lift pump

Navpilot Pump Adjustable Adjustable Flow Autopilot PumpVDC : 241.6-2.9 (For Ram Cylinders Between 26 Cubic Inches and 46 Cubic Inches and / or for Vessels That Need an Adjustable Flow Pump)Sh Wt 25 lbs.
719.99 USD

Replacement Pump Cartridge The SHURflo Piranha cartridge is simple and easy to change. Quiet and tough these cartridges are designed specifically to handle continuous duty expected from your livewell/aerator pump.
19.99 USD

Hand Pump Manufactured from the finest materials available, Sea Bowld Pumps are great for bailing dinghies, livewells, bilges, and other tight spots where water collects. Made with a special polyvinyl body and shaft, they will not rust, corrode, or mar your boat. They are self-priming and very easy to clean. If it ever becomes clogged, simply unscrew the foot valve assembly and clean out the inside.
19.99 USD

Bilge Pump Rule's completely submersible, non-automatic bilge pumps offer good performance at a value price. Designed to be installed in conjunction with a float switch or panel switch, these pumps feature easy clean snap-lock strainer bases, silent, vibrationless operation, anti-airlock protection, stainless steel shafts, and no burn-out when run dry. 12VDC.
34.99 USD

The Sierra 18-7326 Electric Fuel Pump is for 1992-93, fuel injected and carbuerated 4.3L with inline electric pump.
187.99 USD

Sanipump Macerator/Discharge Pump Runs dry without harmThe SeaLand T-Series Pump solves the most serious problem associated with impeller-type macerator pumps - it can run dry without damage. Its patented, bellows pump has no impellers to burn up, and still handles tough marine waste while drawing just 6 amps at 12VDC. The T-Series Pump is self-priming up to 10' feet of water and handles up to 240 GPH. 12V.Sh. Wt. 10 lbs.
309.99 USD

Water Pump Base Fits MC- 1 and R drives without flush screw in housing.
37.99 USD

Automatic Bilge Pump Rule Rule-Mate Series Fully Automatic Pumps contain the pump and the non-mercury float switch in a single, compact housing. As the water level rises, so does the float switch, activating the pump when the water level reaches 2-1/8''. There is no on/off cycling and therefore, no power use until the pump comes on. Features include easy clean snap-lock strainer bases, silent, vibrationless operation, anti-airlock protection, stainless steel shafts, and no burn-out when run dry. 12VDC.
149.99 USD

Reliable, high-capacity pumps for emptying holding tanks, bilges, gray water tanks, etc. Nitrile diaphragms ensure long service life. Offered in Surface-Mount and Universal configurations. Universal design may be surface- or thru-deck mounted and when mounted thru-deck requires Deck Plate with Ring Kit (Model 182438) to complete installation. 16gpm capacity. Use 1.5" hose. Type: Manual Diaphragm, bulkhead or thru-deck models GPM: 14.75 Macerates: No Self-Prime: Yes, max. lift 15 ft. Material: Stainless, bronze, glass-reinforced polypropylene, nitrile diaphragm Port Sizes: 1 1/2" inlet/outlet Dimensions: 18.25"H x 5.5"W x 7.5"D Warranty: Five years
167.99 USD

Reliable, high-capacity pumps for emptying holding tanks, bilges, gray water tanks, etc. Nitrile diaphragms ensure long service life. Offered in Surface-Mount and Universal configurations. Universal design may be surface- or thru-deck mounted and when mounted thru-deck requires Deck Plate with Ring Kit (Model 182438) to complete installation. 16gpm capacity. Use 1.5" hose. Type: Manual Diaphragm, bulkhead or thru-deck models GPM: 14.75 Macerates: No Self-Prime: Yes, max. lift 15 ft. Material: Stainless, bronze, glass-reinforced polypropylene, nitrile diaphragm Port Sizes: 1 1/2" inlet/outlet Dimensions: 18.25"H x 5.5"W x 7.5"D Warranty: Five years
174.99 USD