rocker switch illuminated 3 screw terminals

These rocker swithces come in several different configurations for panel mounting, and available in illuminated non-illuminated versions. Features non-glare black matte plastic housings, bezel, and actuator Brass screw or blade terminals, and gasket sealed housings MOM denotes momentary switch setting Snap-in mounting in panels from 0.93" (2.36mm) to .187" (4.75mm) thick Fits in panel cutout 0.830" x 1.45" Electrical Rating: 25 amps at 12VDC
16.99 USD

These rocker swithces come in several different configurations for panel mounting, and available in illuminated non-illuminated versions. Features non-glare black matte plastic housings, bezel, and actuator Brass screw or blade terminals, and gasket sealed housings MOM denotes momentary switch setting Snap-in mounting in panels from 0.93" (2.36mm) to .187" (4.75mm) thick Fits in panel cutout 0.830" x 1.45" Electrical Rating: 25 amps at 12VDC
14.99 USD

These rocker swithces come in several different configurations for panel mounting, and available in illuminated non-illuminated versions. Features non-glare black matte plastic housings, bezel, and actuator Brass screw or blade terminals, and gasket sealed housings MOM denotes momentary switch setting Snap-in mounting in panels from 0.93" (2.36mm) to .187" (4.75mm) thick Fits in panel cutout 0.830" x 1.45" Electrical Rating: 25 amps at 12VDC
16.99 USD

Back covers for illuminated 12V switch panels
1.99 USD

Illuminated Rocker Switch - w/ 4 snap-in colored lensesSPST Off-On Dependent Pilot Light 25 amp load @ 12v DC. Silver contacts, brass blade terminals, a sealed black plastic housing, bezel and actuator make these switches weather resistant. Supplied with 1 each amber, clear, red and green lens. Snap-in the lens of your choice. Dependent pilot light illuminated when switch is on only. Snaps into 0.83" x 1.45" (21.08mm X 36.83 mm) hole. Fits panels up to .187" (4.75 mm thick) -
12.99 USD

Sealed Rocker Switches - SPST 3 Terminals - On-Off-On The most popular marine rocker switches ever made. Snaps into your .830" x 1.45" dash hole. Black polycarbonate actuator with raised dimples and are easily updated and changed. Terminals are 1/4" brass or copper/silver plated for long life. Up to 20 amps at 12v DC. Direct Carling replacement. These rocker switches offer dual seals to lock out the elements and are IP66/68 compliant and UL1500 compliant for ignition protection Model:RK19420S
12.99 USD

Illuminated Rocker Switch - w/ 8 snap-in colored lensesSPST On-On 1 Dependent Pilot Light & 1 ndependent Pilot light 25 amp load @ 12v DC. Silver contacts, brass blade terminals, a sealed black plastic housing, bezel and actuator make these switches weather resistant. Supplied with 2 each amber, clear, red and green lenses. Snap-in the lens of your choice. Independent pilot light comes on with load not switch position. Dependent pilot light comes on when switch is on. Snaps into 0.83" x 1.45" (21.08mm X 36.83 mm) hole. Fits panels up to .187" (4.75 mm thick) -
15.99 USD

Illuminated Toggle Switch - SPDT - 5 Terminals - On-Red/Off-White/On-White Clear plastic handle changes from clear to red. Neoprene seal in shaft. Can be wired directly or indirectly which will control the red illumination. 15/32" mounting stem fits into dash boards up to 1/8" thick. 1/4" brass blade terminals. 25 Amps @ 12v DCModel:TG40010
13.99 USD

Illuminated Toggle Switch - SPST - 4 Terminals - Off-White On-Red Clear plastic handle changes from clear to red. Neoprene seal in shaft. Can be wired directly or indirectly which will control the red illumination. 15/32" mounting stem fits into dash boards up to 1/8" thick. 1/4" brass blade terminals. 25 Amps @ 12v DCModel:TG40060
12.99 USD

Standard Rocker Switches - 2 terminals SPST - Off - On White actuators and a black mounting bezel. 25 amps. @ 12v DC. Brass screw terminals and internal silver contacts make these switches corrosion resistant. Snaps in your .830" x 1.45" dash hole in panels up to .25" thick. Model:RK40140W
10.99 USD