Kunden Log-In
|
Your search for 'raymarine sensor bracket' generated 983 results  Page 1 / 99
Choose accessories to enhance your Sailcomp 103 Sensor mounting bracket Mast bracket for display Remote repeater Sensor bracket for Maxi 25' sensor extension cable
33.99 USD
1000 Watt High Performance bronze through hull transducer with temperature. (B258) Fairing block included
219.99 USD
Tiller Brackets Mounts the activating rod above or below the tiller, measured in vertical distance from the tiller. Use 4" or 5" Heavy Duty Brackets for ST2000+/ST4000+/ST4000+GP Push-Rod Extensions For tiller models. Screws into end of the standard push rod. Two can be screwed together if extra length is required. Pedestal Raises the height of mounting positions for tiller models. Unscrews from bare plate when not in use to allow clear working space. Includes bolts, washers, and locking plate. Aluminum. Drive Belts For wheel-steering autopilots Check your owner's manual for proper offset and adjustments required.
34.99 USD
Tiller Brackets Mounts the activating rod above or below the tiller, measured in vertical distance from the tiller. Use 4" or 5" Heavy Duty Brackets for ST2000+/ST4000+/ST4000+GP Push-Rod Extensions For tiller models. Screws into end of the standard push rod. Two can be screwed together if extra length is required. Pedestal Raises the height of mounting positions for tiller models. Unscrews from bare plate when not in use to allow clear working space. Includes bolts, washers, and locking plate. Aluminum. Drive Belts For wheel-steering autopilots Check your owner's manual for proper offset and adjustments required. Home Improvement
34.99 USD
Tiller Brackets Mounts the activating rod above or below the tiller, measured in vertical distance from the tiller. Use 4" or 5" Heavy Duty Brackets for ST2000+/ST4000+/ST4000+GP Push-Rod Extensions For tiller models. Screws into end of the standard push rod. Two can be screwed together if extra length is required. Pedestal Raises the height of mounting positions for tiller models. Unscrews from bare plate when not in use to allow clear working space. Includes bolts, washers, and locking plate. Aluminum. Drive Belts For wheel-steering autopilots Check your owner's manual for proper offset and adjustments required.
34.99 USD
The Gryo Plus 2 is similar to the Smart Heading System, but does not include the fluxgate compass. For use when a RayMarine (Autohelm) autopilot is already onboard
679.99 USD
Choose accessories to enhance your Sailcomp 103 Sensor mounting bracket Mast bracket for display Remote repeater Sensor bracket for Maxi 25' sensor extension cable
19.66 USD
Replacement fluxgate compass module for Raymarine autopilots and instruments. Unrivaled for sensitivity and accuracy, this is the compass used on all Autohelm autopilots. Originally supplied with all autopilot core packs, compass instruments, SportPilot, and SmartPilot systems. Includes 30 foot connection cable and stainless, non-magnetic mount
179.99 USD
$30 Mail-In Rebate Download Rebate Form (PDF) Connects to all Raymarine SeaTalk-compatible devices 12-channel satellite differential (WAAS) GPS antenna and receiver is packed into one self-contained unit that measures 3.8"dia. x 1.2"H (only 1"H when flush-mounted) and delivers accuracies in the 3 meter range. Designed to connect to Raymarine's family of SeaTalk compatible instruments, radars, sonars and chartplotters. Low profile case mounts anywhere on a rail, a pole or flush on deck. The Raystar 125 is also compatible with any NMEA 0183 protocol system. Easy installation using a removable cable and connector at the antenna base. Standard 1" thread pole mounting. Built-in LED diagnostic indicator. Time to first fix: 15 30 seconds. Multifunction Network Diagram Application: Provides GPS input for E-Series, C-Series and hsb2 SeaTalk and SeaTalk networks Receiver Type: 12 channel satellite differential (WAAS) GPS, self-contained antenna and receiver 3-13/16"dia.; height varies with mount (sold separately) Mount: Pole or flush, 1" x 14 threads Includes removable cable and connector at the antenna base Dimensions: 9.5" x 6.6" x 3.2" Waterproof: Manufacturer-rated waterproof (CFR46) Warranty: Two years
299.99 USD
Powermount AFT for Raymarine Radars Constructed of high quality Marine Grade Aluminum using a stylish oval strut Anodized and Powder Coated Brilliant White 20 degree Aft leaning profile All models accept our universal 1" Dia. aluminum light bar "LTB" (sold separately) Accepts the Hinge Adapter, Wedge, GPS/light and Floodlight Accessories Waterproof radar cable gland
259.99 USD
|