gm 5.0 hose kit

Safety Seacock Conversion Screws into the top of any seacock and turns it into a safety seacock. The quick-release plug enables high-powered emergency bilge pumping, and pumping deep or inaccessible bilge areas, with your engine(s) acting as the pump(s). quick and easy cooling-system flushing winterization draining
122.99 USD

Safety Seacock Conversion Screws into the top of any seacock and turns it into a safety seacock. The quick-release plug enables high-powered emergency bilge pumping, and pumping deep or inaccessible bilge areas, with your engine(s) acting as the pump(s). quick and easy cooling-system flushing winterization draining
109.99 USD

Safety Seacock Conversion Screws into the top of any seacock and turns it into a safety seacock. The quick-release plug enables high-powered emergency bilge pumping, and pumping deep or inaccessible bilge areas, with your engine(s) acting as the pump(s). quick and easy cooling-system flushing winterization draining
117.99 USD

Safety Seacock Conversion Screws into the top of any seacock and turns it into a safety seacock. The quick-release plug enables high-powered emergency bilge pumping, and pumping deep or inaccessible bilge areas, with your engine(s) acting as the pump(s). quick and easy cooling-system flushing winterization draining
122.99 USD

Safety Seacock Conversion Screws into the top of any seacock and turns it into a safety seacock. The quick-release plug enables high-powered emergency bilge pumping, and pumping deep or inaccessible bilge areas, with your engine(s) acting as the pump(s). quick and easy cooling-system flushing winterization draining
109.99 USD

Quiet and pulsation-free, even at low speeds, our pumps are designed to provide perfect water pressure for single and multiple outlet installations. Compared to older three or four chamber designs, the five chamber design, coupled with cushioned mounting feet, results in lower motor speeds, whisper-quiet operation and dramatically reduced pulsation. The snap-in diaphragm design makes change outs a breeze, and the innovative snap-in ports accommodate most common hose/fitting combinations. Switch Type: Sealed 41 psi pressure switch Material: Base: Powdercoated steel; pump body: powdercoated steel Port Sizes: Quick-connect ports and fittings for 1/2", 3/4" ID hose, 3/4" GHT and 3/8" BSP Warranty: Three years
159.99 USD

Pipe-Hose Tail Adapter 3/4" X 1/2" Hose ID x FIP : 3/4" x 1/2"
4.99 USD

Pipe To Hose 90 Deg Elbow1-1/2"X1/2" Hose Size : 1-1/2 Thread Size : 1-1/2"
6.99 USD

Just right for boats with limited space. This locker holds a 4-lb. tank, regulator, leak test gauge and solenoid (all included). Also includes a vent kit. Easy installation and tank swapping. Designed for installation above the waterline only. 13''W x 13''D x 12''H. Material: Roto Molded ABS Plastic Capacity: 4lb. Tank Vent Fittings: Yes Wire Fittings: Molded into Solenoid LP Hose Fitting: Swedged onto hose Lid Hardware: Stainless Latch Regulator Included: Yes ABYC Approval: ABYC Recommended Exterior Dimensions: 13"W x 13"D x 12"H Warranty: 2 Years Parts & Labor
499.99 USD

Just right for boats with limited space. This locker holds a 4-lb. tank, regulator, leak test gauge and solenoid (all included). Also includes a vent kit. Easy installation and tank swapping. Designed for installation above the waterline only. 13''W x 13''D x 12''H. Material: Roto Molded ABS Plastic Capacity: 4lb. Tank Vent Fittings: Yes Wire Fittings: Molded into Solenoid LP Hose Fitting: Swedged onto hose Lid Hardware: Stainless Latch Regulator Included: Yes ABYC Approval: ABYC Recommended Exterior Dimensions: 13"W x 13"D x 12"H Warranty: 2 Years Parts & Labor
499.99 USD