oil tank sounding pipe

Vented Loop Pipe Installing a vented loop will ensure that fluids will not siphon from tank to tank. The simple valve system incorporated in the top of the loop allows air to enter the line when not in use and still effectively seals as water or other fluid passes through.
24.99 USD

Kits include all fittings needed to attach hoses to a water tank. All fittings screw into the tank. The opposite end of the fitting accepts the hose. Teflon tape is supplied for easy installation and to ensure a tight fit. Two 1/2" hose barbs One 1-1/2" hose barb Teflon tape and instructions
15.99 USD

Include all the fittings necessary to attach a water tank to the appropriate hoses (two 1/2" hose barbs and one 1 1/2" hose barb). All fittings screw into the tank; the opposite end of the fitting accepts the hose. Teflon tape is also supplied for ease in installation and to ensure a dry fit.
13.99 USD

Water Tank This rigid water tank is manufactured from roto-molded thick polyethylene, which complies with FDA regulations and Coast Guard standards. Tank has one 1-1/2" openings and one 1/2" vent opening, one 1/2" supply opening; all openings are female National Pipe Thread (NPT), and are molded in to prevent cracking.
89.99 USD

No spills!The Flat Tank Oil Changer eliminates the worry of spilling oil from top-heavy, open-container oil change systems. Featuring a stable, horizontal, enclosed "jerry jug" design, this oil change system is equipped with a self-priming diaphragm pump and an easy-pour spout for emptying. The compact design stows easily in a dock box or locker. Comes equipped with dipstick suction tube, battery clamp leads, and an on/off switch to make the pumping process simpler and easier. Capacity: 3 1/2 gal Dimensions: 19"L x 12 1/2"W x 7 1/2"H Extraction Point: Dipstick probe Hose Length: 8' Power Lead: 6' battery leads with clips Warranty: Three years
139.99 USD

Holding Tank These rigid holding tanks are manufactured from roto-molded thick polyethylene which complies with FDA regulations and Coast Guard standards. Each holding tank has two 1-1/2'' openings and one 1/2'' vent opening; all openings are female National Pipe Thread (NPT), and are molded in to prevent cracking. Extra heavy walls for low odor permeability.
59.99 USD

55 Gal Holding Tank These rigid holding tanks are manufactured from roto-molded thick polyethylene which complies with FDA regulations and Coast Guard standards. Each holding tank has two 1-1/2" openings and one 1/2" vent opening; all openings are female National Pipe Thread (NPT), and are molded in to prevent cracking. Extra heavy walls for low odor permeability.
229.99 USD

TANK LIDBAITUT-13
16.99 USD

FUEL TANK 6.6 GAL
72.99 USD

Inside Corner Pipe Holder These heavy-duty inside corners should be used with one of the outside corners and as an internal pipe holder to be used with either 2" pipe (P/N 26525) or give strength to the dock's frame. Measures 8 1/2"L X 5"H. Requires carriage bolt set (M) for attaching.
44.99 USD