rope

Single Section Ski Rope/Towline - 75' On The Edge towlines are made from the finest materials available. All Ski lines are pre-stretched and UV protected right off the shelf. No sinking handles to get caught on underwater debris or your prop, floating handles are standard on each and every towline.Single section line is great for recreational watersports. 75' long, single section, 3/8'' diameter, 12 strand. Floating handle included.
19.99 USD

Two Section Ski Rope/Towline - 75' On The Edge towlines are made from the finest materials available. All Ski lines are pre-stretched and UV protected right off the shelf. No sinking handles to get caught on underwater debris or your prop, floating handles are standard on each and every towline.Two section line is perfect for all watersports. Single handle detaches from mainline for safe and easy attachment to any 1 or 2 person tube. 75' long, two section, 7/16'' diameter, 16 strand. Floating handle included.
24.99 USD

Allows controlled release under loadThe award winning D2 Rope Clutch, built for big boat applications, allows for an easy and controlled release even at full holding power. Instead of just jamming the rope, the D2 clutch's Domino Cluster mechanism has a longer holding pattern for better grip and less rope wear. Full holding power is retained regardless of line type used, holding equally well on conventional double braids or Spectra, Dyneema, Vectran, and other modern lines. Fits line sizes from 5/16" (8mm) to 9/16" (14mm). Due to its variable geometry handle and the grip pattern of its dominoes, the D2 provides easy, controlled releases under load without fraying your lines. Application: High load applications on boats to 55', low load and control lines on larger boats Safe Working Load: 2650lb. (1200kg) Grip: Domino Cluster Height: 3.4"(88mm) Length: 6.14" (156mm) Width: Single 1.5"(38mm); Double 2.7" (68.5mm); Triple 3.9" (99mm) Hole Spacing: 4.2"L x 1.2"W (107mm x 70mm) Line Entry: 1.04" (26mm) Line entry and exit angle should not exceed 15 from center line. Line Exit: 1.3" (32mm) Warranty: Three years
14.99 USD

Designed for vangs, outhauls, shrouds where wire is used or for rope where loads are too high for regular bullet blocks. Roller bearings handle high loads better than ball bearings. Where applicable, blocks use #10 fasteners. Sheave diameter: 1 1/8" (29mm) Maximum line diameter: 5/16" Bearing type: Delrin roller bearings Each ShWt 0.5
13.99 USD

Designed for vangs, outhauls, shrouds where wire is used or for rope where loads are too high for regular bullet blocks. Roller bearings handle high loads better than ball bearings. Where applicable, blocks use #10 fasteners. Sheave diameter: 1 1/8" (29mm) Maximum line diameter: 5/16" Bearing type: Delrin roller bearings Each ShWt 0.5
16.99 USD

Designed for vangs, outhauls, shrouds where wire is used or for rope where loads are too high for regular bullet blocks. Roller bearings handle high loads better than ball bearings. Where applicable, blocks use #10 fasteners. Sheave diameter: 1 1/8" (29mm) Maximum line diameter: 5/16" Bearing type: Delrin roller bearings Each ShWt 0.5
35.99 USD

Minn Kota Trolling Motor Accessories. All Sold Separately 17"-25" Telescoping Extension Handle 24"-40" Telescoping Extension Handle Rope Handle (not shown)
12.99 USD

Allows controlled release under loadThe award winning D2 Rope Clutch, built for big boat applications, allows for an easy and controlled release even at full holding power. Instead of just jamming the rope, the D2 clutch's Domino Cluster mechanism has a longer holding pattern for better grip and less rope wear. Full holding power is retained regardless of line type used, holding equally well on conventional double braids or Spectra, Dyneema, Vectran, and other modern lines. Fits line sizes from 5/16" (8mm) to 9/16" (14mm). Due to its variable geometry handle and the grip pattern of its dominoes, the D2 provides easy, controlled releases under load without fraying your lines. Application: High load applications on boats to 55', low load and control lines on larger boats Safe Working Load: 2650lb. (1200kg) Grip: Domino Cluster Height: 3.4"(88mm) Length: 6.14" (156mm) Width: Single 1.5"(38mm); Double 2.7" (68.5mm); Triple 3.9" (99mm) Hole Spacing: 4.2"L x 1.2"W (107mm x 70mm) Line Entry: 1.04" (26mm) Line entry and exit angle should not exceed 15 from center line. Line Exit: 1.3" (32mm) Warranty: Three years
99.99 USD

Handle section only.
99.98 USD

Main Line Only
99.98 USD