rudder fixings

These helms combine one or two bi-directional axial piston pumps with pilot check and make-up check valving. The result is a unit that prevents rudder feedback, is very efficient (even at low rpm) and is immediately adaptable to multi-station use. Hynautic number H21 has a 1" straight shaft, and the H25 has a 3/4" tapered shaft.
759.00 USD

A kayak-sized sea anchor for fishing and stable paddlingSea anchors designed for sailboats are generally far too big for your kayak. Here's a kayak-sized sea anchor, with adjustable drawstring openings at both ends to control drag and keep you from drifting off your favorite hole. This lets you save your energy for casting, not paddling back into position. The drogue also helps control rudder steering in advancing seas. Stows flat for easy storage on the deck 36"L x 6-12"W 11.2 oz. Blue
29.99 USD

The Type 1 hydraulic reversing pump, 4.9-14cu.in. is a component for Raymarine SmartPilot autopilot system. Designed for boats with existing hydraulic steering systems. To match the drive of your vessel, you need to know the size of the actual hydraulic cylinder RAM or RAMs that are mounted to the rudder on inboard engine boats or the RAM mounted to the drive on outboard engine boats. RAM capacity: 4.9 - 14 cu. in. Maximum stall pressure @ 12 volts: 750 psi Peak flow rate (no load): 67 cu. in. minimum Dimensions: 6.54"L x 4.17"W x 5.27"H
749.99 USD

$100 Mail-In Rebate Download Rebate Form (PDF) Specifically designed for popular Mercury Verado outboard engines The SmartPilot for Verado was designed for use with the popular single and twin Mercury Verado Outboards.* This complete autopilot system includes a ST6002 Control Head, S1G Course Computer for Verado, Fluxgate compass and hydraulic pump and dedicated hoses for a Verado outboard engine. The Verado SmartPilot does not require a rudder reference and has a built-in gyro. Autolearn software learns your boat's handling characteristics for optimal steering control Seamless SeaTalk integration with Raymarine multifunction displays and instruments systems NMEA compatible for easy GPS and chartplotter integration *Not suitable for parallel cylinder applications.
2569.99 USD

The Type 2 hydraulic reversing pump, 14-21cu.in. is a component for Raymarine SmartPilot autopilot system. Designed for boats with existing hydraulic steering systems. To match the drive of your vessel, you need to know the size of the actual hydraulic cylinder RAM or RAMs that are mounted to the rudder on inboard engine boats or the RAM mounted to the drive on outboard engine boats. RAM capacity: 14 - 21 cu. in. Maximum stall pressure @ 12 volts: 1450 psi Peak flow rate (no load): 122 cu. in. minimum Dimensions: 6.54"L x 4.17"W x 5.27"H
729.99 USD

NavPilot 511 NavNet Compatible Autopilot for Outboard Powered Boats (Pumpsets sold separately)The NavPilotTM 511 is a revolutionary autopilot designed for a variety of vessels. The operation modes include Auto (Heading control), Advanced Auto utilizing automatic ground tracking control, Auto Work for net towing and NAV mode (Course or Precision Cross Track control) when integrated with navigation sensors. The NavPilotTM 511 utilizes a self-learning and adaptive software algorithm, providing the ultimate in course keeping capability. Essential parameters dynamically adjust for vessel speed, trim, draught, tide and wind effects, dead band, weather, etc. These parameters are stored in system memory and continuously optimized. Simple one-touch mode selection provides reliable steering and course control. Multiple customizable display modes include Rudder angle, Heading, Highway, Compass rose, Wind, Nav Info, etc. FishHunterTM is a unique feature that forces a vessel to perform Orbit or Figure Eight maneuvers around fish targets when a target is received from a compatible Furuno sounder, sonar, or radar utilizing the TLL feature. Orbit mode is also invoked when a MOB is received from a Nav Receiver. Multi-station capability, maximum of six stations, is available through the utilization of a high speed network. Sh. Wt.15 lbs.NAVPILOT 511 - for inboard engines
2399.99 USD

