suzuki 40 FUEL PUMB

Suzuki 5/16" Barb Chrome Plated Brass Female Fuel Line Engine Connector
9.99 USD

Suzuki 1/4 NPT Chrome Plated Brass Male Tank Connector
14.99 USD

1/4 NPT Chrome Plated Brass Male Tank Connector For Use with Engines Over 75HP
14.99 USD

In-line disposable filters trap dirt and other metallic particles. Design allows immediate inspection of your fuel condition through clear vial. Not for use on inboard engines More than 18 sq.in. of pleated medial material filter to 40 microns
6.49 USD

The GFS 10 helps optimize performance while taking the worry out of fuel management. The GFS 10 tracks fuel flow use and sends the data to your chartplotter via the Garmin CANet or NMEA 2000 network. Works with most gasoline-powered inboard, I/O and outboard engines. Unlike other fuel flow sensors, the GFS 10 will include fuel level sensing capability when connected to an existing analog fuel gauge or resistive fuel tank sensor. Design: 3/8 " barbed fittings Maximum flow rate: up to 50 GPH per engine Minimum flow rate: 2 GPH Maximum back pressure: 0.5 PSI at 20 GPH/1.0 PSI at 40 GPH Supply voltage: 10-22 V Fire resistant: Yes. Complies with U.S. Coast Guard standards Compatible with GMI 10 Multifunction Graphic Display GPSMAP 4000 series and 5000 series chartplotters GPSMAP 400 series and 500 series chartplotters (require a CANet kit).
199.99 USD

Moeller permanent tanks are favored by quality boat builders. Cross-linked rotationally molded polyethylene fuel tanks are UV stabilized and impervious to corrosion and ethanol-enhanced fuel. They meet all ABYC, NMMA and U.S. Coast Guard regulations. They re equipped with an electrical fuel sending unit for use with a dash-mounted gauge. Measurements do not include fittings. Add 2 1/2" to height for fill neck. Allow for hydrocarbon swelling that adds about 3% to measurements in all directions. Quality features: Fittings with highest O.D. and I.D. specifications, so they have the highest level of input flow available during refueling. Machined aluminum 3/8" withdrawal fitting swivels 360 for ease of installation Ideal for gasoline or diesel (order return kit Model 8843559) Includes machined aluminum fill spouts and vent fittings molded into the tank shell
399.99 USD

Keep your fuel lines operating at peak performance to ensure your outboard motor runs smoothly. Moeller's fuel line connectors are built to strict OEM specifications.
17.99 USD

Dri-Fuel/Fuel Additive QuickSilver Dri-Fuel helps eliminate stalling and hard starting due to moisture in fuel. For use with both 2 and 4-cylce engines.
7.99 USD

These rugged permanent tanks are molded of gray cross-linked polyethylene for strength and no-leak durability. Each tank is individually inspected and tested to assure its quality. Includes electronic fuel-level sending unit and fuel withdrawal fitting. Meet NMMA and USCG non-commercial standards Made to hold Gasoline only 40 G: 51"L x 25 3/4"W x 13"H 55 G: 51"L x 25 1/2"W x 16"H
434.99 USD

In-line disposable filters trap dirt and other metallic particles. Design allows immediate inspection of your fuel condition through clear vial. Not for use on inboard engines More than 18 sq.in. of pleated medial material filter to 40 microns
6.29 USD