safe-t-allert carbon monoxide detector

Protect your family and your investment. Easy, snap together assembly for ease in installation. UL listed to Marine Combustible Gas Indicators UL 1110. Power 12 VAC, operational range 7-16 volts. 200 milliamp (.2 amp.) current draw. Alarm Trigger: 20% or less of the lower explosive limit of gasoline. Fumes Detected: Gasoline, hydrogen from batteries, propane, alcohol, acetone, methane and other explosive vapors. On/Off/Test Switch. For one touch analysis of detector performance. Size: SA-1 fits standard 2-1/8" in dash panel blank. SA-1XL: 3-1/4"W x 2-3/4"H x 3/4"D.
149.99 USD

Detect dangerous gas fumes before they make trouble Now every inboard and sterndrive powerboat owner can afford the protection that a gasoline vapor detector provides. The M-1 fits in a standard 2 instrument hole and includes an MS-2 sensor. Draws 210mA. 7 14V DC. 2"dia. cutout. Alarm sounds at 16%-20% of the lower explosive level. Types of Vapor Monitored: Gasoline and propane Alarms: 85dB audible horn Minimum Vapor Level for Activation: 18-20% LEL @70 F Monitoring Algorithm: Instantaneous readings Display Size: 2" diameter Controls: Test/Mute button Power Requirements: 12V DC Sensors Monitored: One remote sensor Case Dimensions: 2" diameter Wiring Hardware Included: 20' sensor wire only
152.99 USD

Gas Fume Detector W/Auto Bilge Blow This fuel vapor monitor is ideal for boats under 20 feet. High tech, styling, compact size, and drop-in dash mounting make it the perfect choice for the safety conscious recreational boater. Place sensor where fuel vapors may build up and then connect it to the back of dash unit. Whenever gas fumes build to an unsafe level, the warning alarm sounds, and your blower turns on automatically. A fume detector can also help detect fuel leaks before they lead to an explosive situation.
199.99 USD

Gasoline Fume Detector 2" In-Dash Mount Keep your friends and family safe! This affordable unit detects dangerous fuel vapors, propane, methane, hydrogen (from batteries), and many other explosive vapors. Available in dash mount unit. 1 fume sensor is included, but an additional sensor can be added to either unit for monitoring of a propane locker or gen-set area. On/Off/Test switch insures smooth operation. 2 1/8" diameter.
99.99 USD

Add extra fire protection to your boat Easy-to-install 9V battery-powered ionization smoke and fire alarm detects fast flaming fires, which consume combustible materials rapidly. Recommended installation is one in each sleeping accommodation, salon, galley, engine/generator room, electrical control room for adequate protection. Meets NFPA requirement 302 UL217-listed for recreational vehicles Battery included Built-in 85 dB alarm horn 4-3/4"dia. x 1-3/4"H One year warranty
15.99 USD

Xintex has gone one step further than the M-1 with the MB-1. When fumes are detected in your engine compartment, it automatically turns on your engine blower to begin exhausting potentially dangerous fumes, and alert you to the problem. The 10-amp relay will handle all but the largest blowers. 2" dia. cutout. Includes MS-2 sensor for propane or gasoline. Types of Vapor Monitored: Gasoline and propane Alarms: 85dB audible horn Minimum Vapor Level for Activation: 18-20% LEL@70 F Display Size: 2" diameter Controls: Test/Mute button Power Requirements 12V DC Sensors Monitored: One remote sensor Mounting Hardware Included/Required: Included Wiring Hardware Included: 20' sensor wire only
182.99 USD

Carbon Free Additive 12oz. Specially designed to prevent and remove harmful carbon deposits that cause ring sticking and engine failure in 2 and 4 cycle marine engines, regular use of Carbon Free will prevent carbon deposit build-up, prevent ring sticking, prevent piston seize-up, improve engine performance, and prolong engine life. 12 oz. bottle treats 60 gallons.
12.99 USD

Manual 3F Inflatable PFD-Navy/Carbon ManualNavy/Carbon (USCG approved Type III)
199.99 USD

Proteck 4.5 Carbon Future set...Tri fin set...Extra rigid core with flexible edges...Compatible with Future system.
71.00 USD

Carbon Fiber Outrigger Poles Black SMITH'S new carbon fiber outrigger poles are affordable, tough, stronger and stiffer than aluminum poles. Bases are bar reinforced and fit virtually all popular pole holders ranging from 1-1/2" ID, common for stainless pole holders, up to 1-5/8" common for aluminum pole holders. A precision machined fitment sleeve is provided with each pole to be used with larger aluminum holders. Base is drilled to receive locking pins. Each pole is 3 gradually tapered sections for superior strength distribution, the smaller sections can be colapsed down into the larger sections for compact storage. When extended the sections wedge lock together making the pole effectively a single 5 meter long piece. Hard anodized colars at each section and the tip are available in 3 colors, Gold, Silver, or black. Poles are natural carbon fiber deep gray. 3 stainless eyelets for rigging. Sold in pairs.
999.99 USD