outboard mounting bracket

SBM 12V Electric Motor 12V electric trolling motor for small boats. Exclusive Sevylor design. Patented mounting will fit all Sevylor inflatables designed to take an outboard motor. No need for clamp. Can be adapted to other inflatables and rigid boats. For all Sevylor boats XR56 and up 12 lbs. thrust
3.29 USD

For low horsepower outboard engines used in small boats and PWC. Easily installed in-line with the fuel hose. Filter has an anodized mounting head with water repelling aquabloc 10 micron element Can handle a flow rate up to 25 gph 3.25" x 4.25"
79.99 USD

Mounting Bracket for Garmin 76 Series Handheld GPS Units Free up your hands to drive the boat, fish, or just enjoy your time on the water. This adjustable marine mount swivels and tilts for optimum viewing and has a locking mechanism to keep unit secure. Accepts optional external power adapter for quick connection to a DC power supply.
29.99 USD

Built extra-tough and extra-wide for secondary motors including new higher-torque, 4-stroke motors (not for continuous motoring applications). Stainless torsion springs for easy lifting Mounting board is sturdy, corrosion-resistant black poly and is rated for long or short shaft motors to 30 hp. and 169 lb Safety cable for added protection Five-position lock bar allows for better range trim adjustment 9 1/2'' vertical lift Mounting plate measures 8 1/8''W x 9''H x 2''D
294.99 USD

409 Antenna Mounting Kit Combines the versatile Style 407 Heavy-duty Swivel Mount with the Shakespeare Style 408 Insulated Stand-off Bracket. The bracket features an insert to accept 1in or 1?in diameter antennas or extension masts. Now includes a new 1 1 /8 " insert! Mounting hardware sold seperately (see Style 412)
69.99 USD

Tiller Brackets Mounts the activating rod above or below the tiller, measured in vertical distance from the tiller. Use 4" or 5" Heavy Duty Brackets for ST2000+/ST4000+/ST4000+GP Push-Rod Extensions For tiller models. Screws into end of the standard push rod. Two can be screwed together if extra length is required. Pedestal Raises the height of mounting positions for tiller models. Unscrews from bare plate when not in use to allow clear working space. Includes bolts, washers, and locking plate. Aluminum. Drive Belts For wheel-steering autopilots Check your owner's manual for proper offset and adjustments required.
32.99 USD

Tiller Brackets Mounts the activating rod above or below the tiller, measured in vertical distance from the tiller. Use 4" or 5" Heavy Duty Brackets for ST2000+/ST4000+/ST4000+GP Push-Rod Extensions For tiller models. Screws into end of the standard push rod. Two can be screwed together if extra length is required. Pedestal Raises the height of mounting positions for tiller models. Unscrews from bare plate when not in use to allow clear working space. Includes bolts, washers, and locking plate. Aluminum. Drive Belts For wheel-steering autopilots Check your owner's manual for proper offset and adjustments required. Home Improvement
34.99 USD

Shown with Sealink receptacle (sold separately) installed Bracket for under dash mounting of the SeaLink or ConnectPro receptacles Receptacle installs with rear mounting threaded nut Marine grade anodized aluminum Dimensions: 2 inches W x 2-1/2 inches H
11.99 USD

408 Upper Support Bracket Insulated standoff bracket that's made from a white UV protected plastic. It's easy to open for quick lay down. Can be used with 1'' or 1 1/2'' antennas or extensions. Includes mounting hardware.
14.99 USD

Built to hold motors up to 15 hp or 100 lbs/45 kg The Edson Stern Rail Outboard Motor Mount is built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with nonskid pad, bolted to the UV stable poly backing board always looks shipshape... no more varnishing. Comes complete with hardware to attach to any standard 1'' (2.5cm) stainless rail Bottom cleat comes unattached so that it will fit any rail spacing Warning: Be sure the engine is securely tied onto the backing board and the engine mounts are tightened whenever the engine is stored on Edson's Outboard Motor Mount. Use the tilt feature on the engine to allow the lower unit to rest on the backing plate or add a block of wood to provide this support.
289.99 USD