power generator geko

Air X 400 Watt Wind generator The AIR X marine is capable of supplying power for: - Refrigeration - Auto-pilot - Water maker - Lights - Navigational equipment - Communication equipmentWith only two moving parts, the AIR X marine is simple to install, easy to use and requires no maintenance. Another patented feature allows the AIR X marine to quietly produce maximum output and then slow the blades to eliminate flutter noise. In just a few years, the AIR X marine has become the standard wind turbine among blue water cruisers selling over 70,000 turbines worldwide. AIR X marine is the first of the new generations of small wind turbines. The onboard microprocessor actually monitors wind speed and optimizes output using an exclusive Peak Power Tracking feature.
799.99 USD

AS-Gar205 Hand-Held GPS Connection Kit for Garmin eTrex/Geko Access advanced GPS, trackplotting, and navigation capabilities built into your Fishing System by using your hand-held GPS or other NMEA device.AS-GAR205Garmin eTrex/Gekko Cable Sh. Wt. 2 lbs.
39.99 USD

Generator Control Panel Generator panel is designed to be used with most diesel and gas generators. The solenoid switch can safely breaker a single-phase 30amp generator or shoreline. Recognized and csa approved, 30a rotary switch, dpdtSh. Wt.2 lbs.5.56w x 7.56h x 3.5d.
139.99 USD

This new CO detec tor by Xintex combines the CO Sentinel Carbon Monoxide Detector with generator shutdown protection and multiple location warning taking CO detection and safety to the next level. Not only does the CO Sentinel Carbon Monoxide Detector warn you when dangerous CO fumes are detected it also causes all other connected Sentinel CO detectors to sound alarms and shuts down your connected generators. The CO Sentinel uss a microprocessor to measure accumalted Co levels. The computerized alarm uses a time-weighted average that doesn't react prematurely to brief and concetrated, yet harmless whiffs of CO, but knows to alert you in time of the cumulative effect of low concentrations. The circuit is coated on both sides for added protection in the harsh marin enviorment. Operates on 12V DC. Meets UL 2034 Specs. Types of Vapor Monitored: Carbon Monoxide Alarms: 85dB audible horn and red alarm light Minimum Vapor Level for Activation: 10% COHb Monitoring Algorithm: Time-weighted average Display Size: 4.25"L x 2.75"W x 1.75"D Controls: Test & Mute Buttons Power Requirements: 12V DC Sensors Required/Included: Built-in Sensors Monitored: One internal sensor Case Dimensions: 4.25"L x 2.75"W Mounting Hardware Included/Required: Included Wiring Hardware Included: Yes
159.99 USD

Portable Mounting Bracket - for Geko, 76, 176 & Streetpilot Series GPS Units This portable, adjustable mount is ideal for contoured dashes or for use in rental cars or any situation where you don't want to permanently mount your GPS. Just slide the unit into the center mounting mechanism, rotate for best viewing angle and lock into place. Requires automotive mounting adapter, Catalog #:319617874.
29.99 USD

Improved energy capture in low windsThe latest evolution in small wind turbines, the AIR-X Marine uses a microprocessor to control the RPM and to provide pulse-width modulating (PWM) control for optimal battery charging. The result is a much quieter, more efficient, and a better battery charging routine. AIR-X electronics are programmed to charge the battery at different charging rates, from bulk charging (high amps), taper charging (moderate amps, high voltage) to float charge (low amps, moderate voltage). AIR-X's programmed charged control system is also excellent for newer boat power systems using more advanced batteries which require more sensitive charge management. The PWM control provided by the microprocessor allows battery charging to begin at 500 RPM as compared to the 850 RPM in previous AIR turbines. This enables improved energy capture in low winds (7 - 12 mph). Charge Output: 33.3A@28mph Min. Windspeed: 7mph Overspeed Protection: Auto-brake protection, high wind speed mode Output Regulation: Internal PWM microprocessor, multi-stage charging Blade Span: 46" Blade Material: Carbon fiber composite Case Material: Aluminum Case Dimensions: 26.6"L x 11.25"H Weight: 13lb. Wiring Hardware Included/Required: Wires, stop switch, slow-blow fuse, battery (sold separately) Mounting Hardware Included/Required: Mounting pole, mounting kit and sound absorbers (sold separately) Warranty: Three years
799.00 USD

