mercruiser power steering cylinder

Precise steering control for high-speed outboard boats SeaStar PRO outboard steering systems are the choice for high speed single-engine outboard boats, like bass, flats, combo race/ski and other performance boats with speeds above 65mph. Recommended for single non-power-assisted outboards up to 300hp. SeaStar PRO has steered the Bass Masters Classic since 1994. The easy-to-install Sea Star PRO kit is built using the same components used in factory boatbuilding. The kit includes a 2.0 PRO HH5770 helm, semi-universal front mount HC5345 cylinder, two quarts of oil and an installation guide. Kit can be used with jackplates (allow enough hose length for full steering motion and no interference during trim and tilt) and performance props. Compact helm has a 4 7/16" footprint and requires only a 3" cutout. Match the helm with Kevlar reinforced HO57XX hoses. Meets ABYC standards and NMMA requirements. Horsepower: Single engine 300hp; dual engine 600hp Speed: 60mph + Helm: 2.0 cu.ft. capacity Hose: Kevlar reinforced, 1500PSI Turns Lock-to-Lock: 4.25 Included equipment: Helm pump, cylinder, bleeder kit. Hoses sold separately. (Uses HO57XX series) Steering Wheel: Not included Steering Wheel Shaft: 3/4" tapered Warranty: Two years
249.99 USD

Pivoting replacement hydraulic cylinder for SeaStar and SeaStar Pro steering systems.
629.00 USD

Outboard Cylinders fit most large outboards. Standard side-mount cylinder is an affordable alternative to front mount cylinders. It's easy to install and can be installed in shallow splashwells and on engines fitted with power steering. Can be used with single or twin outboards Extends about 13'' to the right of the motor tilt tube Cannot be used with autopilots since it is an unbalanced cylinder
409.99 USD

A universal hydraulic fluid designed to mix with all hydraulic fluids, protect seals and hoses. Prevents foaming, oxidation and corrosion 8oz Bottle
10.99 USD

A universal hydraulic fluid designed to mix with all hydraulic fluids, protect seals and hoses. Prevents foaming, oxidation and corrosion 8oz Bottle
10.99 USD

Hydraulic steering for outboards to 150hpControlling large outboards with mechanical steering may require lots of effort. On the other hand, traditional hydraulic systems may be more than is needed on lower horsepower engines. BayStar brings safety, reliability and comfort of hydraulic steering to outboard powered boats like inflatable RIBs and runabouts with a maximum 150 HP (total) or less. The super low friction helm pump provides smooth comfortable steering. The balanced cylinder features a compact design that easily fits most splashwells 23" or less. BayStar Kits come complete with everything needed for an install. The cylinder utilizes the factory outboard engine supplied drag link for simplified installation. For your convenience two lengths of 20' cut to fit tubing are supplied (2 x 20' length). Kit includes Helm Pump, Cylinder, Tubing Kit, two bottles of hydraulic steering fluid and one fill tube for easy fill and purge. Boat Type: Single station, single engine boat with outboard up to 150HP. Not for lower-horsepower outboards that use wing nut type transom mount clamping screws Compact helm has only a 5" footprint, and requires only a 3" dash cutout. 4.5 turns lock to lock. Steering Wheel: Not included. Steering Wheel Shaft: 3/4" tapered Included Equipment: Helm pump HH4016, cylinder HC4645H, tubing kit (includes two 20' cut-to-fit hoses), filler kit and two bottles of hydraulic fluid Splashwell: 5"H x 6"D x 21"W minimum Warranty: Two years
749.00 USD

Hydraulic steering for outboards to 150hpControlling large outboards with mechanical steering may require lots of effort. On the other hand, traditional hydraulic systems may be more than is needed on lower horsepower engines. BayStar brings safety, reliability and comfort of hydraulic steering to outboard powered boats like inflatable RIBs and runabouts with a maximum 150 HP (total) or less. The super low friction helm pump provides smooth comfortable steering. The balanced cylinder features a compact design that easily fits most splashwells 23" or less. BayStar Kits come complete with everything needed for an install. The cylinder utilizes the factory outboard engine supplied drag link for simplified installation. For your convenience two lengths of 20' cut to fit tubing are supplied (2 x 20' length). Kit includes Helm Pump, Cylinder, Tubing Kit, two bottles of hydraulic steering fluid and one fill tube for easy fill and purge. Boat Type: Single station, single engine boat with outboard up to 150HP. Not for lower-horsepower outboards that use wing nut type transom mount clamping screws Compact helm has only a 5" footprint, and requires only a 3" dash cutout. 4.5 turns lock to lock. Steering Wheel: Not included. Steering Wheel Shaft: 3/4" tapered Included Equipment: Helm pump HH4016, cylinder HC4645H, tubing kit (includes two 20' cut-to-fit hoses), filler kit and two bottles of hydraulic fluid Splashwell: 5"H x 6"D x 21"W minimum Warranty: Two years
749.00 USD

For Mercruiser Alpha One generation II
32.99 USD

Nfb Rack Steering System It?s no longer necessary to strong arm your boat through a turn. Teleflex has incorporated their patented No Feedback roller clutch mechanism into their precise rack-and-pinion steering system. You don?t have to fight the strong torque produced by today?s high powered outboards. The NFB Rack System was designed to fit the standard Rack system dash cut-out, so upgrading requires no modification. 4 turns lock-to-lock and a standard 3/4" tapered shaft. Fits single, non-power assist outboards. Good for boats up to 24? with wheels up to 16" diameter. Kit comes complete with helm, cable, 90 degree bezel, all necessary instructions.
199.99 USD

Replacement for Mercruiser Inboard/Outboard #32-90949T 3" inside diameter
34.99 USD