a 15'L power cord with a 120V AC grounded plug. The 750W model is for single and twin-engine boats to about 40'. It has 2" mounting feet and includes a 20'L power cable with bare ends for hard wiring. Boats larger than 40' may require two of the 750W heaters for adequate protection. Our product specialists can assist you in making this determination. Both models automatically shut off at 55 F to keep operating costs low. Powder coated housing. Ignition protected. Btu per Hour: 2600 Watts: 750W Cabin Size: To 650cu. ft. Dimensions: 6-1/2"W x 6-1/2"H x 21"L Power Source: 120V AC Draw: 6.5A Material: Cast Aluminum Warranty: Lifetime service guarantee
399.99 USD
Sea Eagle 14SR Inflatable sport boat. Deluxe Package. Carries 7 adults, 40 HP engine. Double reinforced 19" inflatable tubes.
2249.00 USD
An easy way to extend your inboard engine s life Installs on raw water strainer for inboard engines in minutes without tools. The telescoping tube allows precise alignment for hard-to-reach areas. Flush away sand, silt and alkali while the boat is on the trailer. Large cup ensures no fall-off and blow-by during flushing
39.99 USD
TCW3 Engine Oil for high-performance 2-cycle Ashless additives prevent pre-ignition and corrosion Meets or exceeds manufacturer s specifications
38.49 USD
Automatically shuts down engines and powered ventilation upon discharge of the Sea-Fire Fire extinguishing System. Includes panel mount display with visual and audible alarms, discharge lights and an override switch for engine restart and control
79.67 USD