rope

Allows controlled release under loadThe award winning D2 Rope Clutch, built for big boat applications, allows for an easy and controlled release even at full holding power. Instead of just jamming the rope, the D2 clutch's Domino Cluster mechanism has a longer holding pattern for better grip and less rope wear. Full holding power is retained regardless of line type used, holding equally well on conventional double braids or Spectra, Dyneema, Vectran, and other modern lines. Fits line sizes from 5/16" (8mm) to 9/16" (14mm). Due to its variable geometry handle and the grip pattern of its dominoes, the D2 provides easy, controlled releases under load without fraying your lines. Application: High load applications on boats to 55', low load and control lines on larger boats Safe Working Load: 2650lb. (1200kg) Grip: Domino Cluster Height: 3.4"(88mm) Length: 6.14" (156mm) Width: Single 1.5"(38mm); Double 2.7" (68.5mm); Triple 3.9" (99mm) Hole Spacing: 4.2"L x 1.2"W (107mm x 70mm) Line Entry: 1.04" (26mm) Line entry and exit angle should not exceed 15 from center line. Line Exit: 1.3" (32mm) Warranty: Three years
224.99 USD

Designed for vangs, outhauls, shrouds where wire is used or for rope where loads are too high for regular bullet blocks. Roller bearings handle high loads better than ball bearings. Where applicable, blocks use #10 fasteners. Sheave diameter: 1 1/8" (29mm) Maximum line diameter: 5/16" Bearing type: Delrin roller bearings Each ShWt 0.5
21.99 USD

Designed for vangs, outhauls, shrouds where wire is used or for rope where loads are too high for regular bullet blocks. Roller bearings handle high loads better than ball bearings. Where applicable, blocks use #10 fasteners. Sheave diameter: 1 1/8" (29mm) Maximum line diameter: 5/16" Bearing type: Delrin roller bearings Each ShWt 0.5
18.99 USD

Designed for vangs, outhauls, shrouds where wire is used or for rope where loads are too high for regular bullet blocks. Roller bearings handle high loads better than ball bearings. Where applicable, blocks use #10 fasteners. Sheave diameter: 1 1/8" (29mm) Maximum line diameter: 5/16" Bearing type: Delrin roller bearings Each ShWt 0.5
16.99 USD

Designed for vangs, outhauls, shrouds where wire is used or for rope where loads are too high for regular bullet blocks. Roller bearings handle high loads better than ball bearings. Where applicable, blocks use #10 fasteners. Sheave diameter: 1 1/8" (29mm) Maximum line diameter: 5/16" Bearing type: Delrin roller bearings Each ShWt 0.5
19.49 USD

The Faze shape boasts a few features that are used in some of the higher end packages but maintains a soft flex and a large bolt on fin to create that true ride and track straight to teach the rider the basics. The Seven boots that come with the Faze are the entry-level hinge boot that brings the ease of entry to the masses. Using a floating tongue for fit, a lace system to allow for the different size feet, and the hinge, the Seven boot is sure to impress on the water, and in the wallet.135cm (mid 16.92", rocker 2.45", riders up to 180 lbs.)141cm (mid 16.92", rocker 2.75", riders 180 lbs. and up). Seven Hinge binding sizes: S/M(5-8), L/XL(9-13). Available Blank, with Seven bindings or as a package including Seven bindings, Proline rope and handle and "Fundamentals of Wakeboarding" DVD.
349.99 USD

The Proline 13" Ripper is the perfect handle for those up and coming groms out there. Today?s wakeboarders are getting younger and younger and they need a handle to accommodate their style. The Ripper by Proline has an XS diameter to fit the smaller hands of the younger generation riders. The Ripper has a soft EVA grip designed after Proline?s top selling EVA Gripstick handle. The Ripper handle also comes packaged with a 75ft non-stretch, 4-section Spectra mainline. No young shredder wants to be on the water without it.
114.99 USD

We offer these kits for those who want to replace their old halyards or install new low-stretch halyards. Comes with a Flemish eye at the rope end, and a thimble and sleeve, but no shackle. 7x19 oil-free stainless wire New England Ropes premium white Sta-Set yacht braid Rope end: Flemish eye Wire end: Thimble and sleeve No shackle
177.99 USD

We offer these kits for those who want to replace their old halyards or install new low-stretch halyards. Comes with a Flemish eye at the rope end, and a thimble and sleeve, but no shackle. 7x19 oil-free stainless wire New England Ropes premium white Sta-Set yacht braid Rope end: Flemish eye Wire end: Thimble and sleeve No shackle
122.99 USD

We offer these kits for those who want to replace their old halyards or install new low-stretch halyards. Comes with a Flemish eye at the rope end, and a thimble and sleeve, but no shackle. 7x19 oil-free stainless wire New England Ropes premium white Sta-Set yacht braid Rope end: Flemish eye Wire end: Thimble and sleeve No shackle
127.99 USD