tank monitoring sender

S.S. Fuel Sender Electric Sending units eliminate installation concerns with tank baffles or walls commonly found in swing arm style units. These senders are quality constructed of non-corrosive components and feature a stainless steel and composite sensing shaft; reducing false signals and providing years of reliable use. Industry standard 5-bolt mounting flange. Ideal for gasoline or diesel fuels. Length to order should be at least 1" less than tank depth for plastic tanks, and 3/4" less for metal tanks. Comes complete with mounting screws and gasket.
59.99 USD

Universal Electric Sending Unit 4" to 27" Kit with Dash Mounted Gauge 33 to 240 Ohm's. Internal measurement components will not rust or corrode! All electrical senders and dash-mounted gauge are calibrated to 33 to 240 Ohm's an industry standard. 100% inspected during manufacturing to ensure the highest quality. Swingarm float rotates easily in 90 degree increments for tank wall or baffle clearance! Comes complete with 5 hole gasket and mounting screws.
57.99 USD

System uses our patented digital Mirus detector cells to accurately measure and display fluid levels inside grey, fresh and black water holding tanks. Sensors measure the fluid levels through any non-metallic tank wall by using a unique low impedance differential electrical field. Sensors avoid the common problem of misreading debris buildup on the inside tank wall that affects all capacitive sensor based systems. No calibration required "Plug and Go" wiring "Peel and Stick" sensors Includes four sensors per tank for three holding tanks Panel: 3.5"H x 5.5"W
219.99 USD

Water Temperature Sender Sending unit for Gaffrig gauges.
11.99 USD

Tank Monitor 12V The Tank Monitor provides convenient, reliable, maintenance-free monitoring of one to four fresh, gray and waste water tanks. All components are mounted outside of the tanks for dependable operation, eliminating the need for special tank fittings and the inevitable maintenance of internally mounted tank sensors. The tank monitor has no moving parts. The indicator panel clearly displays a tank's contents (or reserve) by selecting the tank on the touch pad. The tank's content is displayed at quarter tank intervals (i.e. EMPTY, 1/4, 1/2, 3/4 and FULL) with easy to understand international symbol labels (which are provided). The Indicator Panel is rugged, flush mounted and has no protruding parts. The tank module senses the contents of the tank and sends a signal to the indicator panel. The electronic components are completely encapsulated, protecting them from the harshest environments. 12V. For use on non-conductive tanks (polyethylene, fiberglass, etc.). NOT FOR USE ON FUEL TANKS.Benefits All parts are mounted outside of the tanks - eliminates need for special tank fittings Reliable electronic design protected for the marine environment Can be used with any polyethylene or fiberglass fresh, gray and waste water tanks Easy to use No maintenance required Gold-plated connectors ensure consistent and trouble free performance Simple installation Low power consumption No internal probes or floats Flush-mounted indicator panel has a smooth surface (no protruding switches or gauge) Each unit is assembled by hand, individually tested and backed by Raritan's one-year Limited Warranty and legendary technical support
344.99 USD

TANK LIDBAITUT-13
16.99 USD

FUEL TANK 6.6 GAL
72.99 USD

Selected tank elbows - choose the model recommended by the manufacturer of your tank.
4.49 USD

The men's Block Tank by RVCA is made of 100% cotton. The top half on the tank is white in white in color connected by a seam to the lower half of the tank black in color, there is a small RVCA embroidery on the top left side of the tank.
24.00 USD

Doggie Tank Top is available in Blue (Aqua Pup) or Red (Wake Pooch). Available sizes: XS (pictured on "Gizmo" Miniature Yorkie) up to 4 lbs S - 5 to 10 lbs M - 11 to 23 lbs L - 24 to 45 lbs XL - 46 to 70 lbs XXL - 71 to 85 lbs XXXL - 86+ lbs . 100% Cotton.
19.98 USD