NavPilot 500 NavNet Compatible Autopilot for Outboard Powered Boats (Pumpsets sold separately)The NavPilotTM 500 is a revolutionary autopilot designed for a variety of vessels. The operation modes include Auto (Heading control), Advanced Auto utilizing automatic ground tracking control, Auto Work for net towing and NAV mode (Course or Precision Cross Track control) when integrated with navigation sensors. The NavPilotTM 500 utilizes a self-learning and adaptive software algorithm, providing the ultimate in course keeping capability. Essential parameters dynamically adjust for vessel speed, trim, draught, tide and wind effects, dead band, weather, etc. These parameters are stored in system memory and continuously optimized. Simple one-touch mode selection provides reliable steering and course control. Multiple customizable display modes include Rudder angle, Heading, Highway, Compass rose, Wind, Nav Info, etc. FishHunterTM is a unique feature that forces a vessel to perform Orbit or Figure Eight maneuvers around fish targets when a target is received from a compatible Furuno sounder, sonar, or radar utilizing the TLL feature. Orbit mode is also invoked when a MOB is received from a Nav Receiver. Multi-station capability, maximum of six stations, is available through the utilization of a high speed network. Sh. Wt.15 lbs.NAVPILOT 500/OB - for outboard engines
2799.99 USD

The CR-914 kit is the most complete kit on the market today. It contains everything you need to build the boat except Sandpaper, Paint and Batteries. The kit takes between 13 to 15 hours to build. This time will very by skill level and the complexity of your paint job, multiple paint colors, graphics etc. The most time consuming part of the process is the sanding, fairing and painting of the hull bulb and rudder. We have had a number of our customers take their hulls to local auto body shops and have them paint the hulls with paint left over from painting cars. Auto body shops will toss out more paint then what is needed to paint a CR-914! KIT CONTENTS: Easy to follow building Instructions Molded One-Piece Hull and Deck ABS Molded Keel blade, Rudder and Lead Bulb Two piece aluminum mast and booms Deck and rigging fittings (gooseneck, spreaders etc.) Hi-Tec Ranger II-N two channel radio system. Quarter scale winch servo Precut Rip Stop Polyester Sails Wood Cradle Electronic mounting board assembly Heavy rudder linkage rod with two ball links 80lb Spectra Rigging line Velcro Antenna Conduit CA Glue and West System epoxy pack w/ Micro balloons Electronics come with a limited two year warranty Kit components covered for one year against manufactures defects All you need to add is whatever color paint you choose and 12 AA batteries
499.99 USD

All Walker Bay boats convert quickly and easily into a delightful sailing dinghy by using our straight forward sail kits. Designed to be rigged and on the water in just minutes, our sailing kits come complete with all lines, hardware and quality components required to harness the wind! Inspired by the leading edge in international sailboat design, our boats have an efficient hull that glides along in light breezes while our moderate sail plan provides control for heavier winds. Whether you are a novice or advanced sailor, you will love the ease of sailing with a Walker Bay Sail Kit. Innovative Features Adjustable tiller extension stows inside the tiller Anodized aluminum mast collapses for easy transportation and storage Reinforced mast support tube Center seat clamp and on/off ratchet block mainsheet system for reducing sheet load Composite or aluminum centerboard and rudder Multi position kick-up rudder retracts on impact Durable 3 oz Dacron sail with vision window Floating boom vang cleat for sail shape adjustment Color coded pre-cut rope system The 8 Recreation Sail Kit is a great addition to the WB8 boat. The kit is boomless so it is easier to rig and handle on the water; perfect for children or novice sailors. The rig comes with an easily collapsible 3 piece gaff mast , so it is easy to pack up and stow, while simple rigging make this boat easy for a beginner to sail. Features: 39 sq ft/3.6 sq m sail with 3 ounce Dacron sail cloth 9 ft/ 2.74 m mast collapses into two sections for easy transport or storage. Clear sail window for better visibility Boomless for easy maneuvering inside the boat Gaft mast connector Spars (mast and gaff) constructed of anodized aluminum to resist corrosion Telescoping tiller 3-position kick-up rudder Easy Quick Release button to attach/ detach rudder (on motor mount) Lightweight aluminum centerboard (cap also provided for when daggerboard not in use) Quick insertable daggerboard (plug also provided for when daggerboard not in use) Flotation bag for added buoyancy (Coast Guard certified flotation also in seats) Reinforced mast support Sail Area: 39 sq. ft. / 3.6 sq. m Mast Height: 9' / 2.74m The Walker Bay 8 Performance Sail Kit increases the sailing performance of the Walker Bay 8. This rig comes with high end rigging features like the adjustable retractable tiller extension and a 3-position composite kick-up rudder while still being easy to rig or breakdown and store. It is perfect for those who want more performance while still keeping it easy. Features: High visibility color sail 39 sq ft/3.6 sq m sail with 3 ounce Dacron sail cloth 14.7 ft/ 4.47 m mast collapses into two sections for easy transport or storage. Clear sail window for better visibility Spars (mast and boom) constructed of anodized aluminum to resist corrosion Conventional 6.5 ft boom optimizes upwind and downwind performance Instantly adjustable on/off ratchet block for easy mainsheet handling Retractable telescoping tiller extension 3-position
849.99 USD

