evinrude prop 4 blade

Black Diamond Prop - 10-7/8" R11
152.99 USD

Black Diamond Prop - 9" R9
99.99 USD

Black Diamond Prop - 12-1/4" R9
152.99 USD

9'6" Four man inflatable fisher/tender. 1000 Denier hull material, quadruple overlap seams Takes up to 8 hp. 3 year warranty
1149.00 USD

MKP-11 Prop Nut 5/16'' (C) Easy-to-use kit that allows for fast removal/replacement of prop. Available in three different sizes to fit Minn Kota prop dimensions (3/8", 1/2",and 5/16"). Requires crescent wrench for installation.
8.99 USD

MKP-10 Prop Nut 1/2'' (B) Easy-to-use kit that allows for fast removal/replacement of prop. Available in three different sizes to fit Minn Kota prop dimensions (3/8", 1/2",and 5/16"). Requires crescent wrench for installation.
8.99 USD

The asymmetrical spoon blade design of this Cannon Kayak paddle allows for smooth entries and an even pull, maximizing the power from your stroke. Made with ABS/Fiberglass composite blades and an aluminum shaft that disconnects in the center.
79.00 USD

For on the water repairs!This 1-1/16in yellow six point socket style prop wrench is a must-have item for on-the water repairs.
19.99 USD

Sea Eagle 380x inflatable kayak. 12'4" long, holds 2 adults. Rated for up to class 4 whitewater.
899.00 USD

Johnson/Evinrude-Omc Square Zinc Boater's World is your Sacrificial Anode Center. We want to make sure engine troubles don't keep you from having fun on the water! No matter where you choose to do your boating, we have all the right products to help take care of your boat. Read this quick overview on how to protect you engine from corrosion!What causes corrosion? Seawater is a good conductor and freshwater a bad conductor, so corrosion is worse in seawater. Generally, corrosion rates increase in proportion to the amount of oxygen in the water. However, cracks and crevices, which are areas starved of oxygen, become anodic and corrode also. Higher temperature increases corrosion rates - doubling for every 30 degrees C (55 degrees F). There are various types of microorganisms that can contribute to corrosion, either by removing protection or causing a corrosive environment.Why do I need anodes? You need anodes on your engine because when two different metals are in contact, electrons will flow from the more negatively charged metal (anode) to the more positive metal (cathode). If you want to protect both types of metal from corrosion, you must add a third metal such as zinc, although magnesium and aluminum are also used. This active metal becomes the anode for both metals. The zinc or aluminum sacrifices itself to protect the other two metals, hence the term "sacrificial anode".Do's and Don'tsDO change your anode when they are 50 percent corroded DO make sure they make good electrical contact - remove paint and clean the mounting surface.DO protect trim tabs individually (do not bond). Although they are usually made from stainless steel they can still corrode and need sacrificial anodes.DO be sure to use new fasteners on sterndrives - even stainless bolts fail as a result of corrosion.DO keep a sterndrive immersed in the water so that the anodes can work. DON'T use zinc anodes on aluminum outdrivesDON'T paint anodes. They will not work to their full potential!DON'T mix anode types - aluminum anodes will try to protect zinc.DON'T use magnesium anodes on outdrives in salt or brackish water as it will "overprotect" the aluminum.
12.99 USD