cas-yachts.com

Wire Rope Clamps Wire Rope Clamp, 5/16IN SS

Make a secure loop or clamp multiple wire ends together with this clamp. 316 Stainless Steel
11.99 USD

Wire Rope Clamps Wire Rope Clamp, 1/4IN SS

Make a secure loop or clamp multiple wire ends together with this clamp. 316 Stainless Steel
8.99 USD

Wire Rope Clamps Wire Rope Clamp, 3/8IN SS

Make a secure loop or clamp multiple wire ends together with this clamp. 316 Stainless Steel
13.99 USD

75' World Cup Tow Rope

World Cup handle has a textured finish over a wood core. The 5' braided handle section is attached to 75' of 12-strand polypropylene line.
29.99 USD

D2 Rope Clutches Triple, 1/2 inch - 9/16 inch, 59.6oz

Allows controlled release under loadThe award winning D2 Rope Clutch, built for big boat applications, allows for an easy and controlled release even at full holding power. Instead of just jamming the rope, the D2 clutch's Domino Cluster mechanism has a longer holding pattern for better grip and less rope wear. Full holding power is retained regardless of line type used, holding equally well on conventional double braids or Spectra, Dyneema, Vectran, and other modern lines. Fits line sizes from 5/16" (8mm) to 9/16" (14mm). Due to its variable geometry handle and the grip pattern of its dominoes, the D2 provides easy, controlled releases under load without fraying your lines. Application: High load applications on boats to 55', low load and control lines on larger boats Safe Working Load: 2650lb. (1200kg) Grip: Domino Cluster Height: 3.4"(88mm) Length: 6.14" (156mm) Width: Single 1.5"(38mm); Double 2.7" (68.5mm); Triple 3.9" (99mm) Hole Spacing: 4.2"L x 1.2"W (107mm x 70mm) Line Entry: 1.04" (26mm) Line entry and exit angle should not exceed 15 from center line. Line Exit: 1.3" (32mm) Warranty: Three years
229.99 USD

Rope Deck Pipe - Chrome Plated Brass - 6 1/8'' x 4 3/8''

Rope Deck Pipe - Chrome Plated Brass - 6 1/8'' x 4 3/8'' Designed to have your anchor rode come up through deck with out letting the elements in. Cleans up the look of the deck also. Chrome Plated Brass. Maximum rope diameter: 1''. Outside dimensions: 6 1/8'' x 4 3/8''.
45.99 USD

Rope/Wire Bullet Blocks Block, 183 Single W/Swivel

Designed for vangs, outhauls, shrouds where wire is used or for rope where loads are too high for regular bullet blocks. Roller bearings handle high loads better than ball bearings. Where applicable, blocks use #10 fasteners. Sheave diameter: 1 1/8" (29mm) Maximum line diameter: 5/16" Bearing type: Delrin roller bearings Each ShWt 0.5
22.99 USD

Rope/Wire Bullet Blocks Block, 106 Exit Wire

Designed for vangs, outhauls, shrouds where wire is used or for rope where loads are too high for regular bullet blocks. Roller bearings handle high loads better than ball bearings. Where applicable, blocks use #10 fasteners. Sheave diameter: 1 1/8" (29mm) Maximum line diameter: 5/16" Bearing type: Delrin roller bearings Each ShWt 0.5
19.99 USD

Rope/Wire Bullet Blocks Block, 099 Single W/Becket

Designed for vangs, outhauls, shrouds where wire is used or for rope where loads are too high for regular bullet blocks. Roller bearings handle high loads better than ball bearings. Where applicable, blocks use #10 fasteners. Sheave diameter: 1 1/8" (29mm) Maximum line diameter: 5/16" Bearing type: Delrin roller bearings Each ShWt 0.5
16.99 USD

Rope/Wire Bullet Blocks Block, 108 Upright Lead