outboard engine mount

Engine Mount Freshwater Engine Mount Trolling Motors Remote Speed Control - Control the speed of your EM motor with a corded remote that can be mounted or handheld. Offers infinitely variable speed control in forward and reverse. Features neutral (Off) detent position. The motor can be steered using the boat steering wheel or outboard tiller. Built-in Maximizer - Up to five times longer run time on a single charge. Maximizer technology controls the draw of power at infinitely variable speeds to eliminate wasted energy and conserve batty power. Less draw means more time on the water. Composite Mounting Bracket - Will not interfere with boat or motor performance. Mounts on cavitation plate of your outboard or I/O lower unit. No stowing or deploying required. Motor is completely out of sight and will keep decks clear and recreational boats from looking like a fishing boat. Once on plane, the EM rides completely out of the water. Sealed and Protected Electronics - EM electronics are housed in a fully waterproof control module mounted below the deck of the boat. All electronics are sealed in marine-grade polyurethane to provide corrosion-proof protection. The extruded aluminum housing features specially designed fins that dissipate heat to keep things cool under high rpm use. Weedless Wedge 2 - The latest generation of this legendary design features swept-back and flared blades to 'wedge' weeds away. Pass through the thick stuff without battery-draining 'chopping and hacking.' A Minn Kota exclusive. 2-Year Warranty - Minn Kota Engine Mount motors feature our two-year warranty. Engine Mount motors are available in 202, 160, 101, 80 and 55 lb thrust levels on 36, 24 and 12 volts.
1449.99 USD

Engine Mount Saltwater Engine Mount Trolling Motors Remote Speed Control - Control the speed of your EM motor with a corded remote that can be mounted or handheld. Offers infinitely variable speed control in forward and reverse. Features neutral (Off) detent position. The motor can be steered using the boat steering wheel or outboard tiller. Built-in Maximizer - Up to five times longer run time on a single charge. Maximizer technology controls the draw of power at infinitely variable speeds to eliminate wasted energy and conserve batty power. Less draw means more time on the water. Composite Mounting Bracket - Will not interfere with boat or motor performance. Mounts on cavitation plate of your outboard or I/O lower unit. No stowing or deploying required. Motor is completely out of sight and will keep decks clear and recreational boats from looking like a fishing boat. Once on plane, the EM rides completely out of the water. Sealed and Protected Electronics - EM electronics are housed in a fully waterproof control module mounted below the deck of the boat. All electronics are sealed in marine-grade polyurethane to provide corrosion-proof protection. The extruded aluminum housing features specially designed fins that dissipate heat to keep things cool under high rpm use. Weedless Wedge 2 - The latest generation of this legendary design features swept-back and flared blades to 'wedge' weeds away. Pass through the thick stuff without battery-draining 'chopping and hacking.' A Minn Kota exclusive. 2-Year Warranty - Minn Kota Engine Mount motors feature our two-year warranty. Engine Mount motors are available in 202, 160, 101, 80 and 55 lb thrust levels on 36, 24 and 12 volts.
1499.99 USD

Precise steering control for high-speed outboard boats SeaStar PRO outboard steering systems are the choice for high speed single-engine outboard boats, like bass, flats, combo race/ski and other performance boats with speeds above 65mph. Recommended for single non-power-assisted outboards up to 300hp. SeaStar PRO has steered the Bass Masters Classic since 1994. The easy-to-install Sea Star PRO kit is built using the same components used in factory boatbuilding. The kit includes a 2.0 PRO HH5770 helm, semi-universal front mount HC5345 cylinder, two quarts of oil and an installation guide. Kit can be used with jackplates (allow enough hose length for full steering motion and no interference during trim and tilt) and performance props. Compact helm has a 4 7/16" footprint and requires only a 3" cutout. Match the helm with Kevlar reinforced HO57XX hoses. Meets ABYC standards and NMMA requirements. Horsepower: Single engine 300hp; dual engine 600hp Speed: 60mph + Helm: 2.0 cu.ft. capacity Hose: Kevlar reinforced, 1500PSI Turns Lock-to-Lock: 4.25 Included equipment: Helm pump, cylinder, bleeder kit. Hoses sold separately. (Uses HO57XX series) Steering Wheel: Not included Steering Wheel Shaft: 3/4" tapered Warranty: Two years
1039.00 USD

