http://cas-yachts.com/aos/paint_vinyl/ cas-yachts.com/aos results for paint vinyl. Compare products and prices in many shops at once. 2083 1 10 Thu, 04 Dec 2008 03:51:55 +0100 Thu, 04 Dec 2008 03:51:55 +0100 en info@cas-yachts.com AOS RSS Generator (http://automaticonlineshop.com) http://cas-yachts.com/aos/openeurl/page1/8453541/ http://cas-yachts.com/aos/openeurl/page1/8453541/ paint vinyl Inflatable Boat Bottom Paint Flexible water-based vinyl antifouling coating contains 26.37% cuprous oxide for maximum protection against barnacles and other marine growth in fresh and salt water. Use on Hypalon, PVC, rubber, and fiberglass or wooden dingies. Once cured, inflatables can be deflated and rolled without cracking the coating. Apply with brush or roller, and clean up with water. One quart is enough for two coats on an 8-10' boat. Black. Thu, 04 Dec 2008 03:51:54 +0100 http://cas-yachts.com/aos/openeurl/page1/8453542/ http://cas-yachts.com/aos/openeurl/page1/8453542/ paint vinyl Self-etching primer promotes adhesion of paint to metal Promotes adhesion of paint to metal. Two-part zinc chromate, vinyl butyral self-etching primer. Must be thinned with Interlux 355 Thinner. Do not apply more than one coat. Two-part kit makes one quart. Primary Usage: Metal conditioner prior to application of other paints Formulation: Self-etching two-part zinc- chromate vinyl butyral Applies Over: Clean bare metal Drying Time: To touch: 30 min; to overcoat: window of 1 to 24 hrs. max. Number of Coats Recommended: Do not apply more than one coat Thinner: 355 Vinyl-Lux Solvent, Model 117960, 25% min. 30% max. Coverage: Brush: 106sq.ft./qt.; Spray: 85sq.ft./qt. Color: Yellow Thu, 04 Dec 2008 03:51:54 +0100 http://cas-yachts.com/aos/openeurl/page1/8453543/ http://cas-yachts.com/aos/openeurl/page1/8453543/ paint vinyl Primer Epoxy 3000KIT/1CA PRIMER EPOXY 3000/1 CAN Thu, 04 Dec 2008 03:51:54 +0100 http://cas-yachts.com/aos/openeurl/page1/8453544/ http://cas-yachts.com/aos/openeurl/page1/8453544/ paint vinyl Used by performance boatsVC Offshore combines superior antifouling performance with a super smooth low friction surface for the performance conscious boater. This high-strength, vinyl antifouling paint, fortified with Teflon yields a hard, very smooth finish for maximum durability, reduced friction and increased performance. High copper loading fights fouling on performance boats in saltwater. Teflon not only helps reduce drag but also makes it easier to wet sand and burnish to make it even smoother. For use on fiberglass, wood and primed underwater metals (except aluminum). Can be used in fresh, salt and brackish waters. Should not be applied over non-vinyl bottom paints. Type: Hard vinyl Recommended Usage: Fresh or salt water, year-round immersion, racing boats; fiberglass, wood and steel hulls Biocide: 42% Cuprous oxide Additives: Teflon Number of Coats Recommended: Three/four Coverage: 87sq.ft./qt; 350sq.ft./gal. Drying Time: To touch: 1 to 3 hrs.; overcoating: 4 to 12 hrs.; to launch: 8 to 16 hrs. Thinner: 355 Vinyl-Lux Solvent, Model 117960 Not for sale within California Thu, 04 Dec 2008 03:51:54 +0100 http://cas-yachts.com/aos/openeurl/page1/8453545/ http://cas-yachts.com/aos/openeurl/page1/8453545/ paint vinyl Used by performance boatsVC Offshore combines superior antifouling performance with a super smooth low friction surface for the performance conscious boater. This high-strength, vinyl antifouling paint, fortified with Teflon yields a hard, very smooth finish for maximum durability, reduced friction and increased performance. High copper loading fights fouling on performance boats in saltwater. Teflon not only helps reduce drag but also makes it easier to wet sand and burnish to make it even smoother. For use on fiberglass, wood and primed underwater metals (except aluminum). Can be used in fresh, salt and brackish waters. Should not be applied over non-vinyl bottom paints. Type: Hard vinyl Recommended Usage: Fresh or salt water, year-round immersion, racing boats; fiberglass, wood and steel hulls Biocide: 42% Cuprous oxide Additives: Teflon Number of Coats Recommended: Three/four Coverage: 87sq.ft./qt; 350sq.ft./gal. Drying Time: To touch: 1 to 3 hrs.; overcoating: 4 to 12 hrs.; to launch: 8 to 16 hrs. Thinner: 355 Vinyl-Lux Solvent, Model 117960 Not for sale within California Thu, 04 Dec 2008 03:51:54 +0100 http://cas-yachts.com/aos/openeurl/page1/8453546/ http://cas-yachts.com/aos/openeurl/page1/8453546/ paint vinyl Used by performance boatsVC Offshore combines superior antifouling performance with a super smooth low friction surface for the performance conscious boater. This high-strength, vinyl antifouling paint, fortified with Teflon yields a hard, very smooth finish for maximum durability, reduced