thru hull hose quick disconnect

Ideal intake and discharge for pumps and livewell aerators. Corrugated polyethylene resists bilge acids and sea water. Not for use in below-waterline thru-hull connections. Clamping cuff every foot. Standard pack is 50'. White. Application: Bilge pump discharge. Do not attach to thru-hulls below waterline Material: Corrugated polyethylene, with clamping cuff every foot Reinforcement: None Temperature: N/A Burst Strength: N/A Vacuum Rating: 20 Approvals: N/A Price is per foot
1.79 USD

Ideal intake and discharge for pumps and livewell aerators. Corrugated polyethylene resists bilge acids and sea water. Not for use in below-waterline thru-hull connections. Clamping cuff every foot. Standard pack is 50'. White. Application: Bilge pump discharge. Do not attach to thru-hulls below waterline Material: Corrugated polyethylene, with clamping cuff every foot Reinforcement: None Temperature: N/A Burst Strength: N/A Vacuum Rating: 20 Approvals: N/A Price is per foot
1.79 USD

Not only are they original equipment on Hatteras, Hunter, Wellcraft, and Sea Ray yachts, but these easy-to-use quick-connect fittings make your plumbing installation and repairs a snap! Leak-free connections can be made with hot or cold potable, fresh - or saltwater in boats and RVs. No screwing or clamping required. Connectors are best used with stiff polyethylene Flexpipe marine-grade piping that gives the same reliability of metal piping without corrosion. Piping is NSF listed and FDA recognized To install, cut piping to correct length, then push pipe into fitting until it hits the internal stop To disconnect, push in on fitting collar and hold down while removing pipe Rated to 100 PSI and temperatures of -40 to +180 F All 15mm fittings are black, and all 5/8" fittings are white Mfr. s one year limited warranty
9.29 USD

Environmentally safe formula removes waterline and rust stains from all hull surfaces. Simple wipe on and rinse off formula makes cleaning your hull quick and easy. Contains no strong acids or harsh chemicals. Hull cleaner will discolor some antifouling bottom paints so take precautions to prevent contact. Much safer to use and less aggressive to your hull than acid-based bottom cleaners. Use on fiberglass, metal, glass, rubber and painted surfaces Wipe on, rinse off; no rubbing required 32oz.
14.99 USD

Hull Hugr Corner Dock Bumber These corner dock bumpers measure 10" by 10" by 4" by 2 1/2". Manufactured from UV resistant and tear proof vinyl/polyester trilaminate for a long life. High density closed cell polyurethane foam filling provides cushioning and insurance against soggy foam filled fenders. 4 corrosion proof grommets, 1 in each corner allow for quick and easy mounting.
10.99 USD

For potable water fill, sink and shower drains and livewell aerators. FDA-approved vinyl compounds are supported by a rigid black vinyl helix. Not recommended for sanitation or below-waterline thru-hull connections. Sold per foot; 50' maximum continuous length. Application: Bilge pump discharge, drains, water tank fill Material: FDA formula PVC Reinforcement: Vinyl helix Temperature Range: Ambient temperatures Approvals: FDA Length: 50'
1.89 USD

For potable water fill, sink and shower drains and livewell aerators. FDA-approved vinyl compounds are supported by a rigid black vinyl helix. Not recommended for sanitation or below-waterline thru-hull connections. Sold per foot; 50' maximum continuous length. Application: Bilge pump discharge, drains, water tank fill Material: FDA formula PVC Reinforcement: Vinyl helix Temperature Range: Ambient temperatures Approvals: FDA Length: 50'
2.19 USD

For potable water fill, sink and shower drains and livewell aerators. FDA-approved vinyl compounds are supported by a rigid black vinyl helix. Not recommended for sanitation or below-waterline thru-hull connections. Sold per foot; 50' maximum continuous length. Application: Bilge pump discharge, drains, water tank fill Material: FDA formula PVC Reinforcement: Vinyl helix Temperature Range: Ambient temperatures Approvals: FDA Length: 50'
2.49 USD

For potable water fill, sink and shower drains and livewell aerators. FDA-approved vinyl compounds are supported by a rigid black vinyl helix. Not recommended for sanitation or below-waterline thru-hull connections. Sold per foot; 50' maximum continuous length. Application: Bilge pump discharge, drains, water tank fill Material: FDA formula PVC Reinforcement: Vinyl helix Temperature Range: Ambient temperatures Approvals: FDA Length: 50'
2.69 USD

Easy-to-install fittings include a flapper valve to keep water from seeping into your exhaust outlet. Strong and light-weight Non-corroding fittings Made of fiberglass and fire-retardant Black
82.99 USD