kicker bracket

Portable Mounting Bracket - for Geko, 76, 176 & Streetpilot Series GPS Units This portable, adjustable mount is ideal for contoured dashes or for use in rental cars or any situation where you don't want to permanently mount your GPS. Just slide the unit into the center mounting mechanism, rotate for best viewing angle and lock into place. Requires automotive mounting adapter, Catalog #:319617874.
29.99 USD

Mounting Bracket for Garmin 76 Series Handheld GPS Units Free up your hands to drive the boat, fish, or just enjoy your time on the water. This adjustable marine mount swivels and tilts for optimum viewing and has a locking mechanism to keep unit secure. Accepts optional external power adapter for quick connection to a DC power supply.
29.99 USD

The E.Z. Steer outboard bracket and steering rod assembly enables you to steer your auxiliary outboard from your primary steering station. This is especially useful for those with auxiliary trolling motors or emergency ''kickers.'' You no longer have to hang over the transom to steer! Once installed, there is no need to connect or disconnect the steering--just leave it in place Positive steering is maintained even if either engine is tilted Installation is easy and only requires a wrench and screwdriver Kits include stainless steel brackets for both engines, covered with black vinyl to prevent scratching, stainless steel connecting rods with Delrin ball joints and brass inserts, and all mounting hardware
69.99 USD

Rugged, fast-performing sport compasses have fully-adjustable mounts with a range of over 300 for use on ski boats, runabouts, bass boats, cars, trucks and RV's. 2 1/2" direct reading dials feature easy-to-read graphics, 12V green night lighting and built-in compensators to correct for deviation. A high-impact rubber accent strip around the compass prevents damage. Apparent Card Dia.: 2 1/4" Card Type: Direct Mounting Style: Surface or reversible bracket Case Material: Reinforced polymer Lubberlines: Yes Clinometer: No Lighting: Yes Cover/Shield: No Warranty: Five years
39.99 USD

Rugged, fast-performing sport compasses have fully-adjustable mounts with a range of over 300 for use on ski boats, runabouts, bass boats, cars, trucks and RV's. 2 1/2" direct reading dials feature easy-to-read graphics, 12V green night lighting and built-in compensators to correct for deviation. A high-impact rubber accent strip around the compass prevents damage. Apparent Card Dia.: 2 1/4" Card Type: Direct Mounting Style: Surface or reversible bracket Case Material: Reinforced polymer Lubberlines: Yes Clinometer: No Lighting: Yes Cover/Shield: No Warranty: Five years
41.99 USD

Rugged, fast-performing sport compasses have fully-adjustable mounts with a range of over 300 for use on ski boats, runabouts, bass boats, cars, trucks and RV's. 2 1/2" direct reading dials feature easy-to-read graphics, 12V green night lighting and built-in compensators to correct for deviation. A high-impact rubber accent strip around the compass prevents damage. Apparent Card Dia.: 2 1/4" Card Type: Direct Mounting Style: Surface or reversible bracket Case Material: Reinforced polymer Lubberlines: Yes Clinometer: No Lighting: Yes Cover/Shield: No Warranty: Five years
39.99 USD

Use this tiller bracket to attach a tiller to the rudder head. Made from electropolished stainless steel, 9"L x 1.5"W, with one 3/8" hole at the rudderhead end, and two 1/4" holes for through-bolting to the tiller. Tiller shim kits increase the width of the tiller to fit the exact rudder thickness. Made of HDPE, the shim kits are pre-drilled with holes to match the tiller bracket Use a single shim or multiple shims in combination to add whatever thickness is required
19.99 USD

Use this tiller bracket to attach a tiller to the rudder head. Made from electropolished stainless steel, 9"L x 1.5"W, with one 3/8" hole at the rudderhead end, and two 1/4" holes for through-bolting to the tiller. Tiller shim kits increase the width of the tiller to fit the exact rudder thickness. Made of HDPE, the shim kits are pre-drilled with holes to match the tiller bracket Use a single shim or multiple shims in combination to add whatever thickness is required
12.99 USD

Use this tiller bracket to attach a tiller to the rudder head. Made from electropolished stainless steel, 9"L x 1.5"W, with one 3/8" hole at the rudderhead end, and two 1/4" holes for through-bolting to the tiller. Tiller shim kits increase the width of the tiller to fit the exact rudder thickness. Made of HDPE, the shim kits are pre-drilled with holes to match the tiller bracket Use a single shim or multiple shims in combination to add whatever thickness is required
17.99 USD

Easy to operate, rechargeable extinguishers. Feature integral gauges that indicate whether the extinguisher is ready for use. The B-I models include a metal, USCG-approved bracket. The B-II model requires the Rb-18 metal bracket which can be ordered separately. Type: Portable Activation Method: Manual Disposable or Rechargeable: Rechargeable Extinguishing Agent: Tri-class dry chemical (primarily monoammonium phosphate) USCG Approval: Yes Warranty: 6 years
49.99 USD