throttle control unit

Throttle Hold Kit: One per lever prevents throttle creep.
54.99 USD

Throttle Hold Kit Designed for I/Os or straight inboards with hydraulic transmissions, the S series controls are designed to give years of smooth service. The single version can be used as the throttle or the clutch on a single-engine boat. The twin version can control two throttle or two clutches on a twin engine, or one clutch and one throttle on a single engine. Covers are heavy plated chrome brass, arms are chrome, and the hanger plate is Stainless Steel.Model :306997Parts : Throttle Hold KitSh. Wt. 1 lb.
49.99 USD

Highly polished, investment cast stainless steel, marked "Fast-Slow" and "Fwd-Rev". Designed to fit Edson Dual Lever Engine Controls Older pedestals with 10-32 engine control shaft threads must be retapped to 1/4"-28 to accept the mounting screws supplied with these handles
72.99 USD

External adjustable throttle brake to avoid throttle creep and overcome governor back pressure. For shift and throttle on sailboats
549.00 USD

C20 Control Unit Time and temperature control - save money in reduced electrical usage! The controller, designed exclusively for Kasco, will only operate when both the timer and thermostat are activated, unlike regular timers which run the motor everyday at a set time. This controller will only operate when the temperature requires it!
169.99 USD

Replaces your hand throttle with a foot pedal that makes you feel like you're behind the wheel of your automobile. When released, the Hot Foot automatically returns your engine to the idle position thanks to a strong stainless spring. Mounts directly to the deck of the boat and uses standard control cables Aluminum pedal Stainless hardware Non-stick bearing surfaces Toe clip for added security under rough conditions
99.99 USD

Replaces your hand throttle with a foot pedal that makes you feel like you're behind the wheel of your automobile. When released, the Hot Foot automatically returns your engine to the idle position thanks to a strong stainless spring. Mounts directly to the deck of the boat and uses standard control cables Aluminum pedal Stainless hardware Non-stick bearing surfaces Toe clip for added security under rough conditions
99.99 USD

Mount this weatherproof push-button switch on the spokes of your steering wheel. To make an adjustment, tap it with your thumb no need to remove your hands from the wheel. Can be used for either trim or jack plates. The complete Steer-N-Trim Kit includes wiring concealed behind a black matte finish housing to replace your existing 90 bezel. Designed to work with Teleflex and Morse mechanical steering systems. The stand-alone control includes an externally mounted coil cord that will not wrap around the wheel. Use with any steering system. Each includes mounting instructions and hardware.
64.99 USD

Mount this weatherproof push-button switch on the spokes of your steering wheel. To make an adjustment, tap it with your thumb no need to remove your hands from the wheel. Can be used for either trim or jack plates. The complete Steer-N-Trim Kit includes wiring concealed behind a black matte finish housing to replace your existing 90 bezel. Designed to work with Teleflex and Morse mechanical steering systems. The stand-alone control includes an externally mounted coil cord that will not wrap around the wheel. Use with any steering system. Each includes mounting instructions and hardware.
64.99 USD

Twin Sr Series Control 100 percent Stainless Steel Housing! These top mounted, dual lever, single function controls can be used on I/Os, inboards, or inboards with hydraulic transmissions. The single version can be used as the throttle or the clutch on a single-engine boat. The twin version can control two throttle or two clutches on a twin engine, or one clutch and one throttle on a single engine. Housing is 100 percent stainless steel, levers are marine grade chrome, and hanger is rugged cast stainless.
349.99 USD