hydraulic hoses mercruiser alpha one

Solid Bronze MerCruiser End Cover. Stop replacing your rusted out end cover...repeatedly. Install a solid bronze Jabsco end cover for MerCruiser pumps - then forget rust forever! Fits above pump and original MerCruiser pumps.
122.99 USD

S1000 SmartPilot Hydraulic Autopilot System with Wireless Controller The SmartPilot S1000 autopilot is the perfect fit for powerboats up to 25 feet in length equipped with SeaStar hydraulics. Everything you need to install the autopilot comes in one box.With minimal wiring and no complicated compass or rudder reference to install, you can have your autopilot running in record time.The wireless control has an intuitive menu with a bold clear display.The S1000 is safe and easy to use. Once out on the water, you will find the S1000 to be a critical factor in helping you catch more fish. Dedicated fishing patterns in the form of a cloverleaf, zig-zag and orbit point as well as the ability to troll at low speeds will add to the success of every fishing trip you take.Engineered to achieve the greatest accuracy without a rudder reference, the S1000 has a standard steer to heading mode which puts you on the most direct course while reducing the amount of fuel consumed. Raymarine's proprietary SmartSteer technology intelligently calculates the rate of turn relative to the boat speed.You can connect your Raymarine GPS to the S1000 via the SeaTalk connection or a common NMEA input. Raymarine even included an adaptor that you can use for an easy connection to third party NMEA 0183 compatible GPS.
879.99 USD

Aluminum Anode Kit - Fits 1991& newer Alpha One Gen II drives s/n 0D469829 & up Part # :888756Q01
79.99 USD

Patented design utilizes stainless steel support rods instead of the typical design with aluminum rods rubbing against UHMW or other plastic-type composites. All-in-One jack plates are laboratory tested to exceed 65 tons of sheer. Exclusive bronze oil-lite bushings with zerk grease fittings and dual wipers keep salt, sand, and silt off stainless rods. Anodized aluminum body won't chip. Two control system/switch options: OBD models include instrument panel mounted rocker switch control. OEZ models feature the Ex-Zact Dial System with an easy-operation dial control that returns the plate to within 1/8" of the desired location every time, and eliminates the need to visually reference engine position. Rated for engines to 300hp (or 625lbs.). Vertical lift: 6".
1159.00 USD

Patented design utilizes stainless steel support rods instead of the typical design with aluminum rods rubbing against UHMW or other plastic-type composites. All-in-One jack plates are laboratory tested to exceed 65 tons of sheer. Exclusive bronze oil-lite bushings with zerk grease fittings and dual wipers keep salt, sand, and silt off stainless rods. Anodized aluminum body won't chip. Two control system/switch options: OBD models include instrument panel mounted rocker switch control. OEZ models feature the Ex-Zact Dial System with an easy-operation dial control that returns the plate to within 1/8" of the desired location every time, and eliminates the need to visually reference engine position. Rated for engines to 300hp (or 625lbs.). Vertical lift: 6".
899.00 USD

Type A: Fits Merc/Mar 4hp (1-cyl), Model 75 (7.5hp) and Model 110/9.8hp when the water impeller ID measures 0.456" Type B: Fits all Mercruiser Alpha One Generation II drives with serial number OD 469859 and above Type C: Fits Merc/Mar 6/8/9.9hp 2-cycle outboards (USA OA197112 & above, BEL 9461526 & above), 15hp 2-cycle and 9.9/15hp 4-stroke outboards (non-bigfoot) (USA OB292414 & above BEL 9542620) Type D & E: Fits all Merc/Mar 65hp 4-cyl) through V-6 outboards with short-vane impellers and fit Mercruiser I/R/MR/Alpha drives (S/N 2495186-OD469858) Type F: Fits all Mercruiser engines with a plastic, 2-piece body sea water pump
31.99 USD

Type A: Fits Merc/Mar 4hp (1-cyl), Model 75 (7.5hp) and Model 110/9.8hp when the water impeller ID measures 0.456" Type B: Fits all Mercruiser Alpha One Generation II drives with serial number OD 469859 and above Type C: Fits Merc/Mar 6/8/9.9hp 2-cycle outboards (USA OA197112 & above, BEL 9461526 & above), 15hp 2-cycle and 9.9/15hp 4-stroke outboards (non-bigfoot) (USA OB292414 & above BEL 9542620) Type D & E: Fits all Merc/Mar 65hp 4-cyl) through V-6 outboards with short-vane impellers and fit Mercruiser I/R/MR/Alpha drives (S/N 2495186-OD469858) Type F: Fits all Mercruiser engines with a plastic, 2-piece body sea water pump
19.99 USD

Type A: Fits Merc/Mar 4hp (1-cyl), Model 75 (7.5hp) and Model 110/9.8hp when the water impeller ID measures 0.456" Type B: Fits all Mercruiser Alpha One Generation II drives with serial number OD 469859 and above Type C: Fits Merc/Mar 6/8/9.9hp 2-cycle outboards (USA OA197112 & above, BEL 9461526 & above), 15hp 2-cycle and 9.9/15hp 4-stroke outboards (non-bigfoot) (USA OB292414 & above BEL 9542620) Type D & E: Fits all Merc/Mar 65hp 4-cyl) through V-6 outboards with short-vane impellers and fit Mercruiser I/R/MR/Alpha drives (S/N 2495186-OD469858) Type F: Fits all Mercruiser engines with a plastic, 2-piece body sea water pump
46.99 USD

Type A: Fits Merc/Mar 4hp (1-cyl), Model 75 (7.5hp) and Model 110/9.8hp when the water impeller ID measures 0.456" Type B: Fits all Mercruiser Alpha One Generation II drives with serial number OD 469859 and above Type C: Fits Merc/Mar 6/8/9.9hp 2-cycle outboards (USA OA197112 & above, BEL 9461526 & above), 15hp 2-cycle and 9.9/15hp 4-stroke outboards (non-bigfoot) (USA OB292414 & above BEL 9542620) Type D & E: Fits all Merc/Mar 65hp 4-cyl) through V-6 outboards with short-vane impellers and fit Mercruiser I/R/MR/Alpha drives (S/N 2495186-OD469858) Type F: Fits all Mercruiser engines with a plastic, 2-piece body sea water pump
77.99 USD

Type A: Fits Merc/Mar 4hp (1-cyl), Model 75 (7.5hp) and Model 110/9.8hp when the water impeller ID measures 0.456" Type B: Fits all Mercruiser Alpha One Generation II drives with serial number OD 469859 and above Type C: Fits Merc/Mar 6/8/9.9hp 2-cycle outboards (USA OA197112 & above, BEL 9461526 & above), 15hp 2-cycle and 9.9/15hp 4-stroke outboards (non-bigfoot) (USA OB292414 & above BEL 9542620) Type D & E: Fits all Merc/Mar 65hp 4-cyl) through V-6 outboards with short-vane impellers and fit Mercruiser I/R/MR/Alpha drives (S/N 2495186-OD469858) Type F: Fits all Mercruiser engines with a plastic, 2-piece body sea water pump
57.99 USD