safe-t-allert carbon monoxide detector

9V Carbon Monoxide Detector Does not require hard wiring to your boats electrical system, New state of the art sensor is not affected by common cleaning solvents, Time Weighted Average sensor technology, Ceiling or wall mountbattery .016 mA 85 dB at 10'4-3/4" Diameter x 1-1/2" Height1-year limited warrantySh. Wt. 1 lb.
99.99 USD

Flush Mt Carbon Monoxide Detector Affordable protection! Safe-T-Alert Carbon Monoxide detector is made to the new UL standard for Marine CO Detectors. Two level alarm not only warns of immediate CO danger, but also warns of any CO build up that occurs over time. Peal Alarm level memory stores CO level at time of alarm. The unit operates on 12V and draws less than 60ma. Available in flush mount. 3"Hx5.5"W1.3"D. Three year limited warranty.
49.99 USD

An ideal choice for installation on boats with enclosed areas and sleeping quarters that do not have a factory installed carbon monoxide detector or when additional carbon monoxide detectors are desired onboard. To install, simply mount to a wall or ceiling and connect the 9 volt batter. Extremely low battery draw of only .016mA. Meets UL 2034 specs. Types of Vapor Monitored: Carbon Monoxide Alarms: Visual & Audible Minimum Vapor Leel for Activation: 10% COHb Monitoring Algorithm: Time weighted Average Controls: Test & Mute Button Power Requirements: 9 volt battery (included) Sensors Required/Included: Built-In Sensors Monitored: One Internal Case Dimensions: 4-3/4" Dia. X 1-1/2"H Mounting Hardware Included/Required: Yes
109.99 USD

Carbon monoxide is generated whenever combustion occurs, including the operation of gas engines, as well as heating and cooking appliances. It's invisible, odorless, tasteless and deadly. Faulty venting or even a wind shift can create a dangerous situation, especially in confined areas like boat cabins. Typical symptoms of CO exposure can be mistaken for the flu or seasickness, making accurate onboard CO detection a necessity. The CO Sentinel Carbon Monoxide Detector is a good choice for smaller craft with an open design or for when genertor shutdown and remote location detection is not required. The CO Sentinel uses a microprocessor to measure CO levels. The time-weighted average CO measurement process constantly monitors all CO levels, eliminating most false alarms. The circuit is coated on both sides for added protection in the harsh marine environment. Operates on 12V DC. Meets UL 2034 specs. Types of Vapor Monitored: Carbon Monoxide Alarms: 85dB audible horn and red alarm light Minimum Vapor Level for Activation: 10% COHb Monitoring Algorithm: Time-weighted average Display Size: 4.25"L x 2.75"W x 1.75"D Controls: Test & Mute Buttons Power Requirements: 12V DC Sensors Required/Included: Built-in Sensors Monitored: One internal sensor Case Dimensions: 4.25"L x 2.75"W Mounting Hardware Included/Required: Included Wiring Hardware Included: Yes
119.99 USD

Surface Mount Carbon Monoxide Detector with Alarm Affordable protection! Safe-T-Alert Carbon Monoxide detector is made to the new UL standard for Marine CO Detectors. Two level alarm not only warns of immediate CO danger, but also warns of any CO build up that occurs over time. Peal Alarm level memory stores CO level at time of alarm. The unit operates on 12V and draws less than 60ma. Available in surface mount. 3"Hx5.5"W1.3"D. Three year limited warranty.
49.99 USD

CO Sentinel Carbon Monoxide Alarm The CMD-4MR carbon monoxide detector is available when generator shutdown and multiple location warning are not desired. 12 VDC operation. Features a state-of-the-art sensor that is unaffected by common cleaning solvents. Lowest current draw of any Fireboy-Xintex CO Detector. UL 2034 Listed for Marine use. CMD-4MR Dimensions: 3.5" L x 2.4" W x 1.3" DVoltage: 12 VDCWarranty: One (1) year limited warrantySh. Wt. 2 lbs.
114.99 USD

This new CO detec tor by Xintex combines the CO Sentinel Carbon Monoxide Detector with generator shutdown protection and multiple location warning taking CO detection and safety to the next level. Not only does the CO Sentinel Carbon Monoxide Detector warn you when dangerous CO fumes are detected it also causes all other connected Sentinel CO detectors to sound alarms and shuts down your connected generators. The CO Sentinel uss a microprocessor to measure accumalted Co levels. The computerized alarm uses a time-weighted average that doesn't react prematurely to brief and concetrated, yet harmless whiffs of CO, but knows to alert you in time of the cumulative effect of low concentrations. The circuit is coated on both sides for added protection in the harsh marin enviorment. Operates on 12V DC. Meets UL 2034 Specs. Types of Vapor Monitored: Carbon Monoxide Alarms: 85dB audible horn and red alarm light Minimum Vapor Level for Activation: 10% COHb Monitoring Algorithm: Time-weighted average Display Size: 4.25"L x 2.75"W x 1.75"D Controls: Test & Mute Buttons Power Requirements: 12V DC Sensors Required/Included: Built-in Sensors Monitored: One internal sensor Case Dimensions: 4.25"L x 2.75"W Mounting Hardware Included/Required: Included Wiring Hardware Included: Yes
159.99 USD

The Safe-T-Alert Carbon Monoxide (CO) Alarm is built to the UL 2034 CSA CE standard for marine CO alarms. It reacts to hazardous CO levels and eliminates nuisance alarms caused by nonhazardous CO levels. Features time-weighted averaging sensor software, a unique two-level alarm that informs you of a long-term build up of CO and a peak alarm level memory which stores the CO level at the time of the alarm. This is valuable information after the boat has been ventilated. Operates on 12V DC, yet it draws only 60mA the lowest draw in the industry. Three year limited warranty. Types of Vapor Monitored: Carbon monoxide Alarms: 85dB & color coded Minimum Vapor Level for Activation: 70PPM within 60 minutes Monitoring Algorithm: Time-weighted average Display Size: 3 H x 5.5 W Controls: Test & Mute buttons Power Requirements: 12-24V DC Sensors Required/Included: Built-in Sensors Monitored: One internal sensor Case Dimensions: 3 H x 5.5 W x 1.3 D Three year limited warranty.
79.99 USD

Fume/Fire/Water Detector This unit works to protect you in three ways. First, it detects explosive vapors. Second, it detects fire through a 180(0) thermal switch. Third, is protects you from high water in the bilge through a flood sensor. Includes all sensors needed for basic monitoring, additional fume sensor (SA-186-S) may be added to monitor propane locker, or gen-set area. Measures 31/4"W x 2 3/4"Hx 3/4"D.
199.99 USD

Gasoline Fume Detector Keep your friends and family safe! This affordable unit detects dangerous fuel vapors, propane, methane, hydrogen (from batteries), and many other explosive vapors. Available in dash mount unit. 1 fume sensor is included, but an additional sensor can be added to either unit for monitoring of a propane locker or gen-set area. On/Off/Test switch insures smooth operation. 2 1/8" diameter.
99.99 USD