lightest outboard 9 hp 10 hp

9.8 Horsepower Four-Stroke Outboard Motor - 15'' Shaft Lightest Weight 4-Stroke in its Class and one of the quietest rides on the water. Whether you need auxiliary power, primary power, or a kicker for backup, the Tohatsu 8 and 9.8- HP 4-strokes offer the power, fuel economy, and features you need. A dynamically balanced crankshaft and newly designed upper rubber mounts greatly reduce vibration to ensure smooth, stable running throughout the entire rpm range. The digital CD Ignition system produces quicker ignition timing response at any rpm and conditions, providing faster starts, quicker throttle response, and smoother trolling. A larger capacity air silencer greatly reduces induction noise. The fast-idle choke system on the carburetor eliminates the need for difficult choking techniques and enables simplistic starting, while the newly designed recoil starter has a larger starter reel making manual starting fast and easy. A wider cavitation plate for quicker planning and reduced slash. A sacrificial Anode trim tab on the gear case stabilizes steering torque for any running condition while also helping to protect the engine from electrolysis and corrosion. Geared with Forward, Neutral, and Reverse for convenient operation. 3.1 gallon external fuel tank included.* Please Note: Boats, kayaks, dinghies, canoes, and all gas motors cannot be returned to boatersworld.com. If these products are defective, you will need to contact the manufacturer.
1719.99 USD

Keep your small outboard safe and upright on the stern rail, rather than stowed in a locker where gasoline from the tank could cause hazardous fumes to collect, or spill and ruin stored goods. Two-piece mounting blocks clamp around a 1'' O.D. rail ''T'' Holds outboards up to 8 hp Each comes complete with stainless mounting bolts UV-stabilized polypropylene Measures about 7'' square
29.99 USD

Keep your small outboard safe and upright on the stern rail, rather than stowed in a locker where gasoline from the tank could cause hazardous fumes to collect, or spill and ruin stored goods. Two-piece mounting blocks clamp around a 1'' O.D. rail ''T'' Holds outboards up to 8 hp Each comes complete with stainless mounting bolts UV-stabilized polypropylene Measures about 7'' square
29.99 USD

9'0 HP - With accelerated nose and tail rocker, thinner down rails and hard edges in the tail and pulled in outline The HP is a great high performance board for good juicy-wave performance. LENGTH: 9' 274.32 cm NOSE: 16.625 42.23 cm MID: 21.75 55.24 cm TAIL: 13.375 33.97 cm THICK: 2.75 6.98 cm VOLUME: 63cc FINS: FCS TECHNOLOGY: Wood
1000.00 USD

9'0 RF HP - With accelerated nose and tail rocker, thinner down rails and hard edges in the tail and pulled in outline The HP is a great high performance board for good juicy-wave performance. LENGTH: 9' 274.32 cm NOSE: 16 5/8 40.64 cm MID: 21 3/4 53.34 cm TAIL: 13 3/8 33.02 cm THICK: 2 3/4 5.08 cm VOLUME: 63cc FINS: FCS TECHNOLOGY: Tuflite
900.00 USD

Built to hold motors up to 15 hp or 100 lbs/45 kg The Edson Stern Rail Outboard Motor Mount is built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with nonskid pad, bolted to the UV stable poly backing board always looks shipshape... no more varnishing. Comes complete with hardware to attach to any standard 1'' (2.5cm) stainless rail Bottom cleat comes unattached so that it will fit any rail spacing Warning: Be sure the engine is securely tied onto the backing board and the engine mounts are tightened whenever the engine is stored on Edson's Outboard Motor Mount. Use the tilt feature on the engine to allow the lower unit to rest on the backing plate or add a block of wood to provide this support.
314.99 USD

Prop F/ 5 & 6 Hp 4-Stroke These genuine Tohastu props are exact matches to the prop that came with your Tohatsu outbord motor from the factory. Don't skimp by using an inferior aftermarket prop for those inevitable times when you damage or loose your prop. Ensure the performance you have come to know and trust from your Tohatsu outboard motor by using a genuine,high quality Tohatsu replacement prop.4 HP 4-stroke (short)Size 7.8 x 8Sh Wt 4 lbs.
54.99 USD

SELOC Marine tune-up and repair manuals provide the most comprehensive, authoritative information available for outboard, inboard and stern-drive engines, as well as personal watercraft. SELOC has been the leading source of how-to information for the marine industry since 1974. Designed and written to serve the needs of the professional mechanic, do-it-yourself boat enthusiast, instructor and student, these manuals are based on actual teardowns done by Seloc s editors/authors in our on-site facility. Step-by-step illustrated keyed procedures guide you through every conceivable job possible, including all adjustments necessary. This manual covers all Johnson/Evinrude outboards, 1.25-60 h.p., 1 and 2 cylinders from 1971-1989. Every manual features: Easy-to-follow, step-by-step, illustrated procedures Hundreds of exploded drawings, photographs and tables Troubleshooting sections Accurate specifications and wiring diagrams covers all Gasoline Engines and Drive Systems. Over 1,400 illustrations. Provides skill level ratings on all procedures and Special Tool icons where applicable. Separate chapters cover: general information tools and equipment boating safety engine tune-up engine disassembly and reassembly fuel system ignition system electrical system cooling system drive unit tilt and trim systems engine specs torque specs maintenance and off-season storage wiring diagrams Published by Seloc Publications. Softcover. Books
37.99 USD

Inflatable Boat Cover - 9' 10'' to 10' 6'' Extend the life of your inflatable boat by sheltering it from the effects of dirt, sun, rain and debris. Made from custom-grade 600 denier fabric that is treated to offer the highest degree of water and mildew resistance. Covers fit the entire length of the boat and will accommodate an outboard motor as well. Sewn-in shock cord into the hem allows for easy covering and uncovering. Grey. Made in China. 3-Year Warranty.
99.99 USD

9'6" Four man inflatable fisher/tender. 1000 Denier hull material, quadruple overlap seams Takes up to 8 hp. 3 year warranty
1149.00 USD