rail mount cup holders

Maximize on-board rod storage with this transom-mount rod rackIt mounts directly on the transom, thus freeing up gunwales and decks, while providing storage for up to three rods. Durable brushed aluminum finish is designed to withstand the rigors of prolonged use in saltwater conditions. Patent-pending spline technology lets you lock in the desired angle for the rack, which can be adjusted during easy, bolt-down installation to fit the boat s transom. Three-year warranty.
159.99 USD

Built to hold motors up to 15 hp or 100 lbs/45 kg The Edson Stern Rail Outboard Motor Mount is built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with nonskid pad, bolted to the UV stable poly backing board always looks shipshape... no more varnishing. Comes complete with hardware to attach to any standard 1'' (2.5cm) stainless rail Bottom cleat comes unattached so that it will fit any rail spacing Warning: Be sure the engine is securely tied onto the backing board and the engine mounts are tightened whenever the engine is stored on Edson's Outboard Motor Mount. Use the tilt feature on the engine to allow the lower unit to rest on the backing plate or add a block of wood to provide this support.
289.99 USD

No-nonsense rod holders stand up to whatever you, Mother Nature or the Big One can dish out!Crafted from cast heavy 316 stainless-steel heads and 300 series stainless steel tube with heavy white vinyl liners to protect your rod butts. Dimensions: Standard Head 3.28" x 4.06"; 9"L x 2"OD, 1.673 ID. Large: Head 3.85" x 4.88"; 12"L x 2.5"OD; 1.673 ID Dimensions: Large Head 3.85" x 4.88"; 12"L x 2.5"OD; 1.673 ID
92.99 USD

No-nonsense rod holders stand up to whatever you, Mother Nature or the Big One can dish out!Crafted from cast heavy 316 stainless-steel heads and 300 series stainless steel tube with heavy white vinyl liners to protect your rod butts. Dimensions: Standard Head 3.28" x 4.06"; 9"L x 2"OD, 1.673 ID. Large: Head 3.85" x 4.88"; 12"L x 2.5"OD; 1.673 ID Dimensions: Large Head 3.85" x 4.88"; 12"L x 2.5"OD; 1.673 ID
92.99 USD

No-nonsense rod holders stand up to whatever you, Mother Nature or the Big One can dish out!Crafted from cast heavy 316 stainless-steel heads and 300 series stainless steel tube with heavy white vinyl liners to protect your rod butts. Dimensions: Standard Head 3.28" x 4.06"; 9"L x 2"OD, 1.673 ID. Large: Head 3.85" x 4.88"; 12"L x 2.5"OD; 1.673 ID Dimensions: Large Head 3.85" x 4.88"; 12"L x 2.5"OD; 1.673 ID
59.99 USD

We sell our barbecues without mounts so you can select a mount to meet your needs. We recommend that you also purchase a dock-stand (model 6816698) so you can use the barbecue on land or onboard
20.77 USD

Designed for quick release and easy laydown. Easily mounts to 7/8 and 1 horizontal or vertical rails. 9/32 hole for cable feed-through. Standard 1 -14 thread. Heavy duty stainless steel mount holds antennas up to 8 L. Model 4188-SL. Ship 2 lbs.
69.99 USD

Corrosion-proof, flush-mount drink holders with four drain holes in the bottom. Standard size - 3 1/2" Flange 2 7/8" Depth Super size - 4 3/8" Flange 3 1/4" Depth
6.79 USD

Corrosion-proof, flush-mount drink holders with four drain holes in the bottom. Standard size - 3 1/2" Flange 2 7/8" Depth Super size - 4 3/8" Flange 3 1/4" Depth
6.79 USD

Suction Cup Transducer Adapter Using your GARMIN fishfinder as a portable unit? You'll need this adapter, which allows you to stick a transom mount transducer to the side of a boat.
5.99 USD