fish finder with Transducer

B60 Tilted Element Transducer Bronze housing, Dual frequency 50/200 kHz Use with DSM 300 Blackbox Sounder 12 tilted version for 8 -15 hull deadrise Energy Efficiency
279.99 USD

Thru Hull Transducer (Bronze) with Temp - 200Khz 12Deg Bronze, thru-hull mount transducer with depth and temp. Operating frequency of 200 kHz. Beamwidth of 12 degrees. Transducer kit comes with installation instructions. Follow the instructions carefully so you don't mangle your boat in the process.
159.99 USD

Plastic Thru Hull Transducer - 200Khz 12 Deg Plastic, thru-hull mount transducer with depth and temp. Operating frequency of 200 kHz. Beamwidth of 12 degrees. Transducer kit comes with installation instructions. Follow the instructions carefully so you don't mangle your boat in the process.
99.99 USD

Plastic Thru Hull Transducer - 200/45Khz 14/45Deg Plastic, thru-hull mount transducer with depth. Operating frequency of 200 and 50 kHz. Beamwidth of 14 degrees at 200 kHz, 45 degrees at 50 kHz. Transducer kit comes with installation instructions. Please follow these instructions carefully to ensure proper operation.
79.99 USD

Protects all types of non-aluminum underwater metals Formulated to protect electronics transducers from underwater fouling in both fresh and salt water. For use only on bare metals such as steel, stainless steel, cast iron, copper, bronze, galvanized steel and lead. It forms an excellent adhesive bond to underwater metals and running gear and inhibits corrosion. Because of its smooth hard surface air will self-clean in service, and can be used above or below the waterline. Do not overcoat with antifouling paint. Spray can for easy application. 16oz. Dark gray. Type: Modified epoxy Recommended Usage: Transducers and underwater metals Biocide: Zinc Additives: None Number of Coats Recommended: Two full coats Coverage: 10 sq.ft./can Drying Time: One hour
27.99 USD

The HST-WSBL transom-mount, 20 , 200kHz Skimmer Transducer with temperature sensor. Works with: LCX-110C, LCX-111C HD, LCX-17M, LCX-20C, LCX-25C, LCX-26C HD, LMS-332C, LMS-334C iGPS, LMS-480, X102C, X125, X135, X52 Energy Efficiency
59.99 USD

Plastic Thru Hull Transducer with Speed and Temp Thru hull mount, plastic, temp & speed only10-10365-00
110.99 USD

The 520s has a worldwide basemap, the 530s is preloaded with U.S. inland lakes data and the 540s is preloaded with marine maps for all U.S. coastal areas, including Alaska and Hawaii Plotter/fishfinder combo features UltraScroll updates, Auto Guidance and CANet sonar-sharing technology. The built-in sounder can scan as deep as 1500 (with dual frequency transducer) to clearly paint depth contours, fish targets, structure, etc. And available Auto Guidance capability shows you which way to navigate with graphical onscreen steering cues. An SD card slot allows the easy plug in of additional map areas or software features. The 520s has a worldwide basemap. The 530s is preloaded with U.S. inland lakes data and the 540s is preloaded with marine maps for all U.S. coastal areas, including Alaska and Hawaii. Display Type: 256 color TFT Screen Resolution: 240 x 320 Screen Size: 5"diagonal Features: UltraScroll , A-scope, round flasher modes, auto gain with Dynacolor , CANet bus, See-Thru technology Waypoints and Routes: 3000/50 Transmit Power: 400W RMS (dual frequency), 500W RMS (dual beam) Maximum Depth: 1500' (dual frequency), 900' (dual beam) Waterproof: IPX7 waterproof Warranty: One year
799.99 USD

491 Sounder Transducer - In-Hull Dual Frequency Transducer 50/200Khz 600Watt/1Kw - Includes Mounting Tank (w/ 10 pin connector attached)Dual Freq. 600W/1KW Depth Transducer (in hull mounting) includes mounting tank.TD1009Sh. Wt. 5 lbs.
699.99 USD

Fairing Block for 1kW Thru Hull Transducer This Bronze Thru Hull featuring 1 kW is a necessary accessory to complete your NAVnet Sounder.
224.99 USD