Built to hold motors up to 15 hp or 100 lbs/45 kg The Edson Stern Rail Outboard Motor Mount is built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with nonskid pad, bolted to the UV stable poly backing board always looks shipshape... no more varnishing. Comes complete with hardware to attach to any standard 1'' (2.5cm) stainless rail Bottom cleat comes unattached so that it will fit any rail spacing Warning: Be sure the engine is securely tied onto the backing board and the engine mounts are tightened whenever the engine is stored on Edson's Outboard Motor Mount. Use the tilt feature on the engine to allow the lower unit to rest on the backing plate or add a block of wood to provide this support.
289.99 USD

Hydraulic steering for outboards to 150hpControlling large outboards with mechanical steering may require lots of effort. On the other hand, traditional hydraulic systems may be more than is needed on lower horsepower engines. BayStar brings safety, reliability and comfort of hydraulic steering to outboard powered boats like inflatable RIBs and runabouts with a maximum 150 HP (total) or less. The super low friction helm pump provides smooth comfortable steering. The balanced cylinder features a compact design that easily fits most splashwells 23" or less. BayStar Kits come complete with everything needed for an install. The cylinder utilizes the factory outboard engine supplied drag link for simplified installation. For your convenience two lengths of 20' cut to fit tubing are supplied (2 x 20' length). Kit includes Helm Pump, Cylinder, Tubing Kit, two bottles of hydraulic steering fluid and one fill tube for easy fill and purge. Boat Type: Single station, single engine boat with outboard up to 150HP. Not for lower-horsepower outboards that use wing nut type transom mount clamping screws Compact helm has only a 5" footprint, and requires only a 3" dash cutout. 4.5 turns lock to lock. Steering Wheel: Not included. Steering Wheel Shaft: 3/4" tapered Included Equipment: Helm pump HH4016, cylinder HC4645H, tubing kit (includes two 20' cut-to-fit hoses), filler kit and two bottles of hydraulic fluid Splashwell: 5"H x 6"D x 21"W minimum Warranty: Two years
749.00 USD

Easy installation, and made to fit most single/twin outboards A popular choice for unmatched comfort and control of your outboard, this steering system offers smooth and efficient steering for all hull types. Use with single outboards up to 300hp and dual outboards up to 600hp total. The kit contains a smooth front mount 1.7 c.i. displacement helm pump, semi-universal front-mount cylinder, two quarts of oil, bleeder kit and installation guide. Order the popular HK6300 kit complete with set of two 22' hoses, or purchase hoses separately. Your HO51XX hoses are available in even foot lengths. The compact helm has a 4-7/16" footprint and requires a 3" cutout. Meets ABYC standards and NMMA requirements. Maximum Horsepower: Single engine 300hp; dual engine 600hp Speed: 0 60mph Helm: 1.7 cu. ft. capacity Hose: 1,000PSI Turns Lock-to-Lock: 5 Included Equipment: Helm, cylinder and bleeder kit. Hoses (H051 series) sold separately. Steering Wheel: Not included. Steering Wheel Shaft: 3/4" tapered Installation: Tie bar (sold separately) is required for dual engines Warranty: Two years
999.00 USD

Easy installation, and made to fit most single/twin outboards A popular choice for unmatched comfort and control of your outboard, this steering system offers smooth and efficient steering for all hull types. Use with single outboards up to 300hp and dual outboards up to 600hp total. The kit contains a smooth front mount 1.7 c.i. displacement helm pump, semi-universal front-mount cylinder, two quarts of oil, bleeder kit and installation guide. Order the popular HK6300 kit complete with set of two 22' hoses, or purchase hoses separately. Your HO51XX hoses are available in even foot lengths. The compact helm has a 4-7/16" footprint and requires a 3" cutout. Meets ABYC standards and NMMA requirements. Maximum Horsepower: Single engine 300hp; dual engine 600hp Speed: 0 60mph Helm: 1.7 cu. ft. capacity Hose: 1,000PSI Turns Lock-to-Lock: 5 Included Equipment: Helm, cylinder and bleeder kit. Hoses (H051 series) sold separately. Steering Wheel: Not included. Steering Wheel Shaft: 3/4" tapered Installation: Tie bar (sold separately) is required for dual engines Warranty: Two years
979.00 USD

Keep engine centered during traileringHelps keep engine centered during trailering. Snaps over outboard's hydraulic steering and cylinder rods Fits most cylinder rods on engines manufactured in 1997 and later
11.99 USD

The Outboard Lock bolts through your transom to secure the engine and bracket, using Stern Lock's patented stainless steel locking pin mechanism. Helps lower insurance premiums and deters potential thieves Fits all major outboard brands
29.66 USD

The Outboard Lock bolts through your transom to secure the engine and bracket, using Stern Lock's patented stainless steel locking pin mechanism. Helps lower insurance premiums and deters potential thieves Fits all major outboard brands
19.55 USD