mercury 9.5 hp outboard flush kit

Built to hold motors up to 15 hp or 100 lbs/45 kg The Edson Stern Rail Outboard Motor Mount is built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with nonskid pad, bolted to the UV stable poly backing board always looks shipshape... no more varnishing. Comes complete with hardware to attach to any standard 1'' (2.5cm) stainless rail Bottom cleat comes unattached so that it will fit any rail spacing Warning: Be sure the engine is securely tied onto the backing board and the engine mounts are tightened whenever the engine is stored on Edson's Outboard Motor Mount. Use the tilt feature on the engine to allow the lower unit to rest on the backing plate or add a block of wood to provide this support.
314.99 USD

Precise steering control for high-speed outboard boats SeaStar PRO outboard steering systems are the choice for high speed single-engine outboard boats, like bass, flats, combo race/ski and other performance boats with speeds above 65mph. Recommended for single non-power-assisted outboards up to 300hp. SeaStar PRO has steered the Bass Masters Classic since 1994. The easy-to-install Sea Star PRO kit is built using the same components used in factory boatbuilding. The kit includes a 2.0 PRO HH5770 helm, semi-universal front mount HC5345 cylinder, two quarts of oil and an installation guide. Kit can be used with jackplates (allow enough hose length for full steering motion and no interference during trim and tilt) and performance props. Compact helm has a 4 7/16" footprint and requires only a 3" cutout. Match the helm with Kevlar reinforced HO57XX hoses. Meets ABYC standards and NMMA requirements. Horsepower: Single engine 300hp; dual engine 600hp Speed: 60mph + Helm: 2.0 cu.ft. capacity Hose: Kevlar reinforced, 1500PSI Turns Lock-to-Lock: 4.25 Included equipment: Helm pump, cylinder, bleeder kit. Hoses sold separately. (Uses HO57XX series) Steering Wheel: Not included Steering Wheel Shaft: 3/4" tapered Warranty: Two years
199.99 USD

Precise steering control for high-speed outboard boats SeaStar PRO outboard steering systems are the choice for high speed single-engine outboard boats, like bass, flats, combo race/ski and other performance boats with speeds above 65mph. Recommended for single non-power-assisted outboards up to 300hp. SeaStar PRO has steered the Bass Masters Classic since 1994. The easy-to-install Sea Star PRO kit is built using the same components used in factory boatbuilding. The kit includes a 2.0 PRO HH5770 helm, semi-universal front mount HC5345 cylinder, two quarts of oil and an installation guide. Kit can be used with jackplates (allow enough hose length for full steering motion and no interference during trim and tilt) and performance props. Compact helm has a 4 7/16" footprint and requires only a 3" cutout. Match the helm with Kevlar reinforced HO57XX hoses. Meets ABYC standards and NMMA requirements. Horsepower: Single engine 300hp; dual engine 600hp Speed: 60mph + Helm: 2.0 cu.ft. capacity Hose: Kevlar reinforced, 1500PSI Turns Lock-to-Lock: 4.25 Included equipment: Helm pump, cylinder, bleeder kit. Hoses sold separately. (Uses HO57XX series) Steering Wheel: Not included Steering Wheel Shaft: 3/4" tapered Warranty: Two years
214.99 USD

Precise steering control for high-speed outboard boats SeaStar PRO outboard steering systems are the choice for high speed single-engine outboard boats, like bass, flats, combo race/ski and other performance boats with speeds above 65mph. Recommended for single non-power-assisted outboards up to 300hp. SeaStar PRO has steered the Bass Masters Classic since 1994. The easy-to-install Sea Star PRO kit is built using the same components used in factory boatbuilding. The kit includes a 2.0 PRO HH5770 helm, semi-universal front mount HC5345 cylinder, two quarts of oil and an installation guide. Kit can be used with jackplates (allow enough hose length for full steering motion and no interference during trim and tilt) and performance props. Compact helm has a 4 7/16" footprint and requires only a 3" cutout. Match the helm with Kevlar reinforced HO57XX hoses. Meets ABYC standards and NMMA requirements. Horsepower: Single engine 300hp; dual engine 600hp Speed: 60mph + Helm: 2.0 cu.ft. capacity Hose: Kevlar reinforced, 1500PSI Turns Lock-to-Lock: 4.25 Included equipment: Helm pump, cylinder, bleeder kit. Hoses sold separately. (Uses HO57XX series) Steering Wheel: Not included Steering Wheel Shaft: 3/4" tapered Warranty: Two years
199.99 USD