All Walker Bay boats convert quickly and easily into a delightful sailing dinghy by using our straight forward sail kits. Designed to be rigged and on the water in just minutes, our sailing kits come complete with all lines, hardware and quality components required to harness the wind! Inspired by the leading edge in international sailboat design, our boats have an efficient hull that glides along in light breezes while our moderate sail plan provides control for heavier winds. Whether you are a novice or advanced sailor, you will love the ease of sailing with a Walker Bay Sail Kit. Innovative Features Adjustable tiller extension stows inside the tiller Anodized aluminum mast collapses for easy transportation and storage Reinforced mast support tube Center seat clamp and on/off ratchet block mainsheet system for reducing sheet load Composite or aluminum centerboard and rudder Multi position kick-up rudder retracts on impact Durable 3 oz Dacron sail with vision window Floating boom vang cleat for sail shape adjustment Color coded pre-cut rope system The 8 Recreation Sail Kit is a great addition to the WB8 boat. The kit is boomless so it is easier to rig and handle on the water; perfect for children or novice sailors. The rig comes with an easily collapsible 3 piece gaff mast , so it is easy to pack up and stow, while simple rigging make this boat easy for a beginner to sail. Features: 39 sq ft/3.6 sq m sail with 3 ounce Dacron sail cloth 9 ft/ 2.74 m mast collapses into two sections for easy transport or storage. Clear sail window for better visibility Boomless for easy maneuvering inside the boat Gaft mast connector Spars (mast and gaff) constructed of anodized aluminum to resist corrosion Telescoping tiller 3-position kick-up rudder Easy Quick Release button to attach/ detach rudder (on motor mount) Lightweight aluminum centerboard (cap also provided for when daggerboard not in use) Quick insertable daggerboard (plug also provided for when daggerboard not in use) Flotation bag for added buoyancy (Coast Guard certified flotation also in seats) Reinforced mast support Sail Area: 39 sq. ft. / 3.6 sq. m Mast Height: 9' / 2.74m The Walker Bay 8 Performance Sail Kit increases the sailing performance of the Walker Bay 8. This rig comes with high end rigging features like the adjustable retractable tiller extension and a 3-position composite kick-up rudder while still being easy to rig or breakdown and store. It is perfect for those who want more performance while still keeping it easy. Features: High visibility color sail 39 sq ft/3.6 sq m sail with 3 ounce Dacron sail cloth 14.7 ft/ 4.47 m mast collapses into two sections for easy transport or storage. Clear sail window for better visibility Spars (mast and boom) constructed of anodized aluminum to resist corrosion Conventional 6.5 ft boom optimizes upwind and downwind performance Instantly adjustable on/off ratchet block for easy mainsheet handling Retractable telescoping tiller extension 3-position
999.99 USD