Improved energy capture in low windsThe latest evolution in small wind turbines, the AIR-X Marine uses a microprocessor to control the RPM and to provide pulse-width modulating (PWM) control for optimal battery charging. The result is a much quieter, more efficient, and a better battery charging routine. AIR-X electronics are programmed to charge the battery at different charging rates, from bulk charging (high amps), taper charging (moderate amps, high voltage) to float charge (low amps, moderate voltage). AIR-X's programmed charged control system is also excellent for newer boat power systems using more advanced batteries which require more sensitive charge management. The PWM control provided by the microprocessor allows battery charging to begin at 500 RPM as compared to the 850 RPM in previous AIR turbines. This enables improved energy capture in low winds (7 - 12 mph). Charge Output: 33.3A@28mph Min. Windspeed: 7mph Overspeed Protection: Auto-brake protection, high wind speed mode Output Regulation: Internal PWM microprocessor, multi-stage charging Blade Span: 46" Blade Material: Carbon fiber composite Case Material: Aluminum Case Dimensions: 26.6"L x 11.25"H Weight: 13lb. Wiring Hardware Included/Required: Wires, stop switch, slow-blow fuse, battery (sold separately) Mounting Hardware Included/Required: Mounting pole, mounting kit and sound absorbers (sold separately) Warranty: Three years
142.99 USD

Improved energy capture in low windsThe latest evolution in small wind turbines, the AIR-X Marine uses a microprocessor to control the RPM and to provide pulse-width modulating (PWM) control for optimal battery charging. The result is a much quieter, more efficient, and a better battery charging routine. AIR-X electronics are programmed to charge the battery at different charging rates, from bulk charging (high amps), taper charging (moderate amps, high voltage) to float charge (low amps, moderate voltage). AIR-X's programmed charged control system is also excellent for newer boat power systems using more advanced batteries which require more sensitive charge management. The PWM control provided by the microprocessor allows battery charging to begin at 500 RPM as compared to the 850 RPM in previous AIR turbines. This enables improved energy capture in low winds (7 - 12 mph). Charge Output: 33.3A@28mph Min. Windspeed: 7mph Overspeed Protection: Auto-brake protection, high wind speed mode Output Regulation: Internal PWM microprocessor, multi-stage charging Blade Span: 46" Blade Material: Carbon fiber composite Case Material: Aluminum Case Dimensions: 26.6"L x 11.25"H Weight: 13lb. Wiring Hardware Included/Required: Wires, stop switch, slow-blow fuse, battery (sold separately) Mounting Hardware Included/Required: Mounting pole, mounting kit and sound absorbers (sold separately) Warranty: Three years
142.99 USD

Improved energy capture in low windsThe latest evolution in small wind turbines, the AIR-X Marine uses a microprocessor to control the RPM and to provide pulse-width modulating (PWM) control for optimal battery charging. The result is a much quieter, more efficient, and a better battery charging routine. AIR-X electronics are programmed to charge the battery at different charging rates, from bulk charging (high amps), taper charging (moderate amps, high voltage) to float charge (low amps, moderate voltage). AIR-X's programmed charged control system is also excellent for newer boat power systems using more advanced batteries which require more sensitive charge management. The PWM control provided by the microprocessor allows battery charging to begin at 500 RPM as compared to the 850 RPM in previous AIR turbines. This enables improved energy capture in low winds (7 - 12 mph). Charge Output: 33.3A@28mph Min. Windspeed: 7mph Overspeed Protection: Auto-brake protection, high wind speed mode Output Regulation: Internal PWM microprocessor, multi-stage charging Blade Span: 46" Blade Material: Carbon fiber composite Case Material: Aluminum Case Dimensions: 26.6"L x 11.25"H Weight: 13lb. Wiring Hardware Included/Required: Wires, stop switch, slow-blow fuse, battery (sold separately) Mounting Hardware Included/Required: Mounting pole, mounting kit and sound absorbers (sold separately) Warranty: Three years
799.00 USD

AGS works in conjunction with the MS2000 Inverter/Charger, Xantrex System Control Panel and your generator to ensure your house batteries always remain charged. The AGS can start your generator based on battery voltage, state of battery charge, or thermostat level. Programmable quiet times ensure the AGS does not start your generator at inappropriate timesLEDs display AGS status. 3.8"H x 5.8"W x 1.5"D
199.99 USD