rudder fixings

5/16" x 1800' bulk Leaded Line, not on spools For use on crab and shrimp pots Sinking rope less likely to foul on prop or rudder Approx. tensile: 1600lb.
0.19 USD

Use this tiller bracket to attach a tiller to the rudder head. Made from electropolished stainless steel, 9"L x 1.5"W, with one 3/8" hole at the rudderhead end, and two 1/4" holes for through-bolting to the tiller. Tiller shim kits increase the width of the tiller to fit the exact rudder thickness. Made of HDPE, the shim kits are pre-drilled with holes to match the tiller bracket Use a single shim or multiple shims in combination to add whatever thickness is required
12.99 USD

Use this tiller bracket to attach a tiller to the rudder head. Made from electropolished stainless steel, 9"L x 1.5"W, with one 3/8" hole at the rudderhead end, and two 1/4" holes for through-bolting to the tiller. Tiller shim kits increase the width of the tiller to fit the exact rudder thickness. Made of HDPE, the shim kits are pre-drilled with holes to match the tiller bracket Use a single shim or multiple shims in combination to add whatever thickness is required
17.99 USD

Use this tiller bracket to attach a tiller to the rudder head. Made from electropolished stainless steel, 9"L x 1.5"W, with one 3/8" hole at the rudderhead end, and two 1/4" holes for through-bolting to the tiller. Tiller shim kits increase the width of the tiller to fit the exact rudder thickness. Made of HDPE, the shim kits are pre-drilled with holes to match the tiller bracket Use a single shim or multiple shims in combination to add whatever thickness is required
19.99 USD

The most commonly used drive type for sailing vessels. The linear drive moves the rudder directly by pushing the tiller arm or a rudder quadrant. The vessel displacement is the determining factor in selecting the proper drive unit. Always add 20% to the dry weight of the vessel to account for the added weight of fuel, provisions and people when determining your vessel's displacement.
1589.99 USD

The 16" Type 2 Linear Drive is a component for Raymarine SmartPilot autopilot system. The most commonly used drive for sailing vessels. The linear drive moves the rudder directly by pushing the tiller arm or a rudder quadrant. The vessel displacement is the determining factor in selecting the proper drive unit. Always add 20% to the dry weight of the vessel to account for the added weight of fuel, provisions, and people when determining your vessel's displacement. For boats to 44,000 lb. w/S3 Corepack Thrust: 1,050 lb. Maximum stroke: 16" Hardover Time: 14 sec. Maximum rudder torque: 14,700 lb. in. 1,660 Nm Power consumption: 48-72W Dimensions: 36.6"L x 4.5"W x 7.8"H
1749.99 USD

The 12" Type 2 Linear Drive is a component for Raymarine SmartPilot autopilot system. The most commonly used drive for sailing vessels. The linear drive moves the rudder directly by pushing the tiller arm or a rudder quadrant. The vessel displacement is the determining factor in selecting the proper drive unit. Always add 20% to the dry weight of the vessel to account for the added weight of fuel, provisions, and people when determining your vessel's displacement. For boats to 33,000 lb. w/S3 Corepack Thrust: 1,050 lb. Maximum stroke: 12" Hardover Time: 11 sec. Maximum rudder torque: 10,500 lb. in. 1,190 Nm Power consumption: 48-72W Dimensions: 30.6"L x 4.5"W x 7.8"H
1649.99 USD

Specially designed to make installation of Canada Metal shaft and rudder anodes easy, even in hard-to-reach areas. Unique ball-shaped head can be inserted and removed more easily than conventional tools. Ball size: 5/32" Fits shaft anodes: 3/4" - 2"dia
6.49 USD

Specially designed to make installation of Canada Metal shaft and rudder anodes easy, even in hard-to-reach areas. Unique ball-shaped head can be inserted and removed more easily than conventional tools. Ball size: 5/32" Fits shaft anodes: 3/4" - 2"dia
4.99 USD

Most propeller shafts are partially insulated from other parts of the vessel. The Relatively high-resistant electrical path isolates the propeller from anodes attached to the stern bearing, hull or rudder. The Martyr Propeller Nut Anode is attached to the propeller at its axis and revolves with it. Stud hole and stud are not provided.
25.99 USD