johnson 15 hp outboard forward control kit

Outboard Anodes - Mercury/Force/Mariner Manufacturer: Canada Metals
29.99 USD

Outboard Anodes - Mercury/Force/Mariner Manufacturer: Canada Metals
25.99 USD

Outboard Anodes - Mercury/Force/Mariner Manufacturer: Canada Metals
19.99 USD

Outboard Anodes - Mercury/Force/Mariner Manufacturer: Canada Metals
25.99 USD

Quicksilver Fourstroke Outboard Oil Filter Fits the 200/225/250/275 hp
11.99 USD

Precise steering control for high-speed outboard boats SeaStar PRO outboard steering systems are the choice for high speed single-engine outboard boats, like bass, flats, combo race/ski and other performance boats with speeds above 65mph. Recommended for single non-power-assisted outboards up to 300hp. SeaStar PRO has steered the Bass Masters Classic since 1994. The easy-to-install Sea Star PRO kit is built using the same components used in factory boatbuilding. The kit includes a 2.0 PRO HH5770 helm, semi-universal front mount HC5345 cylinder, two quarts of oil and an installation guide. Kit can be used with jackplates (allow enough hose length for full steering motion and no interference during trim and tilt) and performance props. Compact helm has a 4 7/16" footprint and requires only a 3" cutout. Match the helm with Kevlar reinforced HO57XX hoses. Meets ABYC standards and NMMA requirements. Horsepower: Single engine 300hp; dual engine 600hp Speed: 60mph + Helm: 2.0 cu.ft. capacity Hose: Kevlar reinforced, 1500PSI Turns Lock-to-Lock: 4.25 Included equipment: Helm pump, cylinder, bleeder kit. Hoses sold separately. (Uses HO57XX series) Steering Wheel: Not included Steering Wheel Shaft: 3/4" tapered Warranty: Two years
1039.00 USD

Standard Cylinder Kit The worlds most popular outboard hydraulic system offers smooth, super efficient steering for today's high performance hulls with single or multiple outboards up to 600 hp Combined. Fits most large outboards including Honda, Johnson/ Evinrude, Mercury/ Mariner, Nissan/ Tohatsu, Suzuki, US Marine/Force Yamaha and Yanmar. Ideal for cruisers, runabouts, center console boats and many more. Suitable for speeds up to 60 MPH and dual station use (with purchase of extra helm, hose & fittings). For use with all applications except those listed below. For 115-130 HP. Honda engines from 1998 to present Model: HC5345Sh. Wt. 5 lbs.
549.99 USD

Built to hold motors up to 15 hp or 100 lbs/45 kg The Edson Stern Rail Outboard Motor Mount is built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with nonskid pad, bolted to the UV stable poly backing board always looks shipshape... no more varnishing. Comes complete with hardware to attach to any standard 1'' (2.5cm) stainless rail Bottom cleat comes unattached so that it will fit any rail spacing Warning: Be sure the engine is securely tied onto the backing board and the engine mounts are tightened whenever the engine is stored on Edson's Outboard Motor Mount. Use the tilt feature on the engine to allow the lower unit to rest on the backing plate or add a block of wood to provide this support.
314.99 USD

Easy installation, and made to fit most single/twin outboards A popular choice for unmatched comfort and control of your outboard, this steering system offers smooth and efficient steering for all hull types. Use with single outboards up to 300hp and dual outboards up to 600hp total. The kit contains a smooth front mount 1.7 c.i. displacement helm pump, semi-universal front-mount cylinder, two quarts of oil, bleeder kit and installation guide. Order the popular HK6300 kit complete with set of two 22' hoses, or purchase hoses separately. Your HO51XX hoses are available in even foot lengths. The compact helm has a 4-7/16" footprint and requires a 3" cutout. Meets ABYC standards and NMMA requirements. Maximum Horsepower: Single engine 300hp; dual engine 600hp Speed: 0 60mph Helm: 1.7 cu. ft. capacity Hose: 1,000PSI Turns Lock-to-Lock: 5 Included Equipment: Helm, cylinder and bleeder kit. Hoses (H051 series) sold separately. Steering Wheel: Not included. Steering Wheel Shaft: 3/4" tapered Installation: Tie bar (sold separately) is required for dual engines Warranty: Two years
979.00 USD

Easy installation, and made to fit most single/twin outboards A popular choice for unmatched comfort and control of your outboard, this steering system offers smooth and efficient steering for all hull types. Use with single outboards up to 300hp and dual outboards up to 600hp total. The kit contains a smooth front mount 1.7 c.i. displacement helm pump, semi-universal front-mount cylinder, two quarts of oil, bleeder kit and installation guide. Order the popular HK6300 kit complete with set of two 22' hoses, or purchase hoses separately. Your HO51XX hoses are available in even foot lengths. The compact helm has a 4-7/16" footprint and requires a 3" cutout. Meets ABYC standards and NMMA requirements. Maximum Horsepower: Single engine 300hp; dual engine 600hp Speed: 0 60mph Helm: 1.7 cu. ft. capacity Hose: 1,000PSI Turns Lock-to-Lock: 5 Included Equipment: Helm, cylinder and bleeder kit. Hoses (H051 series) sold separately. Steering Wheel: Not included. Steering Wheel Shaft: 3/4" tapered Installation: Tie bar (sold separately) is required for dual engines Warranty: Two years
999.00 USD