rocker switch illuminated 3 screw terminals

Normally off, momentarily on when button is pressed. Single Pole, Single Throw (SPST) Heavy-duty, non-corrosive construction With moisture-repellent insulators Brass case, stem, pushbutton, terminals and mounting hardware 6-36VDC Note: Only model 270876 (Cole Hersee # M626 includes the button cap)
19.99 USD

Normally off, with a variety of connections when pulled. Heavy-duty 10A Off/On switch controls two circuits. Brass case, stem, terminals and mounting hardware All knobs are screw-on type 6-36V DC 3/8" Mounting shaft, for panels to 1" thick Stems: 3/8" diameter x 1 1/4"L
16.99 USD

Illuminated 12V 4/Switch 47/8 X 41/2 Replaces in-line fuses. Panel is made of 5052 aluminum and powder coated for a great look. Terminals are insulated and switches are 12V illuminated. Label kit included. Dimensions: 6-1/2h x 4w.
24.99 USD

Mercury Push-To-Choke (Panel Mount) 3 This push to choke switch is designed for use in many Mercury outboard powered vessels. Glass filled polyester reinforced ignition switch body, tin plated internal contacts, six brass screw terminals. Brass back up nut and black plastic hex face nut. Replaces Mercury # 87-88107 & 87-88107A5. Simply mounts in a 7/8" hole. Rated at 15 amp magneto, 30 amp solenoid and 7 amp choke at 12v DC MP41000Sh. Wt. 1 lb.5/8" Max Dash Thickness
16.99 USD

For Lewmar Pro-Series Windlass wireless remote operation
46.99 USD

Switch Panel with Battery Test & 12V Outlet This innovative three gang switch panel has a battery test switch and gauge built in. Features a cigarette lighter plug with a 15amp fuse. Also includes 3 amp, 5amp and 10 amp fuses for the illuminated switches. Dimensions: 4 1/2''W x 6 1/2''L.
53.39 USD

4 Pos Ignition Switch Acc-Off-Run-Start - 1" Max. Dash Thickness Brass switch body, tin plated internal contacts, four brass screw terminals. Brass back up nut, washer and knurled chrome plated brass face nut with weather proof rubber cap seals out water splashed on the switch. Rated at 5 amps ignition, 5 amps solenoid and 10 amps accessory at 12v DC.
32.99 USD

Waterproof switches are rated to IP66 for use on ship decks and with an LED light to indicate when the circuit is on. Several configurations are available for almost any application. Recommended for replacements in waterproof electrical panels with rocker switches to ensure waterproof integrity. Includes both black and gray covers. Both switches and covers are interchangeable with similar switches used as original equipment on many common boat types. Activation Method: Rocker Draw: 0.018A from lighting Lighting: LED Mounting Hole Size: 1.450" x 0.830" (36.83mm x 21.08mm) Voltage Rating: 20A @ 12V DC/ 15A @ 24V DC
29.99 USD

Waterproof switches are rated to IP66 for use on ship decks and with an LED light to indicate when the circuit is on. Several configurations are available for almost any application. Recommended for replacements in waterproof electrical panels with rocker switches to ensure waterproof integrity. Includes both black and gray covers. Both switches and covers are interchangeable with similar switches used as original equipment on many common boat types. Activation Method: Rocker Draw: 0.018A from lighting Lighting: LED Mounting Hole Size: 1.450" x 0.830" (36.83mm x 21.08mm) Voltage Rating: 20A @ 12V DC/ 15A @ 24V DC
29.99 USD

Waterproof switches are rated to IP66 for use on ship decks and with an LED light to indicate when the circuit is on. Several configurations are available for almost any application. Recommended for replacements in waterproof electrical panels with rocker switches to ensure waterproof integrity. Includes both black and gray covers. Both switches and covers are interchangeable with similar switches used as original equipment on many common boat types. Activation Method: Rocker Draw: 0.018A from lighting Lighting: LED Mounting Hole Size: 1.450" x 0.830" (36.83mm x 21.08mm) Voltage Rating: 20A @ 12V DC/ 15A @ 24V DC
29.99 USD