rudder fixings

Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. This alloy is mostly zinc, but with measurable concentrations of cadmium (~0.1%) and aluminum (~0.25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface. When the anode is almost dissolved, it needs to be replaced.
15.99 USD

These gudgeons are built for 1/2" pins. Use with heavy-duty transom gudgeon (Model 252221) and gudgeon pin (Model 252239). Each requires 1/4" RHMS. Long straps require four fasteners; short straps require two.
48.99 USD

For dinghies up to 10', the 1/2" kit includes one short and one long pintle (R0621 and RO622), two gudgeons, a stainless steel retaining clip that acts as a spring to hold rudderhead in position, and backing plates. All stainless steel Fasteners not included
44.99 USD

These gudgeons are built for 1/2" pins. Use with heavy-duty transom gudgeon (Model 252221) and gudgeon pin (Model 252239). Each requires 1/4" RHMS. Long straps require four fasteners; short straps require two.
107.99 USD

These gudgeons are built for 1/2" pins. Use with heavy-duty transom gudgeon (Model 252221) and gudgeon pin (Model 252239). Each requires 1/4" RHMS. Long straps require four fasteners; short straps require two.
43.99 USD

Assists in sanding under rub rails, toe rails, along chines, and rudder posts. Improves "feel " 6 hole pattern
7.55 USD

Assist in sanding under rub rails, toe rails, along chines, and rudder posts. Improves "feel"
38.99 USD

Seastar Cylinder, Ba 150-7Tm,I/B Type SeaStar inboard hydraulic cylinder kits are designed for easy installation on a wide variety of inboard boats up to 50 feet. Features aluminum cylinders that when mounted 6" form rudder shaft center, provides 35 degrees port and starboard deflection of the rudder. The Cylinders also come complete with bleeder fittings. Suitable for dual station use with purchase of extra hardware. See chart for proper installation.Model:HC5318 Sh. Wt. 13 lbs.
579.99 USD

Seastar Cylinder, Ba 175-7Tm I/B Ty SeaStar inboard hydraulic cylinder kits are designed for easy installation on a wide variety of inboard boats up to 50 feet. Features aluminum cylinders that when mounted 6" form rudder shaft center, provides 35 degrees port and starboard deflection of the rudder. The Cylinders also come complete with bleeder fittings. Suitable for dual station use with purchase of extra hardware. See chart for proper installation.Model:HC5319 Sh. Wt. 13 lbs.
659.99 USD

Seastar Cylinder, Ba 150 Atm I/B Type SeaStar inboard hydraulic cylinder kits are designed for easy installation on a wide variety of inboard boats up to 50 feet. Features aluminum cylinders that when mounted 6" form rudder shaft center, provides 35 degrees port and starboard deflection of the rudder. The Cylinders also come complete with bleeder fittings. Suitable for dual station use with purchase of extra hardware. See chart for proper installation.Model:HC5314 Sh. Wt. 13 lbs.
399.99 USD