Precise steering control for high-speed outboard boats SeaStar PRO outboard steering systems are the choice for high speed single-engine outboard boats, like bass, flats, combo race/ski and other performance boats with speeds above 65mph. Recommended for single non-power-assisted outboards up to 300hp. SeaStar PRO has steered the Bass Masters Classic since 1994. The easy-to-install Sea Star PRO kit is built using the same components used in factory boatbuilding. The kit includes a 2.0 PRO HH5770 helm, semi-universal front mount HC5345 cylinder, two quarts of oil and an installation guide. Kit can be used with jackplates (allow enough hose length for full steering motion and no interference during trim and tilt) and performance props. Compact helm has a 4 7/16" footprint and requires only a 3" cutout. Match the helm with Kevlar reinforced HO57XX hoses. Meets ABYC standards and NMMA requirements. Horsepower: Single engine 300hp; dual engine 600hp Speed: 60mph + Helm: 2.0 cu.ft. capacity Hose: Kevlar reinforced, 1500PSI Turns Lock-to-Lock: 4.25 Included equipment: Helm pump, cylinder, bleeder kit. Hoses sold separately. (Uses HO57XX series) Steering Wheel: Not included Steering Wheel Shaft: 3/4" tapered Warranty: Two years
214.99 USD

Precise steering control for high-speed outboard boats SeaStar PRO outboard steering systems are the choice for high speed single-engine outboard boats, like bass, flats, combo race/ski and other performance boats with speeds above 65mph. Recommended for single non-power-assisted outboards up to 300hp. SeaStar PRO has steered the Bass Masters Classic since 1994. The easy-to-install Sea Star PRO kit is built using the same components used in factory boatbuilding. The kit includes a 2.0 PRO HH5770 helm, semi-universal front mount HC5345 cylinder, two quarts of oil and an installation guide. Kit can be used with jackplates (allow enough hose length for full steering motion and no interference during trim and tilt) and performance props. Compact helm has a 4 7/16" footprint and requires only a 3" cutout. Match the helm with Kevlar reinforced HO57XX hoses. Meets ABYC standards and NMMA requirements. Horsepower: Single engine 300hp; dual engine 600hp Speed: 60mph + Helm: 2.0 cu.ft. capacity Hose: Kevlar reinforced, 1500PSI Turns Lock-to-Lock: 4.25 Included equipment: Helm pump, cylinder, bleeder kit. Hoses sold separately. (Uses HO57XX series) Steering Wheel: Not included Steering Wheel Shaft: 3/4" tapered Warranty: Two years
274.99 USD

Precise steering control for high-speed outboard boats SeaStar PRO outboard steering systems are the choice for high speed single-engine outboard boats, like bass, flats, combo race/ski and other performance boats with speeds above 65mph. Recommended for single non-power-assisted outboards up to 300hp. SeaStar PRO has steered the Bass Masters Classic since 1994. The easy-to-install Sea Star PRO kit is built using the same components used in factory boatbuilding. The kit includes a 2.0 PRO HH5770 helm, semi-universal front mount HC5345 cylinder, two quarts of oil and an installation guide. Kit can be used with jackplates (allow enough hose length for full steering motion and no interference during trim and tilt) and performance props. Compact helm has a 4 7/16" footprint and requires only a 3" cutout. Match the helm with Kevlar reinforced HO57XX hoses. Meets ABYC standards and NMMA requirements. Horsepower: Single engine 300hp; dual engine 600hp Speed: 60mph + Helm: 2.0 cu.ft. capacity Hose: Kevlar reinforced, 1500PSI Turns Lock-to-Lock: 4.25 Included equipment: Helm pump, cylinder, bleeder kit. Hoses sold separately. (Uses HO57XX series) Steering Wheel: Not included Steering Wheel Shaft: 3/4" tapered Warranty: Two years
229.99 USD

