gas/water separator

Designed to prevent the discharge of fuel overboard from the vent line while re-fueling or underway. The patented unit installs easily in the vent line. For diesel and gasoline boats Use one Lifeguard for each vent line Fits standard 5/8" hose Can be installed up to 45 of of vertical Fully automatic, marine rated
99.99 USD

Remove cooling water from exhaust systemsUse with the Vernalift muffler or other lift-type mufflers on gensets and small auxiliary engines. Position the water drain from the Gen-Sep just below the water line to eliminate water splash, especially important for nighttime operation. The Gen-Sep replaces the loop that is normally used, and should be installed above the outlet of the muffler, at the highest point in the system. Gen-Sep will remove nearly all of the cooling water from the exhaust. That water can then be drained to a hull fitting just below the waterline, thus eliminating excess noise often created by splashing and pulsating water flow at the exhaust outlet. A slight downward angle is required for both the exhaust outlet and the exhaust gas tube
234.99 USD

Remove harmful contaminants without filtering detergent additivesRemove harmful contaminants without filtering detergent additives. Engineered for long life, low restriction and efficient filtering performance. For diesel and some gasoline applications.
11.99 USD

Stainless-steel or aluminum Bracket and Filter Assemblies add fuel/water separating capability to any outboard, I/O or inboard. 28 micron filters have 66 pleats. More pleats means more capacity. Kits include one 18-7845 (Mercury long style) filter. Will not separate 2-cycle oil from gasoline. Not for use with diesel applications.
39.99 USD

High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. They re engineered for today s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. Today s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage. Contaminants of over 10 micron size also can cause severe damage with the close tolerances of today s fuel pumps and injectors. That is why a high efficiency water separating filter is so important. Sierra 10 micron filters were independently tested to JIS, SAE J1839/J905 and ISO 4548-12 standards.
21.88 USD

High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. They re engineered for today s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. Today s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage. Contaminants of over 10 micron size also can cause severe damage with the close tolerances of today s fuel pumps and injectors. That is why a high efficiency water separating filter is so important. Sierra 10 micron filters were independently tested to JIS, SAE J1839/J905 and ISO 4548-12 standards.
39.99 USD

Traps the smallest particles and emulsifies water from gasoline with 21-micron filter media. Epoxy coated inside and powder-coated outside for corrosion resistance. Shrink-wrapped for rust protection. Not recommended for use on diesel engines or with electric fuel pumps using in-line fuel filters. Will not separate two-cycle oil from gasoline. 21 Micron filter elements shaped into 66 pleats; more pleats mean more capacity Meets OEM specifications; made in the USA Will not separate 2-cycle oil from gasoline. Do not use with diesel
9.99 USD

Remove harmful contaminants without filtering detergent additivesRemove harmful contaminants without filtering detergent additives. Engineered for long life, low restriction and efficient filtering performance. For diesel and some gasoline applications.
14.99 USD

Remove cooling water from exhaust systemsUse with the Vernalift muffler or other lift-type mufflers on gensets and small auxiliary engines. Position the water drain from the Gen-Sep just below the water line to eliminate water splash, especially important for nighttime operation. The Gen-Sep replaces the loop that is normally used, and should be installed above the outlet of the muffler, at the highest point in the system. Gen-Sep will remove nearly all of the cooling water from the exhaust. That water can then be drained to a hull fitting just below the waterline, thus eliminating excess noise often created by splashing and pulsating water flow at the exhaust outlet. A slight downward angle is required for both the exhaust outlet and the exhaust gas tube
214.99 USD

Remove harmful contaminants without filtering detergent additivesRemove harmful contaminants without filtering detergent additives. Engineered for long life, low restriction and efficient filtering performance. For diesel and some gasoline applications.
9.99 USD