friction and increased performance. High copper loading fights fouling on performance boats in saltwater. Teflon not only helps reduce drag but also makes it easier to wet sand and burnish to make it even smoother. For use on fiberglass, wood and primed underwater metals (except aluminum). Can be used in fresh, salt and brackish waters. Should not be applied over non-vinyl bottom paints. Type: Hard vinyl Recommended Usage: Fresh or salt water, year-round immersion, racing boats; fiberglass, wood and steel hulls Biocide: 42% Cuprous oxide Additives: Teflon Number of Coats Recommended: Three/four Coverage: 87sq.ft./qt; 350sq.ft./gal. Drying Time: To touch: 1 to 3 hrs.; overcoating: 4 to 12 hrs.; to launch: 8 to 16 hrs. Thinner: 355 Vinyl-Lux Solvent, Model 117960 Not for sale within California Thu, 04 Dec 2008 03:51:54 +0100 http://cas-yachts.com/aos/openeurl/page1/8453547/ http://cas-yachts.com/aos/openeurl/page1/8453547/ paint vinyl Used by performance boatsVC Offshore combines superior antifouling performance with a super smooth low friction surface for the performance conscious boater. This high-strength, vinyl antifouling paint, fortified with Teflon yields a hard, very smooth finish for maximum durability, reduced friction and increased performance. High copper loading fights fouling on performance boats in saltwater. Teflon not only helps reduce drag but also makes it easier to wet sand and burnish to make it even smoother. For use on fiberglass, wood and primed underwater metals (except aluminum). Can be used in fresh, salt and brackish waters. Should not be applied over non-vinyl bottom paints. Type: Hard vinyl Recommended Usage: Fresh or salt water, year-round immersion, racing boats; fiberglass, wood and steel hulls Biocide: 42% Cuprous oxide Additives: Teflon Number of Coats Recommended: Three/four Coverage: 87sq.ft./qt; 350sq.ft./gal. Drying Time: To touch: 1 to 3 hrs.; overcoating: 4 to 12 hrs.; to launch: 8 to 16 hrs. Thinner: 355 Vinyl-Lux Solvent, Model 117960 Not for sale within California Thu, 04 Dec 2008 03:51:54 +0100 http://cas-yachts.com/aos/openeurl/page1/8453548/ http://cas-yachts.com/aos/openeurl/page1/8453548/ paint vinyl Used by performance boatsVC Offshore combines superior antifouling performance with a super smooth low friction surface for the performance conscious boater. This high-strength, vinyl antifouling paint, fortified with Teflon yields a hard, very smooth finish for maximum durability, reduced friction and increased performance. High copper loading fights fouling on performance boats in saltwater. Teflon not only helps reduce drag but also makes it easier to wet sand and burnish to make it even smoother. For use on fiberglass, wood and primed underwater metals (except aluminum). Can be used in fresh, salt and brackish waters. Should not be applied over non-vinyl bottom paints. Type: Hard vinyl Recommended Usage: Fresh or salt water, year-round immersion, racing boats; fiberglass, wood and steel hulls Biocide: 42% Cuprous oxide Additives: Teflon Number of Coats Recommended: Three/four Coverage: 87sq.ft./qt; 350sq.ft./gal. Drying Time: To touch: 1 to 3 hrs.; overcoating: 4 to 12 hrs.; to launch: 8 to 16 hrs. Thinner: 355 Vinyl-Lux Solvent, Model 117960 Not for sale within California Thu, 04 Dec 2008 03:51:54 +0100 http://cas-yachts.com/aos/openeurl/page1/8453549/ http://cas-yachts.com/aos/openeurl/page1/8453549/ paint vinyl Used by performance boatsVC Offshore combines superior antifouling performance with a super smooth low friction surface for the performance conscious boater. This high-strength, vinyl antifouling paint, fortified with Teflon yields a hard, very smooth finish for maximum durability, reduced friction and increased performance. High copper loading fights fouling on performance boats in saltwater. Teflon not only helps reduce drag but also makes it easier to wet sand and burnish to make it even smoother. For use on fiberglass, wood and primed underwater metals (except aluminum). Can be used in fresh, salt and brackish waters. Should not be applied over non-vinyl bottom paints. Type: Hard vinyl Recommended Usage: Fresh or salt water, year-round immersion, racing boats; fiberglass, wood and steel hulls Biocide: 42% Cuprous oxide Additives: Teflon Number of Coats Recommended: Three/four Coverage: 87sq.ft./qt; 350sq.ft./gal. Drying Time: To touch: 1 to 3 hrs.; overcoating: 4 to 12 hrs.; to launch: 8 to 16 hrs. Thinner: 355 Vinyl-Lux Solvent, Model 117960 Not for sale within California Thu, 04 Dec 2008 03:51:55 +0100 http://cas-yachts.com/aos/openeurl/page1/8453550/ http://cas-yachts.com/aos/openeurl/page1/8453550/ paint vinyl Mineral spirits for thinning oil-based paint and for painting cleanups. Thu, 04 Dec 2008 03:51:55 +0100