Precise steering control for high-speed outboard boats SeaStar PRO outboard steering systems are the choice for high speed single-engine outboard boats, like bass, flats, combo race/ski and other performance boats with speeds above 65mph. Recommended for single non-power-assisted outboards up to 300hp. SeaStar PRO has steered the Bass Masters Classic since 1994. The easy-to-install Sea Star PRO kit is built using the same components used in factory boatbuilding. The kit includes a 2.0 PRO HH5770 helm, semi-universal front mount HC5345 cylinder, two quarts of oil and an installation guide. Kit can be used with jackplates (allow enough hose length for full steering motion and no interference during trim and tilt) and performance props. Compact helm has a 4 7/16" footprint and requires only a 3" cutout. Match the helm with Kevlar reinforced HO57XX hoses. Meets ABYC standards and NMMA requirements. Horsepower: Single engine 300hp; dual engine 600hp Speed: 60mph + Helm: 2.0 cu.ft. capacity Hose: Kevlar reinforced, 1500PSI Turns Lock-to-Lock: 4.25 Included equipment: Helm pump, cylinder, bleeder kit. Hoses sold separately. (Uses HO57XX series) Steering Wheel: Not included Steering Wheel Shaft: 3/4" tapered Warranty: Two years
294.99 USD

Precise steering control for high-speed outboard boats SeaStar PRO outboard steering systems are the choice for high speed single-engine outboard boats, like bass, flats, combo race/ski and other performance boats with speeds above 65mph. Recommended for single non-power-assisted outboards up to 300hp. SeaStar PRO has steered the Bass Masters Classic since 1994. The easy-to-install Sea Star PRO kit is built using the same components used in factory boatbuilding. The kit includes a 2.0 PRO HH5770 helm, semi-universal front mount HC5345 cylinder, two quarts of oil and an installation guide. Kit can be used with jackplates (allow enough hose length for full steering motion and no interference during trim and tilt) and performance props. Compact helm has a 4 7/16" footprint and requires only a 3" cutout. Match the helm with Kevlar reinforced HO57XX hoses. Meets ABYC standards and NMMA requirements. Horsepower: Single engine 300hp; dual engine 600hp Speed: 60mph + Helm: 2.0 cu.ft. capacity Hose: Kevlar reinforced, 1500PSI Turns Lock-to-Lock: 4.25 Included equipment: Helm pump, cylinder, bleeder kit. Hoses sold separately. (Uses HO57XX series) Steering Wheel: Not included Steering Wheel Shaft: 3/4" tapered Warranty: Two years
249.99 USD

Precise steering control for high-speed outboard boats SeaStar PRO outboard steering systems are the choice for high speed single-engine outboard boats, like bass, flats, combo race/ski and other performance boats with speeds above 65mph. Recommended for single non-power-assisted outboards up to 300hp. SeaStar PRO has steered the Bass Masters Classic since 1994. The easy-to-install Sea Star PRO kit is built using the same components used in factory boatbuilding. The kit includes a 2.0 PRO HH5770 helm, semi-universal front mount HC5345 cylinder, two quarts of oil and an installation guide. Kit can be used with jackplates (allow enough hose length for full steering motion and no interference during trim and tilt) and performance props. Compact helm has a 4 7/16" footprint and requires only a 3" cutout. Match the helm with Kevlar reinforced HO57XX hoses. Meets ABYC standards and NMMA requirements. Horsepower: Single engine 300hp; dual engine 600hp Speed: 60mph + Helm: 2.0 cu.ft. capacity Hose: Kevlar reinforced, 1500PSI Turns Lock-to-Lock: 4.25 Included equipment: Helm pump, cylinder, bleeder kit. Hoses sold separately. (Uses HO57XX series) Steering Wheel: Not included Steering Wheel Shaft: 3/4" tapered Warranty: Two years
274.99 USD